Purpose: This review deals with the pros and cons of ultraviolet (UV) radiation on human beings and the role of textile clothing and the chemicals used for textiles to protect from their harmful effects.Design/methodology/approach: UV radiation (UVR) which has further divided into UVA, UVB, and UVC. Almost 100% of UVC and major portion of UVB are bounced back to stratosphere by ozone layer while UVA enters the earth atmosphere. Excessive exposure of solar or artificial UVR exhibit potential risks to human health. UVR is a major carcinogen and excessive exposure of solar radiation in sunlight can cause cancer in the lip, skin squamous cell, basal cell and cutaneous melanoma, particularly in people with the fair skin.Findings: This article aims to provide a comprehensive overview of the harmful effects of UVR on human skin, factors affecting UV irradiance and factors affecting UV protection offered by textile clothing.Originality/value: Effect of fiber properties, yarn properties, fabric construction, fabric treatments and laundering has been reviewed along with the identification of gaps in the reported research. A comparison of inorganic and organic UV absorbers has also been given along with different testing and evaluation methods for UV protective clothing.
The increasing demand of cotton and low production rate to fulfill the world requirements boosted the production of regenerated cellulose-based fibers. The purpose of this work was to compare the performance and comfort properties of regenerated cellulose fibers. For this purpose, cotton, viscose, modal, bamboo, and viscose fibers were taken. The pure blends of each fiber and 50:50 blends of modal blended with cotton fiber and regenerated fibers were taken. Normal yarn of count 20 tex was made and then plain woven fabrics were prepared. The warp-wise and weft-wise tensile and tear strengths were recorded. In addition, tests of air permeability, moisture management, thermal resistance test, and water vapor permeability were executed. It is found that the 100% modal fabrics give higher mechanical and comfort properties. In case of blends, modal:viscose (50:50) gives higher mechanical and comfort properties in woven fabrics.
18 June 2018 in Clothing and Textiles Research Journal
The worldwide growing need of cotton but its lower production has boosted the production of regenerated cellulosic fibers. This work compares the thermal comfort and mechanical properties of bamboo rayon fiber blends with cotton and other regenerated fibers. So, bamboo rayon fibers were blended with cotton, tencel lyocell, modal rayon, and viscose rayon. One-hundred-percent pure fabrics of bamboo rayon, cotton, tencel lyocell, modal rayon, and viscose rayon were made. Also, 50:50 blends of bamboo rayon with cotton, tencel lyocell, modal rayon, and viscose rayon were prepared. Plain-woven fabrics were made by using yarns of 20 tex. The thermal comfort and mechanical properties were analyzed. It is found that 100% tencel lyocell fabrics give higher mechanical and comfort properties. Similarly, bamboo rayon:tencel lyocell (50:50)–blended fabric gives better thermal comfort and mechanical properties than bamboo rayon:cotton–, bamboo rayon:modal rayon–, and bamboo rayon:viscose rayon–blended fabrics.
3 June 2019 in The Journal of the Textile Institute
Polylactic acid (PLA) and lyocell fibres blend can offer an eco-friendly alternative to commonly employed blend of polyethylene terephthalate (PET) and cotton fibres in textiles. PET fibre is non-biodegradable and depletes fossils fuels and adds to landfill sites whereas conventional cotton, dominant part of global cotton production, requires large quantity of water and pesticides during its production. In this study, 100% PLA, 100% lyocell and PLA-lyocell (PL) blended yarns, in varying ratios, were ring spun and subsequently weft knitted and compared with the PET/cotton blend (50/50). The yarns were evaluated for tensile properties while the fabrics were investigated for bursting strength, bending length, pilling propensity, water vapour resistance, thermal resistance and air permeability. The economic comparisons of the two blends were also included. The results indicated that comparatively PL blends (in particular lyocell fibre rich blends) can offer environmental and performance advantages compared to PC blended knitted fabrics for casual summer clothing and active wear.
5 March 2018 in International Journal of Clothing Science and Technology
Purpose: The purpose of this paper is to study the 100 percent pure cotton and 50:50 cotton and regenerated fibers (tencel, modal, bamboo, viscose) blends. The blends of regenerated fibers with cotton are studied so as to replace 100 percent cotton fabrics with the cotton blends as cotton cannot fulfill the demand of clothing due to the increasing population. Design/methodology/approach: In order to conduct this study, cotton, as natural cellulose fiber, was used. Regenerated fibers include viscose, tencel, modal and bamboo. Five yarn samples of Ne 30/1 of 100 percent cotton and blends (50:50) of cotton with tencel, modal, bamboo and viscose fibers were produced. The blending was done in the Blow-room, and yarn samples were produced by employing the ring spinning technique. Plain woven fabrics samples with Ends (76) and Picks (68) per inch of 120 gsm were prepared. The fabric samples were tested for mechanical (warp and weft tensile and tear strengths) and comfort properties (air permeability, moisture management and thermal resistance). Findings: Cotton:tencel fabric has the excellent mechanical (tensile and tear strength) as well as comfort properties (air permeability, moisture management and thermal resistance). It means that the most suitable blend that cotton can make with the regenerated fibers is the tencel. Therefore, to have more comfortable fabrics, the fabrics which are being made by 100 percent cotton can be replaced with the cotton:tencel. Originality/value: To the authors’ information, no study has been reported in which all the regenerated fibers blended with cotton were studied. Hence, the aim of this work is to study the mechanical and comfort properties of the regenerated fibers (modal, tencel, viscose and bamboo) blended with cotton. The blends of cotton with regenerated fibers might replace 100 percent cotton in clothing applications as cotton cannot fulfill the increasing demanding of clothing.
The use of shape memory polymer composites is growing rapidly in smart structure applications. In this work, an active asymmetric composite called “controlled behavior composite material (CBCM)” is used as shape memory polymer composite. The programming and the corresponding initial fixity of the composite structure is obtained during a bending test, by heating CBCM above thermal glass transition temperature of the used Epoxy polymer. The shape memory properties of these composites are investigated by a bending test. Three types of recoveries are conducted, two classical recovery tests: unconstrained recovery and constrained recovery, and a new test of partial recovery under load. During recovery, high recovery displacement and force are produced that enables the composite to perform strong two-way actuations along with multi-shape memory effect. The recovery force confirms full recovery with two-way actuation even under a high load. This unique property of CBCM is characterized by the recovered mechanical work.