Nanocomposites with polymer matrix provide tremendous opportunities to investigate new functions beyond those of traditional materials. The global community is gradually tending toward the use of composite and nanocomposite materials. This review is aimed at reporting the recent developments and understanding revolving around hybridizing fillers for composite materials. The influence of various analyses, characterizations, and mechanical properties of the hybrid filler are considered. The introduction of hybrid fillers to polymer matrices enhances the macro and micro properties of the composites and nanocomposites resulting from the synergistic interactions between the hybrid fillers and the polymers. In this review, the synergistic impact of using hybrid fillers in the production of developing composite and nanocomposite materials is highlighted. The use of hybrid fillers offers a viable way to improve the mechanical, thermal, and electrical properties of these sophisticated materials. This study explains the many tactics and methodologies used to install hybrid fillers into composite and nanocomposite matrices by conducting a thorough analysis of recent research. Furthermore, the synergistic interactions of several types of fillers, including organic–inorganic, nano–micro, and bio-based fillers, are fully investigated. The performance benefits obtained from the synergistic combination of various fillers are examined, as well as their prospective applications in a variety of disciplines. Furthermore, the difficulties and opportunities related to the use of hybrid fillers are critically reviewed, presenting perspectives on future research paths in this rapidly expanding area of materials science.
Syntactic foam made from hollow glass microspheres (HGM) in an epoxy matrix has proven to be a good material with a strong structural strength. Understanding filler particle size variation is important in composite material formation, especially in syntactic foam, because of its numerous applications such as aerospace, marine, and structural purposes. In this present work, the effects of particle variation in different sizes (20–24 µm, 25–44 µm, 45–49 µm, and 50–60 µm) on the mechanical properties of the syntactic foam composites with a focus on flexural strength, modulus, and fracture surfaces are investigated. The particle sizes are varied into five volume fractions (5, 10, 15, 20, and 25 vol%). The results show that the highest flexural strength is 89 MPa at a 5 vol% fraction of 50–60 µm particle size variation with a 69% increase over the neat epoxy. This implies that the incorporation of HGM filler volume fraction and size variation has a strong effect on the flexural strength and bending modulus of syntactic foam. The highest particle size distribution is 31.02 at 25–44 µm. The storage modulus E’ increased at 30 °C, 50 °C, and 60 °C by 3.2%, 47%, and 96%, respectively. The effects of wall thickness and aspect ratio on the size of the microstructure, the fracture surfaces, and the viscoelastic properties are determined and reported accordingly.
In this study, a sandwich composite structure was fabricated with core syntactic foam composites (SFC) reinforced with face-sheets of combined kenaf and glass fibers. The core SFC was made from hollow glass microsphere (HGM)/epoxy resin mixture. The focus of this study is to design a suitable material for marine, automobile, and structural applications by investigating the water absorption capacity, hardness, buoyancy, and acoustic resistance level of the sandwich composite. Four sequences of face-sheet reinforcement [e.g. kenaf-kenaf(KK); glass-glass(GG); glass-kenaf(GK), and kenaf-glass(KG)] were adopted. The results show that the KK sandwich absorbed more water, with buoyancy level of 0.329% than other sequence. GK shows the highest sandwich in hardness strength with 58Hv, and 35% more than the KK, while there was no significant difference in the sound pressure level of the sandwich composite.
30 January 2023 in Composites and Advanced Materials
In this work, mechanical performance on sandwich composites consisting of syntactic foam filled with hollow glass microsphere in an epoxy resin matrix as the core material and hybrid kenaf/glass fibers face-sheet based composites panel is studied. The main purpose of this work is to design a suitable lightweight composite panel material for structural application. Four different sequences of face-sheet reinforcement (e.g., kenaf-kenaf; glass-glass; glass-kenaf, and kenaf-glass) were adopted. In this study, the mechanical properties and failure modes are carefully investigated. The sandwich composites were characterized by compressive, tensile, and flexural properties. The results showed that compressive strength was highest at the “kenaf-glass” face-sheets, tensile strength was highest at “glass-glass” face-sheets, and flexural at “glass-glass” face-sheets with 52.1%, 67.6%, and 74.4% increase to “kenaf-kenaf” face-sheets, respectively. The tensile strength and modulus values with the specific strengths and modulus values showed that the mechanical properties of the sandwich composites can be influenced by hybridizing the face-sheet laminates of the composite. This shows that kenaf fiber has limited strength when used as reinforcement alone but gave an excellent performance when combined with glass fiber.
A solution casting approach is used to create hollow glass microsphere (HGM)-filled epoxy–syntactic foam composites (e–SFCs) by varying the concentrations of HGM in epoxy according to different particle sizes. Density analysis is used to investigate the impact of concentration and particle size regularity on the microstructure of e-SFCs. It was observed that e–SFCs filled with an HGM of uniform particle sizes exhibit a reduction in density with increasing HGM concentration, whereas e-SFCs filled with heterogeneous sizes of HGM exhibit closeness in density values regardless of HGM concentration. The variation in e–SFC density can be related to HGM packing efficiency within e–SFCs in terms of concentration and particle size regularity. The particle size with lowest true density of 0.5529 g/cm3, experimental density of 0.949 g/cm3 and tensile strength of 55.74 MPa resulted in e-SFCs with highest specific properties of 100.81 (MPa·g/cm3), with a 35.1% increase from the lowest value of 74.64 (MPa·g/cm3) at a true density of 0.7286 g/cm3, experimental density of 0.928 g/cm3 and tensile strength of 54.38 MPa. The e–SFCs’ theoretical density values were obtained. The variance in theoretical and experimental density values provides a thorough grasp of packing efficiency and inter-particle features.