One of the major challenges faced by the biomedical industry is the development of robust synthetic surfaces that can resist bacterial colonization. Much inspiration has been drawn recently from naturally occurring mechano-bactericidal surfaces such as the wings of cicada (Psaltoda claripennis) and dragonfly (Diplacodes bipunctata) species in fabricating their synthetic analogs. However, the bactericidal activity of nanostructured surfaces is observed in a particular range of parameters reflecting the geometry of nanostructures and surface wettability. Here, several of the nanometer-scale characteristics of black silicon (bSi) surfaces including the density and height of the nanopillars that have the potential to influence the bactericidal efficiency of these nanostructured surfaces have been investigated. The results provide important evidence that minor variations in the nanoarchitecture of substrata can substantially alter their performance as bactericidal surfaces.

• Two-faceted (DAP) ― more favorable configuration than single-faceted (OAP) under UV irradiation. • Bare and modified DAP ― efficient charge carriers’ separation under UV irradiation. • Noble metal-modified OAP ― higher activity than respective DAP under vis irradiation. • “Hot” (plasmonic) electron transfer via shallow electron traps in OAP. • Localization of noble metal on DAP – key factor of vis activity.

Synthetic dimensions, which simulate spatial coordinates using nonspatial degrees of freedom, are drawing interest in topological science and other fields for modeling higher-dimensional phenomena on simple structures. We present the first realization of a synthetic frequency dimension on a silicon ring resonator integrated photonic device fabricated using a CMOS process. We confirm that its coupled modes correspond to a one-dimensional tight-binding model through acquisition of up to 280-GHz bandwidth optical frequency comb-like spectra and by measuring synthetic band structures. Furthermore, we realized two types of gauge potentials along the frequency dimension and probed their effects through the associated band structures. An electric field analog was produced via modulation detuning, whereas effective magnetic fields were induced using synchronized nearest- and second nearest–neighbor couplings. Creation of coupled mode lattices and two effective forces on a monolithic Si CMOS device represents a key step toward wider adoption of topological principles.

The creation of anti-reflective surfaces is reliant on the engineering of the surface textures and patterns to enable efficient trapping or transmission of light. Here we demonstrate anti-reflective layers composed of hierarchical nano/microscale features that are prepared on Si using a combination of wet and dry etching processes, and which are both scalable and affordable. The performance of the structured surfaces was tested through optical measurements of the reflectance, transmittance, and scattering spectra from the visible to mid-infrared wavelength regions, and the results were verified using numerical simulations to identify the performance of the textured anti-reflective layers. The anti-reflective properties of the layers were shown to be dramatically improved by the composite nanostructured surfaces over a broad spectral range, which thus provides a basis for the design rules that are essential for the progress towards effective anti-reflector fabrication. At normal incidence, the hierarchical surfaces achieve reflectances that are 10–80 times lower than that of conventional single-etch nano-microstructures. Portions of the absorbed, transmitted, scattered, and reflected light in the visible-IR spectrum are presented to illustrate the results.

Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective.