Fatima Khitab

Dr. Fatima Khitab


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 September 2022 in Water
Verified
Journal Article
Open access
PDF file
SGSalma Gul
Salma Gul
MKMansha Kanwal
Mansha Kanwal
RQRaina Aman Qazi
Raina Aman Qazi
HGHajera Gul
Hajera Gul
RKRozina Khattak
Rozina Khattak
Andrey E. KrauklisAndrey E. Krauklis
Andrey E. Krauklis
Methyl red (MR) dye, one of the azo dyes, is mutagenic and its persistence has negative effects on the environment and people’s health. The current work is the first to demonstrate that methyl red dye can be removed effectively and sustainably, utilizing biomass derived from the bark of the Dodonaea viscosa (Hopbush) plant. The Hopbush bark shows effective adsorption of MR, upto 73%, under optimized conditions in an aqueous medium. The experimental conditions were optimized by examining the effect of time, initial dye concentration, pH and ionic strength on the adsorption process in an aqueous medium. Maximum (i.e., 73%) adsorption of MR removal (500 ppm) was observed in highly acidic conditions (pH = 1) at a contact time of 75 min. The pseudo-second-order kinetic model and Freundlich adsorption isotherm appeared to be the most appropriate for characterizing the MR’s adsorption onto the bark of the D. viscosa plant. Furthermore, it was shown that bark powder outperformed animal charcoal, silica gel, and powdered flowers, as well as the leaves of the same species, in terms of adsorption capacity. Thus, a natural adsorbent that is inexpensive and readily available—the bark of the D. viscosa plant—can be used to effectively remove harmful dyes from contaminated water and protect water resources from harmful pollutants.

28 February 2023 in Separations
Verified
Journal Article
Open access
PDF file
SGSalma Gul
Salma Gul
SGShehla Gul
Shehla Gul
HGHajera Gul
Hajera Gul
FKFatima Khitab
Fatima Khitab
RKRozina Khattak
Rozina Khattak
Ivar ZekkerIvar Zekker
Ivar Zekker
The dyeing industry uses many chemicals and dyes. After the dying process is completed, they release a significant amount of dyes in wastewater. The dyes’ color emissions are extremely poisonous and dangerous for aquatic and terrestrial life. Due to the toxic nature of dyes, the current study was carried out to evaluate whether it would be effective to employ an adsorption procedure with leaves from the Adiantum capillus-veneris plant as an adsorbent to remove commonly used textile dyes from an aqueous dye solution and wastewater. The effect of pH, concentration, time and the adsorbent dose on the adsorption process was studied in order to determine the maximum adsorption under ideal conditions. The selected pH was 3; the optimum concentration was 30 ppm with a contact time of 90 min and the optimized adsorbent dose was 60 mg. The absorbent under study showed excellent results when compared with commercial adsorbents i.e., animal charcoal and silica gel. The leaves of the Adiantum capillus-veneris plant revealed a maximum removal of 90.36 percent crystal violet dye (adsorption capacity (Qe) 9.05 mg/g) without any treatment to activate or alter the surface chemistry of the biosorbent. Its effectiveness was also tested with water gathered from several sources, including canal water, tap water, distilled water, and saline water, to determine whether it was practical. In both the canal and the tap water, the adsorbent displayed good removal efficiency. From the results of the current study, it can be inferred that the leaves of the Adiantum capillus-veneris plant are a reasonably priced biosorbent that can be used to remove toxic dyes from wastewater to protect water bodies from toxic pollution and can be used to treat industrial wastewater directly.

30 June 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
RURabid Ullah
Rabid Ullah
FKFatima Khitab
Fatima Khitab
HGHajera Gul
Hajera Gul
RKRozina Khattak
Rozina Khattak
JIJunaid Ihsan
Junaid Ihsan
Hani Amir AouissiHani Amir Aouissi
Hani Amir Aouissi
Photocatalysis is a promising technology for the degradation of recalcitrant organic pollutants in water. In this study, superparamagnetic zinc ferrite nanoparticles (ZnFe2O4) were synthesized and characterized using scanning electron microscopy, X-ray diffraction, energy dispersive X-ray and Fourier transform infrared spectroscopy. The synthesized nanoparticles (NPs) of ZnFe2O4 were observed to have a photosensitive nature and showed characteristic visible-light-induced activation that was used for the photocatalytic degradation of a textile dye, Remazol brilliant violet 5R (RBV-5R). The effect of different operational parameters such as pH, H2O2, catalyst dosage, concentration of RBV-5R and the reusability of ZnFe2O4 as well as scavengers were investigated under visible irradiation. The almost complete degradation (99.9%) of RBV-5R was observed at pH 10, 0.1 g of ZnFe2O4 and 6 mM of H2O2 in 30 min. The photocatalytic degradation of RBV-5R followed pseudo-first-order kinetics. The mineralization was calculated from total organic carbon (TOC) that was represented by 82% TOC removal in 30 min. The results revealed that visible-light-induced ZnFe2O4 photocatalysis may be a promising technology for the elimination of toxic organic dyes, such as RBV-5R, from water resources.

