Waste management is the first priority for many countries, so the focus of this research is on using waste materials in concrete as fillers and substituting concrete ingredients such as crumb rubber (CR) for fine aggregates. The utilization of waste rubber in concrete has gained attention recently, but CR substitution results in a reduction in mechanical and durability properties due to weak bonding and lower stiffness of CR. To overcome this issue, the addition of strength-increasing waste materials as cement substitutes is investigated along with CR (5%, 10%, and 15%) as fine aggregates and tested for the mechanical and durability behavior of concrete. Constant 10% waste glass powder (WGP) and 10% silica fume (SF) were substituted with cement in separate mixes. The main goal of this study is to investigate the suitable proportion of the materials from SF and WGP for enhancing rubberized concrete’s properties and to evaluate waste materials’ uses considering various parameters. The concrete is compared for both materials used as well as with control concrete and CR concrete for properties such as workability, compressive strength, tensile strength, density, ultrasonic pulse velocity, and dynamic modulus of elasticity. The reduction in compressive strength, tensile strength, workability, density, ultrasonic pulse velocity, and dynamic modulus of elasticity was observed due to the incorporation of CR, but also an increase in these properties with the incorporation of silica fumes (SF) and waste glass powder (WGP) as cement. It was observed that SF enhanced the properties of rubberized concrete better as compared to WGP. The 10% SF with 5% CR enhanced the compressive strength of rubberized concrete without SF by 11%. Similarly, 10% of WGP with 5% of CR enhanced the compressive strength of rubberized concrete by 6%.

Compressed stabilized earth blocks (CSEBs) offer a cheaper and environmentally sustainable alternative to traditional building materials for construction. In addition to addressing waste disposal difficulties, the inclusion of waste additives may improve the characteristics of compressed earth blocks (CEBs). This article attempts to outline the findings of researchers who have utilized the various manufacturing processes and investigated the influence of binders and fibers on the properties of CEBs. A systematic search of Web of Science and Scopus electronic databases for works on soil blocks published between 2012 and 2022 yielded 445 articles, while reports, case studies, conference papers, and non-English articles were omitted. Keywords such as “Soil blocks”, “Earth bricks”, and others were used to identify eligible studies. This study has been segmented into five sections, including a descriptive examination of articles and authors who have investigated soil blocks, a comparative analysis based on their manufacturing processes, and physical, mechanical, and durability aspects of the CSEBs, which were analyzed to determine the impact of additives. The PRISMA 2020 standards were followed in the evaluation of each record, which resulted in the identification of 61 articles that were pertinent to the study’s objective. The comparative analysis of the articles reveals that the binders were more significant in improving the compressive strength, cyclic wetting-drying and erosion (durability) aspects of the soil blocks, while fibers were effective in enhancing their flexural and thermal performance. The literature review indicates that if the minimum permissible limits are met, waste materials have the potential to partially replace the soil. In addition, this study suggests establishing standardized manufacturing norms and testing protocols to ascertain the quality and safety of CSEBs used in construction. However, this study is constrained by the limited databases used, governed by keywords, electronic resources and timeframe that could be used as research avenues in the future.

Mold breakout is one of the significant problems in a continuous casting machine (caster). It represents one of the key areas within the steel production facilities of a steel plant. A breakout event on a caster will always cause safety hazards, high repair costs, loss of production, and shutdown of the caster for a short while. In this paper, a logic-judgment-based mold breakout prediction system has been developed for a continuous casting machine. This system developed new algorithms to detect the different sticker behaviors. With more algorithms running, each algorithm is more specialized in the other behaviors of stickers. This new logic-based breakout prediction system (BOPS) not only detects sticker breakouts but also detects breakouts that takes place due to variations in casting speed, mold level fluctuation, and taper/mold problems. This system also finds the exact location of the breakout in the mold and reduces the number of false alarms. The task of the system is to recognize a sticker and prevent a breakout. Moreover, the breakout prediction system uses an online thermal map of the mold for process visualization and assisting breakout prediction. This is done by alerting the operating staff or automatically reducing the cast speed according to the location of alarmed thermocouples, the type of steel, the tundish temperature, and the size of the cold slab width. By applying the proposed model in an actual steel plant, field application results show that it could timely detect all 13 breakouts with a detection ratio of 100%, and the frequency of false alarms was less than 0.056% times/heat. It has the additional advantage of not needing a lot of learning data, as most neural networks do. Thus, this new logical BOPS system should not only detect the sticker breakouts but also detect breakouts taking place due to variations in casting speed and mold level fluctuation.

Unfired admixed soil blocks are made up of soil plus stabilizers such as binders, fibers, or a combination of both. Soil is abundant on Earth, and it has been used to provide shelter to millions of people. The manufacturing and usage of cement and cement blocks raise several environmental and economic challenges. Due to disposal issues, agricultural and industrial waste is currently the biggest hazard to the environment and humanity in the world. Consequently, environmental degradation brought on by agricultural waste harms the ecology. As a result, researchers are attempting to develop an alternative to cement blocks, and various tests on unfired admixed soil blocks have been done. This investigation uses agricultural waste (i.e., paddy straw fiber and sugarcane bagasse ash) and industrial waste (i.e., marble dust) in manufacturing unfired admixed soil blocks. Under this investigation, the applicability of unfired soil blocks admixed with marble dust, paddy straw fiber, and bagasse ash was studied. The marble dust level ranged from 25% to 35%, bagasse ash content ranged from 7.5% to 12.5%, and the content of paddy straw fiber ranged from 0.8% to 1.2% by soil dry weight. Various tests were conducted on the 81 mix designs of the prepared unfired admixed soil blocks to find out the physical properties of the block followed by modeling and optimization. The findings demonstrate that the suggested method is a superior alternative to burned bricks for improving the physical properties of admixed soil blocks without firing.