Ring resonators are an interesting alternative cavity solution to the commonly used ridge-type waveguide for terahertz (THz) quantum cascade lasers. They either support a standing-wave pattern showing spatial hole burning if there are defects implemented or a traveling mode in a defect-free cavity. Here, we report on ring-shaped THz quantum cascade lasers emitting between 3.2 and 4.1 THz operating in four different emission regimes. The presence of defects in the cavities force the THz quantum cascade laser into a standing-wave pattern. The measurements show a complex behavior highlighting the effect of strong confinement and the optical nonlinearities leading to the generation of a harmonic state, as well as to a fundamental comb, exhibiting over 30 equidistant modes and covering a bandwidth of 622 GHz. The results are explained by numerical calculations based on the Maxwell–Bloch formalism, including the linewidth enhancement factor and reflection points. The compact geometry and high output power (4 mW detected) make these devices extremely appealing for on-chip frequency comb applications in the terahertz region.
We demonstrate terahertz lasing emission from a quantum cascade structure, realized with InAs/AlAs0.16Sb0.84 heterostructures. Due to the lower effective electron mass, InAs based active regions are expected to provide a higher optical gain compared to structures consisting of GaAs or InGaAs. The growth by molecular beam epitaxy enabled the fabrication of monolayer-thick barriers, required for the active region, which is based on a 3-well resonant phonon depletion design. Devices were processed in a double-metal waveguide geometry to ensure high mode confinement and low optical losses. Lasing emission at 3.8 THz was observed at liquid helium temperatures by applying a magnetic field perpendicular to the layered structure in order to suppress parasitic scattering channels. These results demonstrate the feasibility of InAs based active regions for terahertz quantum cascade lasers, potentially enabling higher operating temperatures.
Terahertz quantum cascade lasers are excellent coherent light sources, however still limited to an operating temperature below 200 K. To tackle this, we analyze the influence of the barrier height for the identical three-well terahertz quantum cascade laser layer sequence by comparing different aluminum concentrations (x = 0.12 - 0.24) in the GaAs/AlxGa1-xAs material system and then we present an optimized structure based on these findings. Electron injection and extraction mechanisms as well as LO-phonon depopulation processes play a crucial role in the efficient operation of these lasers and are investigated in this study. Experimental results of the barrier height study show the highest operating temperature of 186.5 K for the structure with 21% aluminum barriers, with a record kBTmax/ℏω value of 1.36 for a three-well active region design. An optimized heterostructure with 21% aluminum concentration and reduced cavity waveguide losses is designed and enables a record operating temperature of 196 K for a 3.8 THz QCL.
We demonstrate the first lasing emission of a thermo-electrically cooled terahertz quantum cascade laser (THz QCL). A high temperature three-well THz QCL emitting at 3.8 THz is mounted to a novel five-stage thermoelectric cooler reaching a temperature difference of Delta T = 124 K. The temperature and time-dependent laser performance is investigated and shows a peak pulse power of 4.4 mW and a peak average output power of 100 mu W for steady-state operation. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License.
4 June 2018 in IEEE Transactions on Terahertz Science and Technology
We demonstrate contact-lithographically fabricated III-V field effect transistors examined over a bandwidth of 100 GHz to 11.8 THz. The zero-bias device reaches a noise equivalent power as low as 250 pW/$\sqrt{Hz}$ at 0.6 THz which then increases as f$^{4}$ at higher frequencies. The responsivity is modeled by a simple equivalent circuit, showing excellent agreement over the frequency range of 2 decades. The FETs have been characterized using a photomixer, a quantum cascade laser and a free electron laser, proofing the versatility and large applicability of the detection concept.