Interference multipath is an important factor to affect the anti-jamming performance for the global navigation satellite system (GNSS) antenna array receiver. However, interference multipath must be considered in practical application. In this paper, the antenna array model for interference multipath is analyzed, and an equivalent model for interference multipath is proposed. According to the equivalent interference multipath model, the influence of interference multipath on anti-jamming performance is analyzed from the space only processing (SOP) and space-time adaptive processing (STAP). Interference multipath can cause loss of the degree of freedom (DoF) of SOP. Through analysis of the equivalent model and STAP mechanism, it further reveals how the STAP can solve the interference multipath. The simulation experiments prove that the equivalent model is effective, and the analysis conclusion is correct. This paper also points out that the interference bandwidth is wider and more taps in STAP are required, under the same experiment conditions.
With the increasing economic and strategic significance of the global navigation satellite systems (GNSS), interference events also occur frequently. Interference monitoring technologies aim to monitor the interference that may affect the regular operation of the GNSS. Interference monitoring technologies can be divided into three parts: interference detection and recognition, interference source direction finding, and interference source location and tracking. Interference detection aims to determine whether interference exists. This paper introduces the classification of interference and the corresponding detection methods. The purpose of interference recognition is to recognize and classify interference. It is often combined with pattern recognition and machine learning algorithms. Interference source direction finding aims to estimate the direction of the interference signal. There are three kinds of methods: amplitude, phase, and spatial spectrum estimation. Interference source location aims to estimate the position of the interference signal. It is usually based on the received signal strength (RSS), time difference of arrival (TDOA), frequency difference of arrival (FDOA), angle of arrival (AOA) or direction of arrival (DOA). Interference source tracking aims to track moving interference sources, and it is generally based on Kalman filter theory. This paper summarizes the interference monitoring technologies and their latest progress. Finally, prospects for interference monitoring technologies are offered.
Adaptive filtering algorithms can be used on the time-domain processing of navigation receivers to suppress interference and maintain the navigation and positioning function. The filter length can affect the interference suppression performance and hardware utilization simultaneously. In practical engineering, the filter length is usually set to a large number to guarantee anti-jamming performance, which means a high-performance receiver requires a high-complexity anti-jamming filter. The study aims at solving the problem by presenting a design method for the optimal filter order in the time-domain anti-jamming receiver, with no need for detailed interference information. According to interference bandwidth and jam-to-signal ratio (JSR), the approach designed a band-stop filter by Kaiser window for calculating the optimal filter order to meet interference suppression requirements. The experimental results show that the time-domain filtering processing has achieved good interference suppression performance for engineering requirements with optimal filter order in satellite navigation receivers.
Frequency-domain anti-jamming technology is a common anti-jamming method for satellite navigation receivers. 1/2 overlapping windowing can effectively solve the spectrum leakage in the frequency domain conversion process, but the traditional window function will cause the loss of signal energy. This paper proposes a window function design method with no loss of signal energy, which can effectively solve the signal energy loss caused by the window function. The feasibility of the proposed method is theoretically deduced, and the effectiveness of the proposed method is verified by simulation and measured data. Compared with the traditional window function, the signal-to-noise ratio improvement of the method proposed in this paper is better than 0.5 dB. The frequency domain anti-jamming processing is optimized, the signal-to-noise ratio loss caused by the anti-jamming processing is reduced, and the anti-jamming performance is indirectly improved. This plays an important role in the performance optimization of satellite navigation system links.
The global navigation satellite system has achieved great success in the civil and military fields and is an important resource for space-time information services. However, spoof interference has always been one of the main threats to the application security of satellite navigation receivers. In order to further improve the application security of satellite navigation receivers, this paper focuses on the application scenarios where narrowband and spoofing interference exist at the same time, studies the problem of spoofing interference detection under mixed interference conditions, then proposes a spoofing interference detection method based on the tracking loop identification curve. This method can effectively deal with the detection of spoofing interference under the conditions of narrowband interference and, at the same time, it can effectively detect the spoofing interference of gradual deviation. Simulation experiments verify the effectiveness of the spoofing interference detection method, based on the tracking loop discrimination curve. In typical jamming and spoofing scenarios, when the spoofing signal is about 7.5 m away from the real signal, the method used in this paper can achieve effective detection. The proposed detection method is of great significance for improving the anti-spoofing capability of satellite navigation receivers.
The global satellite navigation system represented by global position systems (GPS) has been widely used in civil and military fields, and has become an important cornerstone of space-time information services. However, the frequency band of satellite navigation signals is open, and the frequency points overlap with some radars and communication systems, which brings challenges to the application of satellite navigation. Time-domain adaptive filtering technology is a typical anti-jamming method which can suppress the narrow-band interference faced by satellite navigation. However, in the process of suppressing narrow-band interference, the navigation signal will be distorted, which is mainly reflected in the distortion of the spectrum of the navigation signal, which will lead to the enhancement of the side lobes in the correlation function. In this paper, we focus on time-domain adaptive anti-jamming, study the mechanism of correlation function sidelobes lift caused by narrow-band interference suppression, and propose a correlation function sidelobes suppression method based on time-domain adaptive anti-jamming, which can be realized without losing anti-jamming performance. The simulation experiment verifies the validity of the mechanism analysis of the sidelobes lift of the correlation function and the effectiveness of the proposed method. The analysis results and the proposed method are of great significance, which is reflected in the improvement of the anti-jamming performance and acquisition performance of satellite navigation receivers.