Michael Jaidl

Michael Jaidl

Auto-generated profile, based on publicly available information

Michael Jaidl

Photonics Institute TU Wien Gußhausstraße 27-29 1040 Vienna Austria

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2021 in Optica
Verified
Journal Article
Open access
MJMichael Jaidl
Michael Jaidl
NONikola Opacak
Nikola Opacak
MKMartin Alexander Kainz
Martin Alexander Kainz
SSS. Schönhuber
S. Schönhuber
DTDominik Theiner
Dominik Theiner
SSSebastian Schoenhuber
Sebastian Schoenhuber
Ring resonators are an interesting alternative cavity solution to the commonly used ridge-type waveguide for terahertz (THz) quantum cascade lasers. They either support a standing-wave pattern showing spatial hole burning if there are defects implemented or a traveling mode in a defect-free cavity. Here, we report on ring-shaped THz quantum cascade lasers emitting between 3.2 and 4.1 THz operating in four different emission regimes. The presence of defects in the cavities force the THz quantum cascade laser into a standing-wave pattern. The measurements show a complex behavior highlighting the effect of strong confinement and the optical nonlinearities leading to the generation of a harmonic state, as well as to a fundamental comb, exhibiting over 30 equidistant modes and covering a bandwidth of 622 GHz. The results are explained by numerical calculations based on the Maxwell–Bloch formalism, including the linewidth enhancement factor and reflection points. The compact geometry and high output power (4 mW detected) make these devices extremely appealing for on-chip frequency comb applications in the terahertz region.

21 December 2022 in ACS Photonics
Verified
Journal Article
Open access
MJMichael Jaidl
Michael Jaidl
MBMaximilian Beiser
Maximilian Beiser
MGMiriam Giparakis
Miriam Giparakis
MKMartin Alexander Kainz
Martin Alexander Kainz
DTDominik Theiner
Dominik Theiner
KUKarl Unterrainer
Karl Unterrainer
Broadband emission in the terahertz spectral region is a prerequisite for applications such as spectroscopy or white light sources. Appropriate signal powers and a compact design are advantageous for this use. A technology which meets these requirements are terahertz quantum cascade lasers. These electrically pumped, on-chip semiconductor lasers provide high output powers and the freedom of tailoring their emission wavelength by bandstructure engineering. By combining multiple active region designs emitting at different wavelengths in a single structure, one can obtain broadband emission from a single device. Here, we present a heterogeneous terahertz quantum cascade laser consisting of five individual active regions based on a three-well, LO-phonon depopulation design. The devices lase in pulsed and continuous-wave operation and emit in a spectral range from 1.9 to 4.5 THz, covering a bandwidth of 1.37 octaves. The use of the three-well design, which was optimized for high temperature operation, leads to a maximum operating temperature in the pulsed operation of 143 K.

28 February 2022 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
MJM. Jaidl
M. Jaidl
NON. Opačak
N. Opačak
MKMartin Alexander Kainz
Martin Alexander Kainz
DTD. Theiner
D. Theiner
BLB. Limbacher
B. Limbacher
KUK. Unterrainer
K. Unterrainer
We demonstrate terahertz quantum cascade lasers realized in “ideal” ring resonators without discontinuities from, e.g., contacting pads. We realize this by mounting rings episide-down on a silicon substrate by a die-bonding technique. This technique allows one to realize ideal conditions for optical confinement as well as heat dissipation and provides the basis for future Si integrated THz devices. The lasers emit light around 3.8 THz and show much reduced threshold current densities. When operated in continuous-wave operation, frequency comb formation with a spectral bandwidth of 70 GHz is observed. Frequency comb operation is indicated by a narrow beat note signal at 8.55 GHz with a signal-to-noise ratio up to 40 dB. The experimentally measured spectral behavior of ring devices is described accurately by the results obtained from numerical simulations based on the Maxwell–Bloch formalism.

15 November 2021 in Optics Letters
Verified
Journal Article
Open access
DTDominik Theiner
Dominik Theiner
BLBenedikt Limbacher
Benedikt Limbacher
MJMichael Jaidl
Michael Jaidl
KUKarl Unterrainer
Karl Unterrainer
JDJuraj Darmo
Juraj Darmo
We demonstrate a terahertz (THz) frequency comb that is flexible in terms of its frequency range and the number and spacing of comb lines. We use a combination of near-infrared laser diodes, phase modulation, and opto-electronic frequency conversion. The THz comb lines are characterized to be < 10 M H z by resolving the pressure-dependent collisional broadening of an ammonia molecule rotational mode.

6 November 2020 in Physical Review Applied
Verified
Journal Article
Closed access
PDF file
MKMartin Alexander Kainz
Martin Alexander Kainz
MWMoritz Wenclawiak
Moritz Wenclawiak
SSSebastian Schönhuber
Sebastian Schönhuber
MJMichael Jaidl
Michael Jaidl
BLBenedikt Limbacher
Benedikt Limbacher
KUKarl Unterrainer
Karl Unterrainer
The interplay of high operating temperatures and good heat dissipation is crucial for high-performance terahertz quantum cascade lasers. We therefore study the influence on the cross-plane thermal conductivity of different aluminum concentrations in the barrier of GaAs/AlxGa1−xAs active regions. The thermal conductivity is decreasing from 30WK−1m−1 to 12WK−1m−1 if the aluminum concentration is increased from 15% to 24%. The temperature during pulsed-laser operation is obtained by measuring the variation of the emission frequency for different laser pulse lengths. This shows, that besides the thermal conductivity, the amount of electric input power has a strong influence on the temperature reached internally during laser operation and is critical for creating high-power devices operating at high temperatures. We show that active regions with thin but high AlxGa1−xAs barriers fulfill this need and are well suited for high-temperature operation. A thermal model of the devices allows prediction of the active-region temperature increase for very short pulse durations. For the structure with 24% Al barriers and a starting temperature of 10 K, the model shows an increase by 24 K for a pulse length of only 300 ns.

27 April 2023 in Optics Express
Verified
Journal Article
Open access
DTDominik Theiner
Dominik Theiner
BLBenedikt Limbacher
Benedikt Limbacher
MJMichael Jaidl
Michael Jaidl
MEMarie Ertl
Marie Ertl
MHMichael Hlavatsch
Michael Hlavatsch
JDJuraj Darmo
Juraj Darmo
We report on a flexible platform for molecular sensing in the terahertz range. Merging the well-established technologies of near-infrared electro-optic modulation and photomixing realizes a spectrally adaptable terahertz source, which is combined with a new generation of compact gas cells, so-called substrate-integrated hollow waveguides (iHWGs). iHWGs have been developed in the mid-infrared and provide flexibility in the design of the optical absorption path. Here, we demonstrate its suitability for the terahertz domain by presenting its low propagation losses and by measuring rotational transitions of nitrious oxide (N2O). A fast frequency sideband modulation technique results in substantially reduced measurement times and increased accuracy compared to a standard wavelength tuning method.