An Al-40.0Ge-3.4Si wt.% alloy foil with a thickness of 50 ± 5 μm, obtained via an ultrafast solidification method, is described in this work. A complete wetting of the aluminum alloy substrate with a wetting angle of 0° is observed, and the formation of a drop with a wetting angle of 30 ± 5° is observed on the steel substrate. Similar and dissimilar brazed joints of aluminum alloy AA 6082 and stainless-steel AISI 304 are obtained. The microstructure of the AA 6082/AA 6082 brazed seam is homogeneous and contains particles of an Al7Fe2Si system intermetallic compound and particles of an Al-Ge eutectic composition. The brazed seam of the AISI 304/AISI 304 joint is formed due to the formation of the Al8Fe2(Si, Cr) intermetallic compound reaction layer on the steel surface. The proposed scheme for the AISI 304/AA 6082 brazed joint formation is given. The brazed seam represents the Al8Fe2(Si, Cr) reaction layer on the steel surface, the thickness of which depends on the holding time during brazing, and the aluminum matrix of which has particles of a composition close to an Al-Ge eutectic. The obtained results could be used for the optimization of time–temperature brazing modes in order to improve the mechanical characteristics of AISI 304/AA 6082 dissimilar joints.
Compositionally complex solid solutions (CCSS), often called high-entropy alloys (HEA) have emerged as a promising platform for electrocatalysts for the hydrogen evolution reaction (HER). However, due to their complexity, the interplay among surface composition, structure, and catalytic activity remains insufficiently understood. Herein, noble-metal-based CCSS thin-film materials libraries, prepared by combinatorial magnetron sputtering, are employed as a platform to elucidate how HER activities of CCSS electrocatalysts are linked to their volume composition through surface segregation and crystal structure. High-throughput investigations of three CCSS material libraries, Ir–Pd–Pt–Rh–Ru, Ag–Au–Pd–Pt-Ru, and Ag–Au–Cu–Pd-Pt, were conducted to assess their structural, compositional, and electrochemical properties, using high-throughput X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) coupled with Gaussian process regression, and long-range scanning electrochemical cell microscopy (SECCM). Correlative data analysis revealed that the composition-dependent surface segregation, driven by surface energy differences, modulates the distribution of active sites on the surface. We identified Ir10Pd15Pt46Rh12Ru17 as the most active volume composition for HER which corresponds to a surface composition of Ir6Pd17Pt50Rh11Ru16. Moreover, the HER trends were governed not only by the intrinsic activity of the constituent elements but also by unexpected synergetic effects between them. The findings offer direct insights into composition–structure–activity relationships in compositionally complex electrocatalysts.
The robust diagnosis of conditions generated in warm dense matter experiments remains a persistent challenge. Here, we describe the measurement of shock-compressed aluminium at 50 GPa with angle-resolved femtosecond x-ray Thomson scattering (XRTS) over a wide range of scattering wave vectors at the European X-Ray Free-Electron Laser. The measured plasmon dispersion and line shape show that the standard approach for analyzing XRTS spectra, using uniform-electron-gas models, systematically overestimates the resonance energy by up to 8 eV. We present an approach using methods that agrees within the experimental uncertainty and demonstrates how accounting for shock-induced disorder in shock-compressed systems is critical for their understanding, providing evidence that treatments are required for reliable XRTS inference in warm dense aluminium.