Ahmed Mohamed Hassan

Dr. Ahmed Mohamed Hassan

Future University in Egypt, Cairo, Al Qāhirah, Egypt

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Jawad AhmadJawad Ahmad
Jawad Ahmad
Karolos J. KontoleonKarolos J. Kontoleon
Karolos J. Kontoleon
AMAli Majdi
Ali Majdi
Muhammad Tayyab NaqashMuhammad Tayyab Naqash
Muhammad Tayyab Naqash
Ahmed Mohamed HassanAhmed Mohamed Hassan
Ahmed Mohamed Hassan
SQShaker M. A. Qaidi
Shaker M. A. Qaidi
In the last few decades, the concrete industry has been massively expanded with the adoption of various kinds of binding materials. As a substitute to cement and in an effort to relieve ecofriendly difficulties linked with cement creation, the utilization of industrial waste as cementitious material can sharply reduce the amount of trash disposed of in lakes and landfills. With respect to the mechanical properties, durability and thermal behavior, ground-granulated blast-furnace slag (GGBS) delineates a rational way to develop sustainable cement and concrete. Apart from environmental benefits, the replacement of cement by GGBS illustrates an adequate way to mitigate the economic impact. Although many researchers concentrate on utilizing GGBS in concrete production, knowledge is scattered, and additional research is needed to better understand relationships among a wide spectrum of key questions and to more accurately determine these preliminary findings. This work aims to shed some light on the scientific literature focusing on the use and effectiveness of GGBS as an alternative to cement. First and foremost, basic information on GGBS manufacturing and its physical, chemical and hydraulic activity and heat of hydration are thoroughly discussed. In a following step, fresh concrete properties, such as flowability and mechanical strength, are examined. Furthermore, the durability of concrete, such as density, permeability, acid resistance, carbonation depth and dry shrinkage, are also reviewed and interpreted. It can be deduced that the chemical structure of GGBS is parallel to that of cement, as it shows the creditability of being partially integrated and overall suggests an alternative to Ordinary Portland Cement (OPC). On the basis of such adjustments, the mechanical strength of concrete with GGBS has shown an increase, to a certain degree; however, the flowability of concrete has been reduced. In addition, the durability of concrete containing GGBS cement is shown to be superior. The optimum percentage of GGBS is an essential aspect of better performance. Previous studies have suggested different optimum percentages of GGBS varying from 10 to 20%, depending on the source of GGBS, concrete mix design and particle size of GGBS. Finally, the review also presents some basic process improvement tips for future generations to use GGBS in concrete.

SHSaimin Huang
Saimin Huang
HWHongchang Wang
Hongchang Wang
WAWaqas Ahmad
Waqas Ahmad
AAAyaz Ahmad
Ayaz Ahmad
Nikolai Ivanovich VatinNikolai Ivanovich Vatin
Nikolai Ivanovich Vatin
IMImran Mehmood
Imran Mehmood
Plastic consumption increases with the growing population worldwide and results in increased quantities of plastic waste. There are various plastic waste management strategies; however, the present management progress is not sustainable, and plastic waste dumping in landfills is still the most commonly employed strategy. Being nonbiodegradable, plastic waste dumping in landfills creates several environmental and human health problems. Numerous research studies have been conducted recently to determine safe and ecologically beneficial methods of plastic waste handling. This article performed a bibliographic analysis of the available literature on plastic waste management using a computational approach. The highly used keywords, most frequently cited papers and authors, actively participating countries, and sources of publications were analyzed during the bibliographic analysis. In addition, the various plastic waste management strategies and their environmental benefits have been discussed. It has been concluded that among the six plastic waste management techniques (landfills, recycling, pyrolysis, liquefaction, road construction and tar, and concrete production), road construction and tar and concrete production are the two most effective strategies. This is due to significant benefits, such as ease of localization, decreased greenhouse gas emissions, and increased durability and sustainability of manufactured materials, structures, and roadways. Conversely, using landfills is the most undesirable strategy because of the associated environmental and human health concerns. Recycling has equal benefits and drawbacks. In comparison, pyrolysis and liquefaction are favorable due to the production of char and fuel, but high energy requirements limit their benefits. Hence, the use of plastic waste for construction applications is recommended.

