Chemical recycling of plastics holds great promise but remains constrained by sustainability issues, with polyethylene terephthalate (PET) epitomizing this challenge. Herein, we introduce a conceptually novel strategy that overcomes PET's intrinsic hydrophobicity by physically re‐engineering the polymer's microstructure to enable ultrafast alkaline hydrolysis under exceptionally mild conditions. We leverage the ability of propylene carbonate (PC)—an inexpensive, commercial, green solvent—to selectively dissolve PET, to thermally induce phase separation, and subsequently act as a carrier for water insertion between polymer chains. Upon complete PC replacement, the water uptake exceeds twice the polymer mass, preventing chain re‐compaction and establishing an interfacial environment that facilitates hydroxyl ion diffusion to ester bonds and depolymerization with minimal alkali consumption. As a result, water‐swollen PET fully depolymerizes (96% TPA yield) at atmospheric pressure within 5 min at 90 or under 2 h at room temperature, vastly outperforming conventional hydrolysis methods. The process achieves a 20‐fold reduction in energy footprint versus direct PET hydrolysis. It performs robustly on challenging, real‐world feedstocks—including textiles and mixed plastic waste—enabling selective depolymerization unaffected by PET crystallinity. A techno‐economic analysis (TEA) confirms energy efficiency and strong economic feasibility, demonstrating overall competitiveness with existing engineered technologies. Beyond PET, the physical mechanism underpinning the strategy offers a scalable and sustainable platform for recycling a wide range of condensation polymers.
Chemical recycling of plastics holds great promise but remains constrained by sustainability issues, with polyethylene terephthalate (PET) epitomizing this challenge. Herein, we introduce a conceptually novel strategy that overcomes PET's intrinsic hydrophobicity by physically re‐engineering the polymer's microstructure to enable ultrafast alkaline hydrolysis under exceptionally mild conditions. We leverage the ability of propylene carbonate (PC)—an inexpensive, commercial, green solvent—to selectively dissolve PET, to thermally induce phase separation, and subsequently act as a carrier for water insertion between polymer chains. Upon complete PC replacement, the water uptake exceeds twice the polymer mass, preventing chain re‐compaction and establishing an interfacial environment that facilitates hydroxyl ion diffusion to ester bonds and depolymerization with minimal alkali consumption. As a result, water‐swollen PET fully depolymerizes (96% TPA yield) at atmospheric pressure within 5 min at 90 or under 2 h at room temperature, vastly outperforming conventional hydrolysis methods. The process achieves a 20‐fold reduction in energy footprint versus direct PET hydrolysis. It performs robustly on challenging, real‐world feedstocks—including textiles and mixed plastic waste—enabling selective depolymerization unaffected by PET crystallinity. A techno‐economic analysis (TEA) confirms energy efficiency and strong economic feasibility, demonstrating overall competitiveness with existing engineered technologies. Beyond PET, the physical mechanism underpinning the strategy offers a scalable and sustainable platform for recycling a wide range of condensation polymers.
The long-known role of cell migration in physiological and pathological contexts still requires extensive research to be fully understood, mainly because of the intricate interaction between moving cells and their surroundings. While conventional assays fail to capture this complexity, recently developed 3D platforms better reproduce the cellular micro-environment, although often requiring expensive and time-consuming imaging approaches. To overcome these limitations, we developed a novel approach based on 2D micro-patterned substrates, compatible with conventional microscopy analysis and engineered to create micro-gaps with a length of 150 µm and a lateral size increasing from 2 to 8 µm, where a curved water–air interface is created on which cells can adhere, grow, and migrate. The resulting hydrophilic/hydrophobic interfaces, variable surface curvatures, spatial confinements, and size values mimic the complex micro-environment typical of the extracellular matrix in which aggressive cancer cells proliferate and migrate. The new approach was tested with two breast cancer cell lines with different invasive properties. We observed that invasive cells (MDA-MB-231) can align along the pattern and modify both their morphology and their migration rate according to the size of the water meniscus, while non-invasive cells (MCF-7) are only slightly respondent to the surrounding micro-environment. Moreover, the selected pattern highlighted a significative matrix deposition process connected to cell migration. Although requiring further optimizations, this approach represents a promising tool to investigate cell migration in complex environments.
30 November 2022 in Materials Science and Engineering: C
Many years ago, asbestos fibers were banned and replaced by synthetic vitreous fibers because of their carcinogenicity. However, the toxicity of the latter fibers is still under debate, especially when it concerns the early fiber interactions with biological cell membranes. Here, we aimed to investigate the effects of a synthetic vitreous fiber named FAV173 on the Xenopus laevis oocyte membrane, the cell model we have already used to characterize the effect of crocidolite asbestos fiber exposure. Using an electrophysiological approach, we found that, similarly to crocidolite asbestos, FAV173 was able to stimulate a chloride outward current evoked by step membrane depolarizations, that was blocked by the potent and specific TMEM16A channel antagonist Ani9. Exposure to FAV173 fibers also altered the oocyte cell membrane microvilli morphology similarly to crocidolite fibers, most likely as a consequence of the TMEM16A protein interaction with actin. However, FAV173 only partially mimicked the crocidolite fibers effects, even at higher fiber suspension concentrations. As expected, the crocidolite fibers’ effect was more similar to that induced by the co-treatment with (Fe3+ + H2O2), since the iron content of asbestos fibers is known to trigger reactive oxygen species (ROS) production. Taken together, our findings suggest that FAV173 may be less harmful that crocidolite but not ineffective in altering cell membrane properties.