Smart home systems (SHSs) are a modern lifestyle trend, changing daily lives in the most intuitive way. To connect and operate various smart devices under one system, an accurate, convenient, and secure control method is of utmost significance. Nowadays, most smart home control systems are based on radio-frequency (RF) technologies such as Bluetooth, Wi-Fi, and Zigbee. They tend to suffer from poor location accuracy in high-density environments due to the interference and noise in RF signals as well as their penetration through walls, leading to security vulnerabilities and low-precision control. To address these issues, this paper presents a smart home control system based on visible light communication (VLC), with enhanced security and accurate localization for precise and convenient control. The system includes an AC lightbulb, a smartphone running the position and control applications, and a cloud server with location-based access and a database of smart home devices. The design of the AC lightbulb integrates VLC and Bluetooth connectivity in a standard form factor for easy installation and plug-n-play capability. A smartphone camera-based 3D indoor positioning and orientation algorithm that allows precise control by pointing the smartphone the device is also presented. We demonstrate the feasibility of this system through prototype implementation and experimental verification.
Wireless communication technology adopting electromagnetic waves in an unlicensed spectrum, such as visible light, for communication has attracted wide research efforts. Visible light communication (VLC) utilizes visible light as a communication medium to transmit signals but faces a limited communication bandwidth and low data rate, which is caused by the intrinsic characteristics of LEDs. This paper first studies a mathematical model of limited bandwidth and its effect on transmitted signals and then analyzes the free space and underwater channel loss. With the theoretical analysis, a VLC transceiver system is presented for solving bandwidth limitation by utilizing a pulse-amplitude modulation-8 (PAM-8) scheme and a hybrid equalization method. The proposed hybrid equalization combined a passive equalizer, a neural network (NN)-based feed-forward equalization (FFE), and a radial basis function neural network (RBF-NN). The feasibility of this VLC system was verified through a co-simulation platform with both free-space and underwater channels. Compared with a VLC system adopting a deep neural network (DNN)-based post-equalization method, the proposed VLC system could achieve a data rate of 3.6 Gbps with a bit error rate (BER) of 3.8 × 10−3 over a 3 m free-space channel. The RBF-NN achieved a reduced training time of 10 min, which was 86.7% lower than the conventional DNN-based post-equalization method.
A wideband MMIC power amplifier at W-band is reported in this letter. The four-stage MMIC, developed using 0.1 μm GaAs pseudomorphic HEMT (PHEMT) technology, demonstrated a flat small signal gain of 12.4 ± 2 dB with a minimum saturated output power (Psat) of 14.2 dBm from 77 to 100 GHz. The typical Psat is better by 16.3 dBm with a flatness of 0.4 dB and the maximum power added efficiency is 6% between 77 and 92 GHz. This result shows that the amplifier delivers output power density of about 470 mW/mm with a total gate output periphery of 100 μm. As far as we know, it is nearly the best power density performance ever published from a single ended GaAs-based PHEMT MMIC at this frequency band.