Hao Yan

Dr. Hao Yan


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2020 in Water
Verified
Journal Article
Open access
PDF file
Ling ZhouLing Zhou
Ling Zhou
WWWanhong Wang
Wanhong Wang
JHJianwei Hang
Jianwei Hang
WSWeidong Shi
Weidong Shi
HYHao Yan
Hao Yan
Yong ZhuYong Zhu
Yong Zhu
The end clearance of the impeller is one of the most important structural parameters in the hydraulic design of a high-speed electrical submersible pump (ESP). In this paper, an ESP with a rotating speed of 6000 r/min was taken as the research object. Numerical calculations were carried out for five different end clearance conditions of 0.1 mm, 0.3 mm, 0.6 mm, 0.9 mm, and 1.2 mm, respectively, to obtain the performance and internal flow field under different situation. The simulation results were verified by the pump performance experiment. It showed that the increase of the end clearance led to a decrease of the head and efficiency of the electrical submersible pump. Through the analysis of the internal flow field, it was found that the existence of the end clearance reduced the flow rate and caused free pre-whirl. With the increase of the end clearance, the phenomenon of de-flow in the diffuser passage was aggravated, which further reduced the performance of the electrical submersible pump. Finally, the reasonable recommended value of the end clearance was given, which facilitated the optimization design and engineering application of the high-speed ESP.

6 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
QYQizhi Yang
Qizhi Yang
LLLaifa Lu
Laifa Lu
DXDing Xia
Ding Xia
WZWeitao Zhang
Weitao Zhang
HYHao Yan
Hao Yan
In order to enhance the fluid mixing in the stirred tank and reduce the power consumption under the condition of full baffle, a sinusoidal sawtooth baffle was established in the present study. Based on the Eulerian–Eulerian method, a numerical simulation of the mixed flow in the stirred tank was conducted, and the reliability of the simulation method was verified by means of PIV experiments. The different structural characteristics of a standard baffle and the sine baffle were compared, to explore the effect of the modified baffle on flow mixing and power consumption in the tank. The outcomes indicate that the sinusoidal sawtooth structure had the effect of reducing drag and shunting, which could lessen the backflow on the backside of the baffle, strengthen the intensity of fluid turbulence and strain rate, improve the uniformity of particle distribution, and significantly lower the power consumption. When the relative tooth height was 0.333 and the relative tooth width was 0.028, the power consumption was reduced by 11.7%.

24 May 2023 in Frontiers in Energy Research
Verified
Journal Article
Open access
CLChen Liang
Chen Liang
HYHao Yan
Hao Yan
XTXie Tengzhou
Xie Tengzhou
LZLi Zhiguo
Li Zhiguo
Centrifugal pump, which is widely used in water conservancy, electric power, petrochemical, ship, aerospace, and other technical fields, is the core equipment used to ensure all kinds of energy transfer. Cavitation not only affects the service life of the centrifugal pump but also seriously impacts the reliability of the process flow or device system. Due to the influence of the life, position and number of vibration sensors, the existing cavitation fault feature identification accuracy is not enough. The state analysis and characteristic recognition of the current signal under the cavitation state of the centrifugal pump are conducted in this paper based on soft sensing technology, and the signal component and judgment threshold representing the cavitation state are obtained. The following results are presented. Under different critical cavitation numbers, a small number of bubbles appeared near the suction surface of the inlet edge of the impeller, which verified the reliability of criterion for the critical cavitation number when the head coefficient decreased by 3%. The overall accuracy of binary classification cavitation recognition based on the current signal is 12.9% higher than that of three classification cavitation recognition. The recognition rate of VMD decomposition under different working conditions is higher than that of EMD, in design conditions, for example, overall accuracy improved by 7.3%, which also indicates that the obtained cavitation information of each component by VMD decomposition is richer than that obtained by EMD decomposition. Comparing different working conditions, a large flow rate easily leads to cavitation and high recognition current rate, compared with the flow of 0.75 Q and 1.25 Q, the overall accuracy is improved by 9.6%.

1 June 2018 in International Journal of Simulation Modelling
Verified
Journal Article
Closed access
HYHao Yan
Hao Yan
QLQ. Li
Q. Li
YZY. Zhang
Y. Zhang
HSH. X. Shi
H. X. Shi
VVV. Vnenkovskaia
V. Vnenkovskaia

1 April 2024 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
Ling ZhouLing Zhou
Ling Zhou
BWBo Wang
Bo Wang
DZDongfang Zhen
Dongfang Zhen
LBLing Bai
Ling Bai
HYHao Yan
Hao Yan
Spherocylindrical particles encompass elongated spherical particles, such as biomass particles utilized in thermal reactions and capsule pills in the pharmaceutical industry, along with various other particles found in industrial production processes. Understanding the flow behavior of spherocylindrical particles within a spouted bed holds significant practical importance. This study delves into investigating the fluidization characteristics of spherocylindrical particles with varying aspect ratios within a spouted bed. Key parameters studied include particle void fraction, velocity, orientation, and mixing. These were analyzed using the computational fluid dynamics–discrete element method, and the simulation model's accuracy was verified through high-speed photography experiments. The findings revealed distinct void fraction distributions at different locations within the bed. Particles in the higher-bed region exhibited larger void fractions with flatter peaks compared to those in the lower-bed region. Moreover, the correlation between particle aspect ratio and void fraction varied at different heights within the bed. Notably, there was no significant correlation observed between particle aspect ratio and particle velocity. However, the larger the particle aspect ratio/gas velocity, the better the particle mixing quality. Additionally, gas velocity and particle aspect ratio had little effect on particle orientation, but there was a tendency for particle orientation angles to hover around 45°–60° near the wall region.

16 September 2022 in Atmosphere
Verified
Journal Article
Open access
PDF file
HYHao Yan
Hao Yan
SLShisong Liu
Shisong Liu
FWFei Wang
Fei Wang
WXWei Xu
Wei Xu
JLJian Li
Jian Li
YZYishan Zeng
Yishan Zeng
A vital component that is frequently employed in the industrial powder conveying sector is the fluidized bed. In the light of powder unloading with a fluidized bed as the research object, an orthogonal experiment with two factors and four levels was established for the structural parameters of the fluidized bed. In the case of different noise factors, 16 schemes are designed and all schemes via computational fluid dynamics numerical simulation. The Taguchi method and regression analysis are used to analyze the response. Finally, the accuracy of the optimization results is tested. The results show that gas velocity decreases sharply at the airway’s entrance and, then, gas flows to the second half of the airway and velocity decreases steadily and uniformly. Airway arc length L exerts a greater effect on the signal-to-noise ratio (SNR) than airway height H. The parameter combination of 180 mm L and 17 mm H for obtaining the optimal velocity distribution uniformity is determined. The test results indicate that the overall fluidization effect of the fluidized bed with the optimal parameters is better. The linked research findings can be used as a guide when designing a fluidized bed system for transporting comparable powder.