This paper presents a multi-band ultra-low power (ULP) receiver with N-Path Switched-Capacitor (NPSC) networks in 90 nm CMOS process. The NPSC is integrated into the feedback loop of the low noise amplifier (LNA) to flexibly provide narrowband input matching at multiple sub-GHz Industrial, Scientific, and Medical (ISM) bands by adjusting the switching frequency. Moreover, the LNA with an NPSC network is utilized to suppress the out-of-band signal at the input and output of the LNA, simultaneously. In order to achieve an ultra-low power consumption, a sub-threshold LNA and four passive NPSC mixers are implemented in this receiver. The ULP receiver achieves a measured gain of dB in ISM bands (430/860/915/960 MHz). The measured noise figure and out-of-band IIP3 are dB and dBm, respectively. The ULP receiver chip consumes 320 W at 0.4 V power supply and occupies a chip area of 0.31 mm.
This paper presents a multi-band low-noise amplifier (LNA) in the 45-nm CMOS silicon-on-insulator (SOI) process. The LNA consists of three stages, with the differential cascode amplifier as the core structure. The first stage is mainly responsible for input matching to ensure favourable noise characteristics and bandwidth, while the subsequent stages increase the gain. Moreover, the LNA utilizes baluns for input/output and interstage impedance matching. Switch capacitances are added to switch the three operating bands of the LNA, which cover 17–38 GHz overall. Measurement results show that the proposed LNA achieves a gain (S21) of 23.0 dB and a noise figure (NF) of 4.0 dB.
This manuscript presents an analysis and optimization scheme for the ultra-wideband passive reconfigurable polyphase filters (PPFs) to minimize I/Q (in-phase and quadrature-phase) phase/amplitude mismatch and voltage loss. By building a mathematical model of the voltage transfer, the relationship between the resonant frequency of each stage and the I/Q mismatch and the relationship between the network impedance and the voltage loss are revealed, providing a scheme for PPF optimization. The proof-of-concept 2~8 GHz wideband reconfigurable PPF is designed in a 55 nm CMOS process. The optimization scheme enables the designed PPF to achieve an I/Q phase mismatch within 0.2439° and an I/Q amplitude mismatch within 0.098 dB throughout the entire band, and it shows great robustness during Monte Carlo sampling. The maximum voltage loss is 17.7 dB, and the total chip area is 0.174 × 0.145 mm2.