Liyana Ahmad Sofri

Dr. Liyana Ahmad Sofri

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2014 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
MRMustaqqim Abdul Rahim
Mustaqqim Abdul Rahim
NINorlia Mohamad Ibrahim
Norlia Mohamad Ibrahim
ZIZulliza Idris
Zulliza Idris
ZGZuhayr Md Ghazaly
Zuhayr Md Ghazaly
SSShahiron Shahidan
Shahiron Shahidan
NINur Fitriah Isa
Nur Fitriah Isa
The use of pozzolanic material from waste product as partial cement replacement in concrete contribute to reduce the environmental, economic problem through their waste and as well enhance the strength and properties of concrete. Rice husk ash (RHA) is one of the industrial waste that suitably used as a cement replacement due to its pozzolanic properties which can enhance the properties of concrete. In this study, the workability, compressive strength and water absorption of the concrete containg RHA is investigating. The chemical content of RHA also investigated by using X-ray Fluorescence Test (XRF). The different RHA percentage of 5%, 15% and 25% were used in this study with burning temperature 650°C. The concrete cube of size 100 mm x 100 mm x 100 mm were prepared and cured for 7, 14 and 28 days. Based on result, it was concluded that the optimum RHA replacement for cement in this report was 5 %, which provided the highest compressive strength at 28 days.

17 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
LSLiyana Ahmad Sofri
Liyana Ahmad Sofri
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
Andrei Victor SanduAndrei Victor Sandu
Andrei Victor Sandu
Thanongsak ImjaiThanongsak Imjai
Thanongsak Imjai
Petrica VizureanuPetrica Vizureanu
Petrica Vizureanu
FRFarahiyah Abdul Rahman
Farahiyah Abdul Rahman
This study examines the strength development of fly ash-based geopolymer (FAG) as a stabilizer for road base material for pavement construction. In the last decade, there has been a rapid development of conventionally treated bases, such as cement-treated bases. However, a major problem with this kind of application is the shrinkage cracking in cement-treated bases that may result in the reflection cracks on the asphalt pavement surface. This study explores the effects of FAG on base layer properties using mechanistic laboratory evaluation and its practicability in pavement base layers. The investigated properties are flexural strength (FS), unconfined compressive strength (UCS), shrinkage, and resilient modulus (RM), as well as indirect tensile strength (ITS). The findings showed that the mechanical properties of the mixture enhanced when FAG was added to 80–85% of crushed aggregate, with the UCS being shown to be a crucial quality parameter. The effectiveness of FAG base material can have an impact on the flexible pavements’ overall performance since the base course stiffness directly depends on the base material properties. As a stabilizing agent for flexible pavement applications, the FAG-stabilized base appeared promising, predicated on test outcomes.

15 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
MMMd Azree Othuman Mydin
Md Azree Othuman Mydin
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
MNM. N. M. Nawi
M. N. M. Nawi
ZYZarina Yahya
Zarina Yahya
LSLiyana Ahmad Sofri
Liyana Ahmad Sofri
Petrica VizureanuPetrica Vizureanu
Petrica Vizureanu
Foamed concrete is considered a green building material, which is porous in nature. As a result, it poses benefits such as being light in self-weight, and also has excellent thermal insulation properties, environmental safeguards, good fire resistance performance, and low cost. Nevertheless, foamed concrete has several disadvantages such as low strength, a large amount of entrained air, poor toughness, and being a brittle material, all of which has restricted its usage in engineering and building construction. Hence, this study intends to assess the potential utilization of polypropylene fibrillated fiber (PFF) in foamed concrete to enhance its engineering properties. A total of 10 mixes of 600 and 1200 kg/m3 densities were produced by the insertion of four varying percentages of PFF (1%, 2%, 3%, and 4%). The properties assessed were splitting tensile, compressive and flexural strengths, workability, porosity, water absorption, and density. Furthermore, the correlations between the properties considered were also evaluated. The outcomes reveal that the foamed concrete mix with 4% PFF attained the highest porosity, with approximately 13.9% and 15.9% for 600 and 1200 kg/m3 densities in comparison to the control specimen. Besides, the mechanical properties (splitting tensile, compressive and flexural strengths) increased steadily with the increase in the PFF percentages up to the optimum level of 3%. Beyond 3%, the strengths reduced significantly due to poor PFF dispersal in the matrix, leading to a balling effect which causes a degraded impact of scattering the stress from the foamed concrete vicinity to another area of the PFF surface. This exploratory investigation will result in a greater comprehension of the possible applications of PFF in LFC. It is crucial to promote the sustainable development and implementation of LFC materials and infrastructures.

