Shuiqing Zhou

Shuiqing Zhou


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 August 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
KYKe Yang
Ke Yang
WZWeitao Zhang
Weitao Zhang
KZKai Zhang
Kai Zhang
CWChihu Wang
Chihu Wang
WJWeiya Jin
Weiya Jin
The multi-blade centrifugal fan is commonly used in modern building ventilation and air-conditioning system. However, it does not readily satisfy the increasing demand for energy saving, high efficiency or noise reduction. Its performance is inherently limited by the geometrical structure of single circular arc blades. Q35-type multi-blade centrifugal fan studied as an example by combining the disturbance CST function to parameterize the blades. The optimization parameter change range is confirmed, and test samples are extracted before establishing an RBF proxy model. The NSGA-II algorithm is incorporated, and multi-objective optimization is performed with flow rate and total pressure efficiency as optimization goals. The results show that the fan performance is effectively improved. At the design working point, the air volume of the multi-blade centrifugal fan increases by 1.4 m3/min; at the same time, the total pressure efficiency increases by 3.1%, and the noise is reduced by 1.12 dB, applying the proposed design. The obtained higher fan efficiency can effectively improve performance of the whole ventilation and air-conditioning system. This novel optimization method also has relatively few parameters, which makes it potentially valuable for designing multi-wing centrifugal and other types of fans, providing a new idea for energy saving and emission reduction design of fan.

7 December 2023 in ACS Omega
Verified
Journal Article
Open access
DXDing Xia
Ding Xia
ZMZijian Mao
Zijian Mao
SZShuiqing Zhou
Shuiqing Zhou
XHXing He
Xing He
YWYixi Wang
Yixi Wang
Flow interferences occur in the dual-impeller stirred tank between paddles as well as between paddles and baffles and the tank wall, leading to inefficient utilization of the stirring energy. To address this issue, this study investigates the flow characteristics within the mixing tank using Euler-Euler numerical simulation and the particle image velocimetry (PIV) experimental method. The three-dimensional nonconstant flow characteristics are analyzed to optimize the critical stirrer geometry. By employing the Sobol method, an approximate model is established for sensitivity analysis to identify key parameters affecting the solid-liquid dual-impeller stirred tank's performance. Numerical simulations demonstrate that the optimized stirred tank exhibits a significantly improved solid-liquid suspension capacity and considerably reduces flow losses near the wall and baffle areas. Under the designated conditions, the cloud height is increased by 8.7%, and power consumption is reduced by 15.6% compared to the prototype. PIV tests performed on the stirred tank before and after optimization confirmed the reliability of the obtained optimization results. The primary objective of this study is to enhance mixing efficiency and homogeneity in solid-liquid mixing tanks while concurrently minimizing energy consumption and cost. These results validate the feasibility of employing a multiobjective optimal design approach that combines the RBF agent model with the Sobol method. The findings offer valuable insights for the design of similar mixing tanks.

6 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
QYQizhi Yang
Qizhi Yang
LLLaifa Lu
Laifa Lu
DXDing Xia
Ding Xia
WZWeitao Zhang
Weitao Zhang
HYHao Yan
Hao Yan
In order to enhance the fluid mixing in the stirred tank and reduce the power consumption under the condition of full baffle, a sinusoidal sawtooth baffle was established in the present study. Based on the Eulerian–Eulerian method, a numerical simulation of the mixed flow in the stirred tank was conducted, and the reliability of the simulation method was verified by means of PIV experiments. The different structural characteristics of a standard baffle and the sine baffle were compared, to explore the effect of the modified baffle on flow mixing and power consumption in the tank. The outcomes indicate that the sinusoidal sawtooth structure had the effect of reducing drag and shunting, which could lessen the backflow on the backside of the baffle, strengthen the intensity of fluid turbulence and strain rate, improve the uniformity of particle distribution, and significantly lower the power consumption. When the relative tooth height was 0.333 and the relative tooth width was 0.028, the power consumption was reduced by 11.7%.

16 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WJWeiya Jin
Weiya Jin
ZMZijian Mao
Zijian Mao
SZShuiqing Zhou
Shuiqing Zhou
TZTianle Zhang
Tianle Zhang
YHYinjie Hu
Yinjie Hu
政吴政晖 吴
政晖 吴
Nuclear grade axial flow fans are widely used in nuclear power plants for ventilation and heat dissipation and have the advantages of high efficiency and high flow rates. A nuclear grade axial flow fan with OGVs (outlet guide vanes) can recover the kinetic energy of the dynamic impeller outlet winding to increase the ventilator pressure, thus improving the ventilator efficiency; therefore, the OGVs play an essential role in the performance of the axial flow fan. Based on accurate numerical simulations, an MRGP approximation model was developed to analyse the factors affecting the OGVs duct and optimise the guide vane structure, combined with the Sobol method for sensitivity analysis. The experiments and numerical simulations show that the total pressure of the optimised model increases by 154 Pa, and the noise decreases by 4.1 dB. The multi-objective optimisation method using the parametric approach and combining it with the MRGP model is highly reliable. It provides a key design direction for optimising nuclear grade axial flow fans.

30 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
BXBiao Xu
Biao Xu
LLLaifa Lu
Laifa Lu
WJWeiya Jin
Weiya Jin
ZMZijian Mao
Zijian Mao
As an essential fluid machine in national production, the optimal design of the performance of fans has long been a focus of research. In the format of small diagonal flow fans with rear guide vanes, there are too many design variables, and the design parameters interact with each other, resulting in a degradation of the fan’s performance under actual operating conditions. Under realistic conditions, many uncertainties exist in the object of study and fluctuations in variables and parameters lead to a specific deviation of the optimization target from the design target. A method is needed for the robust and optimal design of angular flow fans under stochastic operating conditions of the design variables. In this paper, a multi-objective aerodynamic performance powerful design method is proposed using Pearson correlation analysis, combined with CFD calculation method, Latin hypercube experimental design and the Kriging agent model, to optimize the rear guide vane structural parameters of the diagonal flow fan under uncertain aerodynamic performance conditions, analyze the flow field characteristics before and after the modification, and select the optimal design model for the release. The test results show that the total pressure of the optimized fan is increased by 86 Pa, and the noise is reduced by 2.4 dB. The proposed optimization method is effective and can also be used to optimize the performance of other types of fans.

27 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuiqing Zhou
Shuiqing Zhou
LLLaifa Lu
Laifa Lu
BXBiao Xu
Biao Xu
JHJiacheng He
Jiacheng He
DXDing Xia
Ding Xia
Due to the advantages of a high total pressure coefficient, large flow coefficient, and high efficiency, the diagonal flow fan is widely used in people’s livelihood and industrial fields. However, the design of the diagonal flow fan is mostly empirical, multi-solution, and comprehensive. The traditional optimization design process often consumes huge computing resources. In this paper, the diagonal flow fan blade is parameterized, the design variables are determined, and the accuracy of the parameterization method is verified. The maximum fitting error is controlled at approximately 0.1%. Based on the parametric design of blades, this paper organically integrates the traditional Kriging model and RBF model, and introduces the Ensemble of surrogates model (ES) to verify that the ES model has higher prediction accuracy in the prediction of fan flow and total pressure efficiency than the traditional prediction model. Subsequently, the Pareto optimal solution set of the approximate model within the global design scope is searched by NSGA-II. The numerical simulation and experimental verification show that the actual flow of the fan increases by 10% and the efficiency of the full pressure increases by 3.2% under the design condition of the optimized blade. The optimized model can significantly improve its air performance.