Yuhang Zhang

Mr. Yuhang Zhang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2022 in Journal of Engineering and Applied Science
Verified
Journal Article
Open access
PDF file
CBChao Bao
Chao Bao
YZYuhang Zhang
Yuhang Zhang
DLDahai Lv
Dahai Lv
HWHuxiang Wang
Huxiang Wang
XMXiaotong Ma
Xiaotong Ma
KLKar Sing Lim
Kar Sing Lim
The progressive collapse of the structure caused by the partial failure of the structure will cause severe consequences and massive losses, and structural progressive collapse resistance has always been a hot topic of current research. In order to study the progressive collapse mechanism of base-isolated structures, the test study and numerical simulation of the base-isolated structures were carried out based on the vertical Pushover method and analysis of the variation rule of the capacity of the remaining structure and influence mechanism. The isolation bearing failure position, the size of the beam of the seismic isolation layer, the type of the isolation bearing, and the horizontal stiffness of the seismic isolation layer on the capacity of the remaining structure were compared and analyzed. The results show that the non-uniformity of the beams and the concentrated loading at the nodes were easy to form a linear catenary mechanism, resulting in more severe beam end damage than mid-span damage. In the case of side isolation bearing failure, due to the lack of sufficient lateral restraint, the capacity was significantly lower than other conditions, which were more likely to cause partly collapse. Therefore, setting more transfer paths to improve the structure’s resistance to progressive collapses was necessary. Increasing the size of the beam of the seismic isolation layer could improve the capacity of the remaining structure of the alternate load path in the base-isolated structure. The changes in the horizontal stiffness of the seismic isolation layer and the type of the isolation bearing have little effect on the progressive collapse resistance capacity of the remaining structure.

21 June 2023 in Modelling and Simulation in Engineering
Verified
Journal Article
Open access
PDF file
CBChao Bao
Chao Bao
DLDahai Lv
Dahai Lv
HWHuxiang Wang
Huxiang Wang
YZYuhang Zhang
Yuhang Zhang
XMXiaoTong Ma
XiaoTong Ma
JZJuping Zhang
Juping Zhang
Corrosion causes reduction in cross-sectional area of reinforcement, deterioration of mechanical properties, and degradation of bonding properties between reinforced concrete, which are the most important factors leading to the degradation of structural service performance. In order to investigate the progressive collapse mechanism of a corroded reinforced concrete frame structure, the failure modes, characteristics of the vertical displacement, and load capacity are studied using the finite element method. Based on existing experimental research, the established model is verified, and the influence of different influencing factors on the progressive collapse mechanism is analyzed. The results show that the corrosion of the reinforcement affects the yield load, peak load, and ultimate load of the reinforced concrete substructure. As the corrosion rate increases, the tensile arch action shows a particularly severe deterioration. The variation of concrete strength and the height–span ratio affects the substructure’s load-bearing capacity much more significantly than the stirrup spacing.