12 November 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
LSLiyana Ahmad Sofri
Liyana Ahmad Sofri
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
MHM. R. M. Hasan
M. R. M. Hasan
YHY. Huang
Y. Huang
In this paper, a preliminary study is performed on the application of Class-C fly ash based geopolymer as road base material. The Class-C fly ash as a base material is collected from Manjung Coal-Fired Power Station, Lumut, Perak Malaysia. Geopolymer was produced by the reaction of fly ash with an alkaline activator (a mixture of Na2SiO3 and NaOH solutions). The effects of various NaOH concentration and fly ash/alkaline activator ratio to the strength of geopolymer paste were studied. The concentration of NaOH used in this study was 8 M, 10 M and 12 M. Various ratios of fly ash/alkaline activator (1.0, 2.0 and 3.0) and a constant ratio of Na2SiO3/NaOH at 2.5 were studied to define the maximum compressive strength. Tests were carried out on 50 × 50 × 50 mm3 cube geopolymer specimens and the test was conducted on the day-7 and day-28 for all samples. Results revealed that the 10 M NaOH concentration with the fly ash/alkaline activator of 3.0 is deduced as the optimum ratio, which exhibited the highest compressive strength at day-28 of testing.

20 May 2016 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
ZGZuhayr Md Ghazaly
Zuhayr Md Ghazaly
MRMustaqqim Abdul Rahim
Mustaqqim Abdul Rahim
KJKok Alfred Chee Jee
Kok Alfred Chee Jee
NINur Fitriah Isa
Nur Fitriah Isa
LSLiyana Ahmad Sofri
Liyana Ahmad Sofri
Slope stability analysis is one of the ancient tasks in the geotechnical engineering. There are two major methods; limit equilibrium method (LEM) and finite element method (FEM) that were used to analyze the factor of safety (FOS) to determine the stability of slope. The factor of safety will affect the remediation method to be underdesign or overdesign if the analysis method was not well chosen. This can lead to safety and costing problems which are the main concern. Furthermore, there were no statement that issued one of the analysis methods was more preferred than another. To achieve the objective of this research, the soil sample collected from landslide at Wang Kelian were tested to obtain the parameters of the soils. Then, those results were inserted into Plaxis and Slope/W software for modeling to obtain the factor of safety based on different cases such as geometry and homogenous of slope. The FOS obtained by FEM was generally lower compared to LEM but LEM can provide an obvious critical slip surface. This can be explained by their principles. Overall, the analysis method chosen must be based on the purpose of the analysis.

1 January 2017
Verified
Conference Paper
Closed access
ZGZuhayr Md Ghazaly
Zuhayr Md Ghazaly
MRMustaqqim Abdul Rahim
Mustaqqim Abdul Rahim
VHVoo Kien Hiung
Voo Kien Hiung
NINur Fitriah Isa
Nur Fitriah Isa
LSLiyana Ahmad Sofri
Liyana Ahmad Sofri
With the growing of population and density in metropolitan areas, especially for the narrow space areas, high rise buildings are the best choice to fulfil the demands for the lacking spaces for development. Hence, it seems deep excavation is necessary to construct underground spaces. Control of soil deformation is crucial for deep excavation in congested urban area to minimize its effect on adjacent structures. During excavation of the soil, retaining walls are required to retain the soil behind it. Therefore, an appropriate method or modelling is required to determine the movement of retaining wall due to lateral earth pressure acts behind it. Finite Element Method (FEM) utilizing computer program PLAXIS, was used to estimate the wall and ground deformation at each stage of excavation.