25 September 2022 in Water
Verified
Journal Article
Open access
PDF file
TUToheed Ullah
Toheed Ullah
HGHajera Gul
Hajera Gul
FKFatima Khitab
Fatima Khitab
RKRozina Khattak
Rozina Khattak
YAYousaf Ali
Yousaf Ali
Ivar ZekkerIvar Zekker
Ivar Zekker
Sugarcane bagasse is an inexpensive and eco-friendly natural biosorbent for the removal of various organic pollutants. The adsorption of Remazol Brilliant Violet-5R (RBV-5R) dye on sugarcane bagasse (SCB) was studied. Biosorbent was characterized using EDX and FTIR. The effect of various experimental parameters, such as pH, biosorbent dosage, initial dye concentration, contact time, adsorption with shaking and without shaking, and the temperature, was optimized. At pH 6, maximum biosorption of 92.22% was achieved using 0.15 g of SCB. The equilibrium was attained within 30–40 min for the removal of RBV-5R. The initial dye concentration of 10 µg/mL was determined as an optimum concentration for maximum removal of RBV-5R at 30 °C. Langmuir and Freundlich adsorption isotherms were applied, and it was found that the biosorption of RBV-5R follows Freundlich adsorption isotherms. Kinetic studies were also carried out and it was found that the proposed method followed the pseudo-second-order kinetic model (R2 = 0.98). From desorption study, it was found that maximum desorption in the increasing order was obtained using ethanol, methanol, and 0.2 M sodium hydroxide (NaOH). The biosorption study was applied to actual textile waste effluent to pave way for the practical usage of this technology on a larger scale and the results were found effective.

8 March 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
SSSyed Fawad Ali Shah
Syed Fawad Ali Shah
FKFatima Khitab
Fatima Khitab
SRShagufta Rasool
Shagufta Rasool
RKRozina Khattak
Rozina Khattak
TTTasmia Tasmia
Tasmia Tasmia
ZVZane Vincevica-Gaile
Zane Vincevica-Gaile
This study reveals the modification of the surface area of natural zeolite Clinoptilolite (CLN) by implementing the ion exchange method. The ammonium chloride cation exchange method was adopted and was followed by calcination at 450 °C for 5 h. This procedure helps to increase the surface area of CLN and also enhances its adsorption efficiency. The modifications of the CLN were confirmed by Fourier-transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) analysis. The efficiency and adsorption capacity of the modified CLN were determined by the adsorption of a Rhodamine B (Rh B) dye from an aqueous medium. The comparative analysis of the adsorption efficiency of raw CLN and the modified CLN revealed an enhanced adsorption of Rh B by the modified CLN at pH = 10. For desorption, different solvents were used. The results showed good desorption in ethanol and methanol, and poor desorption in acidic (HCl) and basic (NaOH) solutions. The kinetic study of the adsorption of Rh B by the modified CLN helped us to conclude that the adsorption follows a pseudo-second-order kinetics. For the surface study and to understand the mechanism of adsorption, several isotherm models were applied to the adsorption data at equilibrium. The data showed consistency with the Freundlich adsorption isotherm confirming that the process took place at its heterogeneous surface. The experimentally calculated adsorption capacity of the modified CLN was 2.81 mg g−1, showing a comparable value to certain other common adsorbents. Therefore, the modified CLN may also be considered a cost-effective and promising adsorbent for the removal of Rh B dye from wastewater.

13 January 2022 in International Journal of Environmental Analytical Chemistry
Verified
Journal Article
Closed access
FKFatima Khitab
Fatima Khitab
JSJasmin Shah
Jasmin Shah
MJMuhammad Rasul Jan
Muhammad Rasul Jan
A comparative study of Cu-impregnated ZnO and Ni-impregnated ZnO for the sonophotocatalytic degradation of cefixime in aqueous solution under visible light irradiation was carried out. Sonophotocatalysts were prepared by using a wet impregnation method and characterised using different spectroscopic techniques. Sonophotocatalytic efficiency of degradation is superior to photolysis, sonolysis, photocatalysis and sonocatalysis. Different operational parameters like pH, catalyst dosage, different enhancers, scavenger’s effect, initial concentration of drug, reusability of catalyst and catalyst settling time were optimised. Optimum time of 30 min was found for the 45.7% degradation of cefixime using Cu-ZnO and 42.2% degradation using Ni-ZnO photocatalysts at pH 10. The degradation of cefixime increased from 75.3% to 100% with 5 mmol of hydrogen peroxide using 0.1 g/ L of Cu-ZnO and 99.8% using 0.15 g/L of Ni-ZnO, while other oxidising agents were found less effective using (Cu–ZnO-Ni-ZnO) photocatalyst. A very little decrease in degradation was observed with different types of scavengers. Catalyst reusability was checked up to three cycles and good results up to three cycles were achieved and followed pseudo-first-order kinetic model. Furthermore, the sonophotocatalytic activity was tested for real pharmaceutical wastewater resulting in 91 and 89% removal of total organic carbon (TOC) using (Cu-ZnO-Ni-ZnO), respectively. The proposed method was successfully applied on commercial and synthetic sample with satisfactory results.