22 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
Jawad AhmadJawad Ahmad
Jawad Ahmad
Roberto Alonso Gonzalez-LezcanoRoberto Alonso Gonzalez-Lezcano
Roberto Alonso Gonzalez-Lezcano
AMAli Majdi
Ali Majdi
NKNabil Ben Kahla
Nabil Ben Kahla
Ahmed Mohamed HassanAhmed Mohamed Hassan
Ahmed Mohamed Hassan
M.A. El-ShorbagyM.A. El-Shorbagy
M.A. El-Shorbagy
Prior studies in the literature show promising results regarding the improvements in strength and durability of concrete upon incorporation of glass fibers into concrete formulations. However, the knowledge regarding glass fiber usage in concrete is scattered. Moreover, this makes it challenging to understand the behavior of glass fiber-reinforced concrete. Therefore, a detailed review is required on glass fiber-reinforced concrete. This paper provides a compressive analysis of glass fiber-reinforced composites. All-important properties of concrete such as flowability, compressive, flexural, tensile strength and modulus of elasticity were presented in this review article. Furthermore, durability aspects such as chloride ion penetration, water absorption, ultrasonic pulse velocity (UPV) and acid resistance were also considered. Finally, the bond strength of the fiber and cement paste was examined via scanning electron microscopy. Results indicate that glass fibers improved concrete’s strength and durability but decreased the concrete’s flowability. Higher glass fiber doses slightly decreased the mechanical performance of concrete due to lack of workability. The typical optimum dose is recommended at 2.0%. However, a higher dose of plasticizer was recommended for a higher dose of glass fiber (beyond 2.0%). The review also identifies research gaps that should be addressed in future studies.

5 July 2022 in Crystals
Verified
Journal Article
Open access
PDF file
Jawad AhmadJawad Ahmad
Jawad Ahmad
AMAli Majdi
Ali Majdi
AEAhmed Babeker Elhag
Ahmed Babeker Elhag
Ahmed Mohamed HassanAhmed Mohamed Hassan
Ahmed Mohamed Hassan
MSMahfooz Soomro
Mahfooz Soomro
SQShaker Qaidi
Shaker Qaidi
Plastics have become an essential part of our daily lives, and global plastic production has increased dramatically in the past 50 years. This has significantly increased the amount of plastic garbage produced. Researchers have recently been interested in using trash and recyclable plastics in concrete as an ecologically acceptable building material. A large number of publications have been published that describe the behavior of concrete, containing waste and recovered plastic com ponents. However, information is scattered, and no one knows how plastic trash behaves as concrete materials. This research examines the use of plastic waste (PW) as aggregate or fiber in cement mortar and concrete manufacturing. The article reviewed the three most significant features of concrete: fresh properties, mechanical strength, and durability. PW and cement connections were also studied using microstructure analysis (scan electronic microscopy). The results showed that PW, as a fiber, enhanced mechanical performance, but PW, as a coarse aggregate, impaired concrete performance owing to poor bonding. The assessment also identified research needs in order to enhance the performance of PW-based concrete in the future.

18 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
Jawad AhmadJawad Ahmad
Jawad Ahmad
AMAli Majdi
Ali Majdi
Amin Al-FakihAmin Al-Fakih
Amin Al-Fakih
Ahmed Mohamed HassanAhmed Mohamed Hassan
Ahmed Mohamed Hassan
FAFadi Althoey
Fadi Althoey
M.A. El-ShorbagyM.A. El-Shorbagy
M.A. El-Shorbagy
The push for sustainability in the construction sector has demanded the use of increasingly renewable resources. These natural fibers are biodegradable and non-toxic, and their mechanical capabilities are superior to those of synthetic fibers in terms of strength and durability. A lot of research recommends coconut fibers as an alternative to synthetic fibers. However, the knowledge is scattered, and no one can easily judge the suitability of coconut fibers in concrete. This paper presents a summary of research progress on coconut fiber (natural fibers) reinforced concrete. The effects of coconut fibers on the properties of concrete are reviewed. Factors affecting the fresh, hardened, and durability properties of concrete reinforced with coconut fiber are discussed. Results indicate that coconut fiber improved the mechanical performance of concrete due to crack prevention, similar to the synthetic fibers but decreased the flowability of concrete. However, coconut fibers improved flexure strength more effectively than compressive strength. Furthermore, improvement in some durability performance was also observed, but less information is available in this regard. Moreover, the optimum dose is an important parameter for high-strength concrete. The majority of researchers indicate that 3.0% coconut fiber is the optimum dose. The overall study demonstrates that coconut fibers have the creditability to be used in concrete instead of synthetic fibers.

1 June 2010 in Journal of Composites for Construction
Verified
Journal Article
Closed access
Ahmed Mohamed HassanAhmed Mohamed Hassan
Ahmed Mohamed Hassan
AGA. Ghobarah
A. Ghobarah
In several cases of loading and geometrical configurations, flexure beams, and girders are subjected to combined shear and torsion. Failure of a structural element under combined shear and torsion is brittle in nature. Externally bonded fiber-reinforced polymer (FRP) fabrics are currently being studied and used for the rehabilitation, repair, and retrofit of concrete structure. The objective of this study is to investigate the strengthening techniques for T-beams subjected to combined shear and torsion. Six half-scale beams—two control specimen and four strengthened beams—were constructed and tested using a specially designed test setup that subjects the beam to combined shear and torsion with different ratios. Four strengthening techniques using carbon FRPs were tested. The experimental results were reported and analyzed to assess the effectiveness of the proposed strengthening techniques. An innovative strengthening technique namely the extended U-jacket showed promising results in terms of strength and...