Flexible steel plates are generally transported by rollers; however, the contact between the rollers and the steel plate degrades the surface quality of the plate. To solve this problem, noncontact transportation of steel plates using electromagnetic force has been proposed. However, ultrathin flexible steel plates can easily fall owing to deflection. A magnetic levitation system using electromagnets installed in the horizontal direction has also been proposed to improve the levitation performance of a conventional system. However, it is difficult to control vibrations with such a system because flexible steel plates are elastically deformed into complex shapes by gravity. Therefore, an electromagnetic levitation system was proposed, wherein electromagnets were installed near the edge of the steel plate such that it could be controlled with noncontact grip, such as by allowing one side of the steel plate to hang. This system is expected to improve levitation stability because the moment of inertia increases with vertical levitation and simplifies the control system. In addition, this system actively uses gravity acting on a steel plate to decrease its deflection. The use of gravity to suppress deflection is novel. In this study, the feasibility of magnetic levitation using the proposed system was investigated using magnetic field analysis. Its usefulness was investigated experimentally using a constructed magnetic levitation system. In addition, it was found that a magnetic levitation system that maintains the standing position generates a peculiar vibration.
A hybrid vehicle is a vehicle with two or more power sources. We propose a hybrid system in which the engine torque converted by the transmission is combined with an electric motor torque. The proposed system reduces transmission because engine torque only acts during transmission. Furthermore, the proposed hybrid system’s simple structure uses lightweight chains and sprockets that can be laid out in various ways. The realization of the proposed hybrid system requires independent control algorithms for the two power systems, engine and electric motor, that take into consideration the state of the vehicle and the driver’s input; this system can be assumed to be a servo model system with multiple inputs and outputs and analyzed to obtain the optimal operation algorithm. To apply these controls to race cars, which are required to be fast, it is necessary to obtain the reference input, which is the optimal velocity and yaw angle while traveling the course of the servo system, and simulations of the competition track must be carried out. Therefore, the dynamic performance of the hybrid system was investigated by calculating the lap times on a given circuit using a quasi-steady-state method with low computational load and high prediction accuracy. In this study, the effects of changing the electric motor and final gear ratios on the driving performance of a rear-wheel-drive parallel hybrid system for optimization were investigated. The simulation results show that not only can the optimum settings be obtained by changing the final and electric motor reduction ratios on the evaluation circuit, but also that the optimum values vary across different speed ranges on different circuits.
Mechanical vibrations adversely affect mechanical components, and in the worst case, lead to serious accidents by breaking themselves. To suppress vibrations, various studies have been conducted on vibration isolation, suppression, and resistance. In addition, technologies to actively suppress vibration have been rapidly developed in recent years, and it has been reported that vibrations can be suppressed with higher performance. However, these studies have been conducted mostly for low-order systems, and few studies have employed control models that consider the complex vibration characteristics of multi-degree-of-freedom (DOF) systems. This study is a basic study that establishes a control model for complex control systems, and the vibration characteristics of a 2-DOF system are calculated using the vibration analysis of a multi-DOF system. Furthermore, the vibration suppression performance of the 2-DOF system is investigated by performing vibration experiments.
Recently, research on non-contact conveyance systems using electromagnetic levitation technology has accelerated. We have constructed an electromagnetic levitation control system that keeps the relative distance between the electromagnet and steel plate constant. To investigate the levitation stability of thin steel plates, we performed magnetic levitation experiments on a thin steel plate with curvature. A physical disturbance was applied to the electromagnet units by vibrators. The electromagnet units were vibrated up and down by a vibrator. We investigated whether the bending magnetic levitation improved the levitation performance even if the magnetic levitation system was in a vibrating environment. We determined that it was possible to realize stable levitation for a steel plate under external disturbances during levitation at the optimal bending angle.
The yaw acceleration required for circuit driving is determined by the time variation of the yaw rate due to two factors: corner radius and velocity at the center of gravity. Torque vectoring systems have the advantage where the yaw moment can be changed only by the longitudinal force without changing the lateral force of the tires, which greatly affects lateral acceleration. This is expected to improve the both the spinning performance and the orbital performance, which are usually in a trade-off relationship. In this study, we proposed a yaw moment control technology that actively utilized a power unit with a brake system, which was easy to implement in a system, and compared the performance of vehicles equipped with and without the proposed system using the Milliken Research Associates moment method for quasi-steady-state analysis. The performances of lateral acceleration and yaw moment were verified using the same method, and a variable corner radius simulation for circuit driving was used to compare time and performance. The results showed the effectiveness of the proposed system.
We investigated whether there is a correlation between the comfort felt by occupants and the comfort estimated from biological information obtained by experiments to improve the ride quality of an ultra-compact vehicle. A single frequency in the vertical direction can help to estimate occupant comfort. However, we hypothesized that the study of a single frequency was insufficient. We oscillated the occupants with vibrations containing multiple vibration frequencies and obtained biometric information. The vibration frequency was set based on the difference in ride quality felt by humans. Biometric information was obtained using a cerebral hemodynamic meter and electrocardiogram. Acquiring multiple types of biometric information helps to more accurately estimate the psychological state. After the experiment, we obtained a subjective evaluation of comfort against vibrations using the visual analog scale (VAS). The biometric information obtained by the experiment was cluster-analyzed, and experimental participants with similar characteristics of the biometric information were grouped. Multiple regression analysis was performed based on the values of the typical biometric information of the cluster. Comfort was estimated from biometric information using multiple regression analysis. A correlation was confirmed between measured and estimated VAS scores.