Fuan Cheng

Prof. Fuan Cheng

Xi`an University of Technology, Xi’an, Shaanxi, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 February 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
NHNing He
Ning He
YLYuxiang Li
Yuxiang Li
HLHuiping Li
Huiping Li
DHDangtong He
Dangtong He
FCFuan Cheng
Fuan Cheng
Model predictive control (MPC), which obtains the control signal via solving an optimal control problem online, has been widely applied in various cyber-physical systems (CPSs) due to its ability to handle the physical constraints on system variables explicitly. To further reduce the communication and computational resource consumption while ensuring the control performance, a novel event-triggered MPC (ET-MPC) framework is proposed for perturbed nonlinear CPSs with input and state constraints. Specifically, rather than utilizing the instantaneous state error to determine the next triggering instant, which may result in residual error and state mutation for the considered system, the developed strategy adopts the proportion, integral, and differential (PID) of the state error within a time horizon simultaneously to ensure the performance of the CPS under the event-based sampling framework. Moreover, the PID-based ET-MPC algorithm is developed, and the theoretical properties, including feasibility and stability, are strictly proved. Finally, the resource saving property, as well as the control performance of the proposed ET-MPC strategy are extensively verified via MATLAB simulation and a real robot platform powered by the robot operating system, respectively.

1 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
FCFuan Cheng
Fuan Cheng
YHYaru Hu
Yaru Hu
Qiang SongQiang Song
Qiang Song
JNjiao nie
jiao nie
JSJiahao Su
Jiahao Su
YCYanxin Chen
Yanxin Chen
The hydration of M-S-H prepared using silica fume (SF) and dead-burned MgO cured at 20 °C, 50 °C, and 80 °C was investigated, and the properties and performance of this M-S-H were measured. The formation of M-S-H was characterized using XRD, FTIR, TGA, and 29Si MAS-NMR. Results show that the compressive strength of paste prepared using MgO calcined at 1450 °C for 2 h reached 25 MPa after 28 d. The shrinkage of mortar made with low reactivity MgO was lower than that made with high reactivity MgO. The pH value of MgO/SF paste mixed with dead-burned MgO did not exceed 10.4 at room temperature. The shrinkage of M-S-H prepared using dead-burned MgO was less than that prepared using more active MgO, and its strength did not decrease over time. No (or only a small amount of) Mg(OH)2 was formed, which is why the strength of M-S-H prepared with dead-burned MgO continually increased, without decreasing. The promotion of curing temperature favor process of MgO hydration and is beneficial for degree of silica polymerization. The sample cured in 50 °C water showed the highest relative degree of reaction.

8 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
SJShaowu Jiu
Shaowu Jiu
BZBo Zhao
Bo Zhao
CYChao Yang Yang
Chao Yang Yang
YCYanxin Chen
Yanxin Chen
FCFuan Cheng
Fuan Cheng
Upgrading and utilizing low-grade iron ore is of great practical importance to improve the strategic security of the iron ore resource supply. In this study, a thermal analysis–infrared (IR) analysis–in-situ IR method was used to investigate the reaction mechanism and kinetics of Daxigou siderite. Experiments were conducted using a conveyor bed magnetization roasting process (CBMRP) to investigate the magnetization of siderite. Multi-stage magnetic separation processes were adopted to extract magnetite. The results show that simultaneously the iron carbonate in siderite decomposes, and magnetite is formed between 364 °C and 590 °C under both inert and reducing atmospheres. The activation energy of the magnetization roasting reaction is 106.1 kJ/mol, consistent with a random nucleation and growth reaction mechanism. Magnetization roasting at 750–780 °C for approximately 3.5 s in the CBMRP results in a magnetic conversion rate of >0.99 of the iron minerals in the siderite. A beneficiation process of one roughing, one sweeping, and three cleaning processes was adopted. A dissociation particle size of −400 mesh accounting for 94.78%, a concentrate iron grade of 62.8 wt.%, and a recovery of 68.83% can be obtained. Overall, a theoretical and experimental basis is presented for the comprehensive utilization of low-grade siderite.

1 January 2024 in Journal of King Saud University Computer and Information Sciences
Verified
Journal Article
Open access
NHNing He
Ning He
JDJiawei Du
Jiawei Du
FCFuan Cheng
Fuan Cheng
ZXZhongxian Xu
Zhongxian Xu

23 April 2024 in Buildings
Verified
Journal Article
Open access
PDF file
QSQiang Song
Qiang Song
QHQian He
Qian He
JNJiao Nie
Jiao Nie
TSTiantian Song
Tiantian Song
HZHong Zhou
Hong Zhou
FCFuan Cheng
Fuan Cheng
In order to explore a wider range and lower cost of raw materials for the preparation of magnesium silicate hydrate (M-S-H), an acid-leaching method was employed to extract and separate high-purity magnesium hydroxide (Mg(OH)2) with a purity higher than 97% and amorphous silica with a purity higher than 90% from four types of natural silicate minerals (serpentine, peridotite, zeolite, and montmorillonite). These two intermediate products, which are amorphous silica and magnesium hydroxide, were used to prepare M-S-H, and the influence of curing at two temperatures, 50 °C and 80 °C, on the properties of M-S-H was investigated. The results showed that with the increase in curing temperature, the bound water content, tetrahedral polymerization degree, and Mg(OH)2 content increased. There was a good correlation between the increase in strength and the bound water content of M-S-H. This work provides a possible technological route for expanding the raw materials for preparing magnesium silicate hydrate cementitious materials and utilizing the abundant magnesium silicate minerals in the Earth’s crust.

3 October 2025 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
NHNing He
Ning He
XFXiaofei Feng
Xiaofei Feng
ZXZhongxian Xu
Zhongxian Xu
DTDongyuan Tian
Dongyuan Tian
FCFuan Cheng
Fuan Cheng
HLHuiping Li
Huiping Li
This paper aims to propose a new event-triggered distributed model predictive control framework based on an adaptive dual-horizon (prediction and control horizon) mechanism for multi-agent cyber-physical systems (CPS) with additive disturbances. Firstly, the control horizon is introduced into the constrained optimal control problem (OCP) of multi-agent CPS to reduce the number of independent variables and improve the rapidity of the algorithm. Secondly, a periodic event-triggered mechanism with Zeno-free behavior is designed based on state error information, which can more efficiently reduce the frequency of solving OCP. Then, adaptive prediction horizon and control horizon contraction mechanisms are designed, effectively reducing the computational complexity of solving OCP for the controller at the triggering moment. In addition, sufficient conditions are provided through theoretical analysis to guarantee the recursive feasibility of algorithm and the stability of the closed-loop system. Finally, the effectiveness of the proposed algorithm is verified through simulation and experimentation example of networked multi-robot system, and the results showed that the algorithm can effectively reduce communication resource consumption and computational complexity in solving OCP while ensuring the expected cooperative control effect. Note to Practitioners—The feature of this paper is to propose a new distributed model predictive control method for control engineers of CPS, such as aircraft formation, vehicle formation, and multi-robot systems. The aim is to effectively reduce the online computational complexity and the impact of high communication rates on control performance. Specifically, we achieved rapid solution of OCP and efficient utilization of communication resources through time-varying prediction and control horizons, and lowering the sampling and communication frequency through event-triggered mechanisms. It should be emphasized that the proposed mechanisms may require the multicore computation unit to implement, as the computation of the OCP and the verification of the event triggered condition need to be performed simultaneously. To facilitate the application of the method, practical experiments on multi-robot systems have also been conducted, providing practical implementation guidelines.