28 February 2022 in Applied Physics Letters
We demonstrate terahertz quantum cascade lasers realized in “ideal” ring resonators without discontinuities from, e.g., contacting pads. We realize this by mounting rings episide-down on a silicon substrate by a die-bonding technique. This technique allows one to realize ideal conditions for optical confinement as well as heat dissipation and provides the basis for future Si integrated THz devices. The lasers emit light around 3.8 THz and show much reduced threshold current densities. When operated in continuous-wave operation, frequency comb formation with a spectral bandwidth of 70 GHz is observed. Frequency comb operation is indicated by a narrow beat note signal at 8.55 GHz with a signal-to-noise ratio up to 40 dB. The experimentally measured spectral behavior of ring devices is described accurately by the results obtained from numerical simulations based on the Maxwell–Bloch formalism.
15 November 2021 in Optics Letters
We demonstrate a terahertz (THz) frequency comb that is flexible in terms of its frequency range and the number and spacing of comb lines. We use a combination of near-infrared laser diodes, phase modulation, and opto-electronic frequency conversion. The THz comb lines are characterized to be by resolving the pressure-dependent collisional broadening of an ammonia molecule rotational mode.
27 April 2023 in Optics Express
We report on a flexible platform for molecular sensing in the terahertz range. Merging the well-established technologies of near-infrared electro-optic modulation and photomixing realizes a spectrally adaptable terahertz source, which is combined with a new generation of compact gas cells, so-called substrate-integrated hollow waveguides (iHWGs). iHWGs have been developed in the mid-infrared and provide flexibility in the design of the optical absorption path. Here, we demonstrate its suitability for the terahertz domain by presenting its low propagation losses and by measuring rotational transitions of nitrious oxide (N2O). A fast frequency sideband modulation technique results in substantially reduced measurement times and increased accuracy compared to a standard wavelength tuning method.
10 October 2025 in Optics Express
We demonstrate a versatile and compact approach to generate and control terahertz frequency combs by applying radio frequency modulation to a ring-shaped quantum cascade laser. By harmonically driving the device well above threshold, we induce the formation of phase-coherent sidebands with tunable spacing across a broad radio frequency range (1.5–14.5 GHz), independent of the laser’s cavity modes. The RF generated comb exhibits narrow beat notes with linewidths down to 3.5 Hz and a linear phase profile, as verified by optical beat note analysis, indicating the important role of the phase modulation. Unlike classical phase modulation, we observe a simultaneous increase in total terahertz output power and driving current, reflecting an enhanced laser efficiency and photon-assisted transport. The presented approach enables flexible manipulation of frequency grids and spectral power distribution in both single-mode and multimode regimes, including subharmonic injection locking for spectral broadening. Our results highlight the potential of radio frequency-modulated quantum cascade lasers as customizable, high-efficiency terahertz comb sources for spectroscopy, sensing, and communication applications.
16 September 2024 in Applied Physics Letters
We present mutual optical coupling in terahertz (THz) quantum cascade wire laser arrays that are flip-chip bonded to a dielectric substrate. The mounting substrate is patterned for individual electrical contacting of each wire laser of the array. The resulting sandwich-like structure supports wire laser modes with a significant part propagating outside the cavity and mediates the long range coupling. The evanescent field part of the modes couples to the adjoining ridge, which, in turn, leads to mutual optical injection-locking between them. We demonstrate this effect for both geometrically similar and dissimilar wire lasers when biased in pulsed operation with temporally overlapping bias pulses. Finite element simulations confirm our measurement results. By applying time-shifted bias pulses to individual array elements, a controllable optical injection seeding of the wire cavity is achieved. We observe intensity modification of the laser modes with changing bias pulse overlap as a result of the injection locking. By choosing both the physical spacing of the laser ridges and the intensity of the seeding laser correctly, the relative intensities of the favored lasing modes are enhanced up to 95 percent. Understanding the coupling in THz wire laser arrays is important for future device improvements in terms of higher continuous-wave operating temperatures through better thermal dissipation, and higher output power and an improved far field due to controlled coupling of their modes.