Electrical energy is important and had been demand increasingly. A lot of energy resources have been wasted and exhausted. An alternative way to generate electricity by using a population of human had been discovered When walking, the vibration that generates between the surface and the footstep is wasted. By utilizing this wasted energy, the electrical energy can be generated and fulfill the demand. The transducer that use to detect the vibration is a piezoelectric transducer. This transducer converts the mechanical energy into electrical energy. When the pressure from the footstep is applied to the piezoelectric transducer, it will convert the pressure or the force into the electrical energy. The piezoelectric transducer is connected in series-parallel coonection. Then, it is placed on the tile that been made from wood as a model for footstep tile to give pressure to the piezoelectric transducers. This tile can be placed in the crowded area, walking pavement or exercise instruments. The electric energy that generates from this piezoelectric tile can be power up low power appliances.
1 January 2010 in Progress In Electromagnetics Research
A Schottky diode has been designed and fabricated on an n-AlGaAs/GaAs high-electron-mobility-transistor (HEMT) structure. Current-voltage (I-V) measurements show good device rectification, with a Schottky barrier height of 0.4349 eV for Ni/Au metallization. The differences between the Schottky barrier height and the theoretical value (1.443 eV) are due to the fabrication process and smaller contact area. The RF signals up to 1 GHz are rectified well by the fabricated Schottky diode and a stable DC output voltage is obtained. The increment ratio of output voltage vs input power is 0.2 V/dBm for all tested frequencies, which is considered good enough for RF power detection. Power conversion efficiency up to 50% is obtained at frequency of 1 GHz and input power of 20 dBm with series connection between diode and load, which also shows the device’s good potential as a rectenna device with further improvement. The fabricated n-AlGaAs/GaAs Schottky diode thus provides a conduit for breakthrough designs for RF power detectors, as well as ultra-low power on-chip rectenna device technology to be integrated in nanosystems.
17 November 2009 in Superlattices and Microstructures
Soils are increasingly threatened by spillage of petroleum products such as petrol, diesel fuel, gasoline at oil refineries, underground storage tanks and pump stations pipelines. This study aims to investigate the effectiveness of Pseudomonas putida as oil-biodegradable agent in soil contaminated with diesel (D100). The effectiveness on bioremediation have been conducted by examined several physico-chemical tests on diesel-contaminated soil before and after seeding with P. putida. The spillage stimulation of D100 was conducted at laboratory scale for 24 days of incubation time. The results show that the bioremediation treatment able to remove up to 82%, 55%, 48%, and 34% of nitrogen, total organic carbon, phosphate, sulfate and, respectively. The pH of soil sample was changed from pH 7.8 (Day 0) to 6.78 (Day 24) after the treatment. Meanwhile, the moisture content in the sample has increased from 39% (Day 0) to 59% (Day 24). All of these results show the good indication of quality improvement of polluted soil after treated with P. putida. It is apparent from the acquired results that the application of P. putida is suitable as effective microorganism and potentially exploits as useful diesel-soil biodegradable agent in polluted soil.
The commercialization of biodiesel/diesel blends on the market can cause environmental damages due to spills. This study aims to investigate the effectiveness of Pseudomonas putida as oil-biodegradable agent in soil contaminated with biodiesel/diesel blend (B20). The effectiveness on bioremediation have been conducted by examined several physico-chemical tests on biodiesel/diesel-contaminated soil before and after seeding of P. putida. The spillage stimulation of B20 was conducted at laboratory scale for 24 days of incubation time. The results show that the bioremediation treatment able to remove up to 82%, 77%, 16%, and 10% of nitrogen, phosphate, sulfate and total organic carbon, respectively. The pH of soil sample was changed from pH 7.45 (Day 0) to 7.25 (Day 24) after the treatment. Meanwhile, the moisture content in the sample has increased from 44.11% (Day 0) to 50.35% (Day 24). All of these results show the good indication of quality improvement of polluted soil after treated with P. putida. It is apparent from the acquired results that the application of P. putida is suitable as effective microorganism and potentially exploits as useful oil-soil biodegradable agent in polluted soil.