Nurlan Dosmukhamedov

Nurlan Dosmukhamedov


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

3 September 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
NDNurlan Dosmukhamedov
Nurlan Dosmukhamedov
VKValery Kaplan
Valery Kaplan
EZErzhan Zholdasbay
Erzhan Zholdasbay
AAAidar Argyn
Aidar Argyn
EKErzhan Kuldeyev
Erzhan Kuldeyev
YTYeleussiz Bolatovich Tazhiyev
Yeleussiz Bolatovich Tazhiyev
New experimental results have been obtained on the behavior of arsenic and other associated metals (Re and others) under conditions of oxidative and reductive sintering. It has been established that the extraction of arsenic strongly depends on the process temperature during oxidative sintering. The extraction of arsenic into dust media at 873 K is 50% and rhenium is 88–90%. The effect of excess air on the extraction of arsenic and rhenium into dust was studied: the higher the excess air coefficient, the more complete the extraction of arsenic and rhenium into the dust. The obtained data indicate that achieving a high level of arsenic extraction from the initial product is not possible during oxidative sintering. The best arsenic removal results were reached under the conditions of reductive sintering of initial material by natural gas. The extraction of arsenic into dust at 823 K was 88%, and at 1373 K arsenic is almost completely converted into dust. Obtained new experimental results have a fundamental importance for the selection and organization of a comprehensive technology for the processing complex in composition refractory gold-copper-arsenic-bearing products.

16 August 2018 in JOM
Verified
Journal Article
Closed access
PDF file
NDNurlan Dosmukhamedov
Nurlan Dosmukhamedov
MEMaksut Egizekov
Maksut Egizekov
EZErzhan Zholdasbay
Erzhan Zholdasbay
VKValery Kaplan
Valery Kaplan

25 March 2020 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Verified
Journal Article
Closed access
NDNurlan Dosmukhamedov
Nurlan Dosmukhamedov
ЕZЕ.е. Zholdasbay
Е.е. Zholdasbay
An installation was developed and studies were carried out to determine the oxide solubility of copper, lead, arsenic, and antimony from copper-lead matte to slag under conditions of controlled values ​​of РО2=2,74*10-4 Pa and PS2=1,45*102 Pa, applicable to smelting reduction processes of copper-, lead-containing raw materials. It was found that the oxide solubility of copper from matte to slag increases monotonously with an increase of copper content in the matte. The presence of lead in the matte does not significantly affect the final solubility of copper in the slag. In a reducing atmosphere, the solubility of copper in slag is 0.28-0.35%, at the range of copper content of 30-45% in the matte, which is typical for industrial practice. The solubility of lead from copper-lead matte to slag has higher values ​​and increases to 1%. According to the results of mineralogical studies, there is no metallic form of arsenic in slags. Arsenic in slags was found in the form of oxide (As2O5) bound to silicate. Antimony in slag was found in oxide and metallic form. Moreover, the proportion of the last form in the slag prevails. It is shown that under reduction conditions the sublimation of arsenic and antimony from copper-lead matte is difficult. Equilibrium concentrations of As, Sb in the slag (0.17%) are achieved with their optimum content in the matte which is about 0.63%. Obtained results can be used to predict the loss of oxide solubility of copper and to develop optimal solutions to reduce the total loss of copper with slag during the reduction processes of separate processing of copper-, lead containing raw materials.

8 January 2020 in Ugol'
Verified
Journal Article
Closed access
NDNurlan Dosmukhamedov
Nurlan Dosmukhamedov
VKValery Kaplan
Valery Kaplan
GDG.S. Daruesh
G.S. Daruesh
?????? ?????, ???????? ??????????????, ???????? ???????, ????? ?????? ???????? ???????, ????? ?????? ???????? ??????????????, ??????, ??????, ??????, ?????? ???????, ?????? ?????????, ?????? ??????, ?????? ????????, ??????? ??????? ????, ??????????? ???????? ??????????????, ????????-??????????????, ????????? ??????, ???????? ??????, ??????? ?????????, ??????? ?????????????, ?????? ?????, ???????????? ????????????, ????????????????, ?????????, ????? ????, ??????????? ????, ???????? ????, ????????

30 June 2020 in Non-ferrous Metals
Verified
Journal Article
Closed access
NDNurlan Dosmukhamedov
Nurlan Dosmukhamedov
EZE. E. Zholdasbay
E. E. Zholdasbay
AAAidar Argyn
Aidar Argyn
AFA. N. Fedorov
A. N. Fedorov
The issues of smelting of difficult for treatment high-sulfur copper-zinc concentrate together with semiproducts and reverts of lead manufacture are considered. The possibility of direct extraction of copper, lead and zinc from copperzinc concentrate to target products in a one-stage process is substantiated. Presented are the results of laboratory meltings for coprocessing of lead semiproducts, reverts and copper-zinc concentrate at a temperature of 1250 °С under the melt bubbling conditions. High indexes of metal extraction into target products were achieved: copper into matte – up to 95% against 88.9% according to the existing technology; lead into lead bullion – up to 94% against 70.8% and zinc into slag – up to 95% compared to 83.7%. Extraction of arsenic and antimony into dust – 91 and 92.3% compared to 69.5% and 59.8%, respectively, which provides circumstances for their removal from the overall process chain of lead production. The use of the proposed solution in lead production will lessen the load on the environment; improve the process figures of the blast concentrating smelting process by reducing the loss of copper, lead with slag and high recovery of arsenic and antimony into dust. Compared to the existing technology, the consumption of coke and quartz flux is significantly reduced: from 6.7 to 2.5% and from 12.5 to 4.7% of the charge weight, respectively. The results of comelting of lead semiproducts and copper-zinc concentrate can form the basis for the development of a new manufacturing method.