Solar-driven water desalination technologies are rapidly developing with various links to other renewable sources. However, the efficiency of such systems severely depends on the design parameters. The present study focused on using graphene oxide (GO) with the Φ = 0.2, 0.4 and 0.6 wt.% dispersed in paraffin, as phase-change materials (PCMs), to improve the productivity of a solar still for desalination applications. The outcomes showed that by adding more graphene oxide to paraffin, the melting temperature got reduced. Solar still with GO/paraffin showed 25% productivity improvement in comparison with the solar still with only PCM. The obtained Nusselt number during the melting time also represented that free convection heat transfer into the melted region of the solar still has been enhanced by adding dispersed GO to the PCM, compared to the base paraffin. Also, increasing the hot wall temperature augments the Nusselt number. Finally, an empirical equation was derived to correlate the average Nusselt number as a function of Rayleigh number (Ra), the Stefan number (Ste), the subcooling factor (Sb), and the Fourier number (Fo). The obtained correlation depicted that Nusselt number enhancement has a reverse relation with Fourier number.
The heating and cooling industry underpins everything we do, e.g., manufacturing, commercial and residential applications. Many of these applications invariably use mechanical refrigeration technologies, consequently contributing significantly to the environmental impacts of the refrigeration, air conditioning, and heat pump (RACHP) industry both through direct and indirect emissions of CO2. To reduce these emissions, research and development worldwide aim to improve the performance of conventional systems and the development of new refrigeration technologies of potentially much lower environmental impacts. As we transition to a low carbon economy, there are sizable environmental and economic benefits from developing and using efficient, innovative, low carbon heating and cooling technologies that reduce energy use and carbon emissions. This paper provides an up-to-date and comprehensive critical review and evaluation of recent advances in emerging alternative heating and cooling technologies that have the potential to reduce the environmental impacts of refrigeration in the RACHP sector. The paper highlights the basic working principle of operation, its main applications, the challenges and opportunities in penetrating the market. The paper also highlights further research and development needed to accelerate the development and adoption of these alternative refrigeration technologies by the sector. Most of the technologies reviewed have a Technology Readiness Level (TRL) of 3–4, except electrocaloric technology which is less ready compared to its counterparts with a TRL of 1–2 at this stage. Furthermore, most technologies have capacities ranging between a few kilowatts to a maximum of 7 kW with a coefficient of performance COP between 1 and 10 reported in the literature.
Natural ventilation is gaining more attention from architects and engineers as an alternative way of cooling and ventilating indoor spaces. Based on building types, it could save between 13 and 40% of the building cooling energy use. However, this needs to be implemented and operated with a well-designed and integrated control system to avoid triggering discomfort for occupants. This paper seeks to review, discuss, and contribute to existing knowledge on the application of control systems and optimisation theories of naturally ventilated buildings to produce the best performance. The study finally presents an outstanding theoretical context and practical implementation for researchers seeking to explore the use of intelligent controls for optimal output in the pursuit to help solve intricate control problems in the building industry and suggests advanced control systems such as fuzzy logic control as an effective control strategy for an integrated control of ventilation, heating and cooling systems.
Combined natural and forced convective heat transfer arise in many transport processes in engineering devices and in nature, which is frequently encountered in industrial and technical processes, including electronic devices cooled by fans, heat exchangers placed in a low-ve-locity environment, and solar receivers exposed to winds. In this study, the effects of design parameters have been experimentally investigated for the air-side thermal performance under combined (natural and forced) convection of the rectangular plate heat sinks, and the values of optimum design parameters were sought. Many ideas for improving cooling methods have been proposed, one of which is the heat sink. In this work, the average Nusselt number (Nu) and thermal resistance of a simple base rectangular plate and five vertical rectangular plate heat sinks with different numbers of fins under natural and combined convection were exper-imentally investigated to obtain the maximum average Nu and minimum thermal resistance for various Reynolds numbers (Re) from 2300 to 40000, Rayleigh numbers (Ra) from 1300000 to 13000000, and Richardson numbers (Ri) from 0.4 to 3. Also, in this experiment, fin spacing (P) was varied from 2.8 mm to 14.6 mm and the dimensionless P/H ratio was varied from 0.1 to 0.49. The flow velocity varied in the range of 2 to 8 m/s under combined convection. Based on the effects of Ri and Re, two empirical equations for natural and also for combined con-vection heat transfer were derived to calculate the average Nu. The average deviation for these two equations is about 7%. The outcomes of this research can be beneficial for engineers who work on electronics cooling systems.
1 December 2018 in Thermal Science and Engineering Progress