Laifa Lu

Mr. Laifa Lu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
QYQizhi Yang
Qizhi Yang
LLLaifa Lu
Laifa Lu
DXDing Xia
Ding Xia
WZWeitao Zhang
Weitao Zhang
HYHao Yan
Hao Yan
In order to enhance the fluid mixing in the stirred tank and reduce the power consumption under the condition of full baffle, a sinusoidal sawtooth baffle was established in the present study. Based on the Eulerian–Eulerian method, a numerical simulation of the mixed flow in the stirred tank was conducted, and the reliability of the simulation method was verified by means of PIV experiments. The different structural characteristics of a standard baffle and the sine baffle were compared, to explore the effect of the modified baffle on flow mixing and power consumption in the tank. The outcomes indicate that the sinusoidal sawtooth structure had the effect of reducing drag and shunting, which could lessen the backflow on the backside of the baffle, strengthen the intensity of fluid turbulence and strain rate, improve the uniformity of particle distribution, and significantly lower the power consumption. When the relative tooth height was 0.333 and the relative tooth width was 0.028, the power consumption was reduced by 11.7%.

30 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
BXBiao Xu
Biao Xu
LLLaifa Lu
Laifa Lu
WJWeiya Jin
Weiya Jin
ZMZijian Mao
Zijian Mao
As an essential fluid machine in national production, the optimal design of the performance of fans has long been a focus of research. In the format of small diagonal flow fans with rear guide vanes, there are too many design variables, and the design parameters interact with each other, resulting in a degradation of the fan’s performance under actual operating conditions. Under realistic conditions, many uncertainties exist in the object of study and fluctuations in variables and parameters lead to a specific deviation of the optimization target from the design target. A method is needed for the robust and optimal design of angular flow fans under stochastic operating conditions of the design variables. In this paper, a multi-objective aerodynamic performance powerful design method is proposed using Pearson correlation analysis, combined with CFD calculation method, Latin hypercube experimental design and the Kriging agent model, to optimize the rear guide vane structural parameters of the diagonal flow fan under uncertain aerodynamic performance conditions, analyze the flow field characteristics before and after the modification, and select the optimal design model for the release. The test results show that the total pressure of the optimized fan is increased by 86 Pa, and the noise is reduced by 2.4 dB. The proposed optimization method is effective and can also be used to optimize the performance of other types of fans.

27 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
LLLaifa Lu
Laifa Lu
BXBiao Xu
Biao Xu
JHJiacheng He
Jiacheng He
DXDing Xia
Ding Xia
Due to the advantages of a high total pressure coefficient, large flow coefficient, and high efficiency, the diagonal flow fan is widely used in people’s livelihood and industrial fields. However, the design of the diagonal flow fan is mostly empirical, multi-solution, and comprehensive. The traditional optimization design process often consumes huge computing resources. In this paper, the diagonal flow fan blade is parameterized, the design variables are determined, and the accuracy of the parameterization method is verified. The maximum fitting error is controlled at approximately 0.1%. Based on the parametric design of blades, this paper organically integrates the traditional Kriging model and RBF model, and introduces the Ensemble of surrogates model (ES) to verify that the ES model has higher prediction accuracy in the prediction of fan flow and total pressure efficiency than the traditional prediction model. Subsequently, the Pareto optimal solution set of the approximate model within the global design scope is searched by NSGA-II. The numerical simulation and experimental verification show that the actual flow of the fan increases by 10% and the efficiency of the full pressure increases by 3.2% under the design condition of the optimized blade. The optimized model can significantly improve its air performance.

24 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
TWTianci Wang
Tianci Wang
ZMZijian Mao
Zijian Mao
LLLaifa Lu
Laifa Lu
Large curvature, high pre-swirl large high-speed centrifugal fans are the preferred choice for industrial gas quenching furnaces, as they need to operate under non-uniform inlet conditions for extended periods. The resulting inlet distortion disrupts the symmetric flow of the gas, leading to reduced fan stability and phenomena such as flow separation and rotational stall. This issue has become a key research focus in the field of large centrifugal fan applications. This paper introduces an eddy viscosity correction method, and compares it with experimental results from U-shaped pipe curved flow. The corrected SST k-ω model shows a maximum error of only 4.7%. Simulation results show that the fan inlet generates a positive pre-swirl inflow with a relative distortion intensity of 3.83°. The flow characteristics within the impeller passage are significantly affected by the swirl angle distribution. At the maximum swirl angle, the leakage flow at the blade tip develops into a stall vortex that spans the entire passage, with an average blockage coefficient of 0.29. At the minimum swirl angle, the downstream leakage flow at the blade tip is suppressed on the suction side by the main flow, leading to a reduced vortex structure within the passage and an average blockage coefficient of 0.21. To address the design challenges of large high-speed centrifugal fans under inlet distortion, a blade design method based on secondary flow suppression is proposed. Eleven impeller flow surfaces are selected as control parameters, and the centrifugal impeller blade profile is redesigned. Numerical simulations and experimental results of the gas quenching furnace’s flow and temperature fields indicate that the modified impeller significantly reduces the blade tip leakage flow strength, with the average blockage coefficient decreasing to 0.07 and 0.04, respectively. The standard deviation of the average flow velocity at the test section is reduced by 42.78% compared to the original, and the temperature fluctuation at the workpiece surface is reduced by 53.09%. Both the flow and temperature field uniformity are significantly improved.