The spectral response properties of AlGaN Schottky barrier detectors with different Al content were investigated. It was found that the responsivity of AlGaN detectors decreases with increase in Al content in AlGaN. It was found that neither dislocation density nor the concentration of carbon and oxygen impurities made any remarkable difference in these AlGaN devices. However, the positron annihilation experiments showed that the concentration of Al or Ga vacancy defects (more likely Ga vacancy defects) in AlGaN active layers increased with the increase in Al content. It is assumed that the Al or Ga vacancy defects play a negative role in a detector’s performance, which increases the recombination of photogenerated carriers and reduces the detector responsivity. It is necessary to control the concentration of vacancy defects for the high performance AlGaN detectors.
We have studied the aging-induced degradation effect and the related mechanism of blue and ultraviolet (UV) laser diodes (LDs). First of all, the F parameter value, leakage current, and yellow luminescence intensity of LDs all increase after 24 h of the aging process, indicating that one of the reasons for the degradation of UV LDs may be the increase of the non-radiative recombination center in the material. Second, irreversible damage may be found on the front cavity surface of the UV and blue LDs. Due to the large UV photon energy, water molecules in the environment atmosphere are ionized to form OH− ions, which combine with dust in air to form SiO2 sediments and then attach to the front cavity surface. In addition, a large photon energy may cause damage to the anti-reflection film on the front cavity surface and lead to a too-high local temperature near the cavity surface, resulting in molten Ga droplets. Both sediment and the precipitation of molten GaN on the cavity surface will directly affect the function of the front cavity surface and the output power of the LD. In order to improve the reliability of the GaN-based UV LDs, it is necessary to reduce the density of material defects, select more stable coating materials on cavity facets, and improve the sealing property of the device package.
The failure mechanism of 385 nm GaN-based ultraviolet (UV) laser diodes (LDs) has been investigated. The degradation factors were studied by analyzing scanning electron microscopy (SEM), cathodoluminescence, and transmission electron microscopy (TEM) after aging. In degraded UV LD, degradation is easily observed on the anterior cavity facet, with holes found in the epitaxial GaN material, primarily concentrated in the quantum wells and waveguide regions of the LDs. This shows that the degradation may be closely related to the higher photon energy of the UV laser beam emitted by UV LDs. In the aging process of samples, emission of UV lasers leads to deterioration at the interface and in the semiconductor. This degradation leads to continuous heat accumulation and may create a positive feedback loop. Ultimately, this results in the failure of the UV LD. This study presents a possible major factor for the shorter lifetime of UV LD compared to blue LD. Therefore, it is very significant to improve the interface quality for extending the lifetime of UV LDs.
Temperature characteristics of GaN-based laser diodes are investigated. It is noted that the characteristic temperature of the threshold current (T0) decreases with decreasing lasing wavelength for GaN-based LDs. The performance deteriorates seriously for UV LDs at high temperature. It is ascribed to the increase of carriers escaping from quantum wells due to the lower potential barrier height. In this Letter, AlGaN is used as the barrier layer in UV LDs instead of GaN to improve the temperature characteristic of the threshold current and slope efficiency by increasing the potential barrier height of quantum wells. Based on this structure, a high output power of 4.6 W is obtained at the injection current of 3.8 A; its lasing wavelength is 386.8 nm.
Three AlGaN-based Schottky detector samples grown with varying pressure conditions are prepared and their responsivity is investigated. It is found that the responsivity of the three samples first increases and then decreases with the increase of pressure. In addition, the vacancy defect concentration increases and carbon impurities concentration decreases when the reactor pressure increases from 100 mbar to 200 mbar during the i-AlGaN layer growth. It is assumed that carbon impurities and vacancy defects play a negative role in detector’s performance, which increase the recombination of photogenerated carriers and reduce detector responsivity. The relationship between growth pressure and detector responsivity is not linear. It is necessary to select a suitable growth pressure to improve the performance of AlGaN detectors.
The dark leakage current of AlxGa1-xN Schottky barrier detectors with different Al contents is investigated. It was found that the dark leakage of AlxGa1-xN detectors increased with increasing Al content. The XRD and SIMS results showed that there was no significant difference of the dislocation density and carbon impurity concentration in five AlxGa1-xN samples with different Al content. This was likely not the main reason for the difference in dark leakage current of AlxGa1-xN detectors. However, the results of positron annihilation showed that the vacancy defect concentration increased with increasing Al content. This was consistent with the result that the dark leakage current increased with increasing Al content. With the increase of vacancy concentration, the vacancy defect energy levels also increased, and the probability of electron tunneling through defect levels increased. In contrast, the Schottky barrier height decreased, which eventually led to the increase of dark leakage current. This discovery should be beneficial to an accurate control of the performance of AlxGa1-xN detectors.