Today, hydrogen is one of the best options for generating electrical energy, for both industrial and residential use. The greatest volume of hydrogen produced today derives from processes that utilize petroleum. Although hydrogen has numerous benefits, continuing to produce it by these means is undesirable. This document presents a review of the literature on biohydrogen production based on an analysis of over 15 types of terrestrial and marine biomasses. The fundamental components of different production systems are described, with a focus on the thermochemical processes of pyrolysis and gasification, which have been identified as two of the most effective, practical ways to produce hydrogen from biomass. It also discusses catalysts, solid residues, and residual water that are used in the thermochemical production of biohydrogen. The article ends with an analysis of hydrogen and its benefits as an energy option with great potential in the short term to participate in the transition from fossil fuels.

Today, energy use is an important and urgent issue for economic development worldwide. It is expected that raw material in the form of biomass and lignocellulosic residues will become increasingly significant sources of sustainable energy in the future because they contain components such as cellulose, hemicellulose, lignin, and extractables with high energy-producing potential. It is then essential to determine the behavior of these materials during thermal degradation processes, such as pyrolysis (total or partial absence of air/oxygen). Pyrolyzed biomass and its residual fractions can be processed to produce important chemical products, such as hydrogen gas (H₂). Thermogravimetric (TGA) analysis and its derivative, DTG, are analytical techniques used to determine weight loss as a function of temperature or time and associate changes with certain degradation and mass conversion processes in order to evaluate kinetic properties. Applying kinetic methods (mathematical models) to degradation processes permits obtaining several useful parameters for predicting the behavior of biomass during pyrolysis. Current differential (Friedman) and integral (Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, Starink, Popescu) models vary in their range of heating speeds (β) and degree of advance (α), but some (e.g., Kissinger’s) do not consider the behavior of α. This article analyzes the results of numerous kinetic studies using pyrolysis and based on thermogravimetric processes involving over 20 distinct biomasses. The main goal of those studies was to generate products with high added value, such as bio-char, methane, hydrogen, and biodiesel. This broad review identifies models and determines the potential of lignocellulosic materials for generating bioenergy cleanly and sustainably.

Pecan nut (Carya illinoensis) pericarp is usually considered as a waste, with no or low value applications. Its potential as a densified solid biofuel has been evaluated, searching for alternatives to generating quality renewable energy and reducing polluting emissions in the atmosphere, based on particle size, that is an important feedstock property. Therefore, agro-industrial residues from the pecan nut harvest were collected, milled and sieved to four different granulometry: 1.6 mm (N° 12), 0.84 mm (N° 20), 0.42 mm (N° 40), and 0.25 mm (N° 60), used as raw material for biofuel briquette production. The carbon and oxygen functional groups in the base material were investigated by Fourier transform infrared spectroscopy (FTIR) and proximate analyses were performed following international standards, for determining the moisture content, volatile materials, fixed carbon, ash content, and calorific value. For the biofuel briquettes made from base material of different particle sizes, the physical characteristics (density, hardness, swelling, and impact resistance index) and energy potential (calorific value) were determined to define their quality as a biofuel. The physical transformation of the pecan pericarp wastes into briquettes improved its quality as a solid biofuel, with calorific values from around 17.00 MJ/kg for the base material to around 18.00 MJ/kg for briquettes, regardless of particle size. Briquettes from sieve number 40 had the highest density (1.25 g/cm³). Briquettes from sieve number 60 (finest particles) presented the greater hardness (99.85). The greatest susceptibility to swelling (0.31) was registered for briquettes with the largest particle size (sieve number 20). The IRI was 200 for all treatments.

This proposal evaluates the energy potential of agricultural residues of Zea mays from an indigenous community in Mexico. The study consists of four stages: (a) evaluation of residue production in all community farming areas (b) morphological and physicochemical characterization, using scanning electron microscopy (SEM), as well as infrared spectroscopy (FTIR) and Raman (c) the proximal and functional evaluation of the residues, through fiber analysis, determination of fixed carbon, humidity, estimation of calorific value, ash microanalysis and elemental analysis, and (d) evaluation of energy potential and multicriteria analysis. The results show that Z. mays residues have initial moisture values of less than 10%, ash content below 20%, fixed carbon around 14% and a calorific value of 17.6 MJ/kg associated with polymeric compounds and carbohydrates, as well as a percentage of extractable compounds of the order of 40%. The production of these residues on the 249 hectares (ha) of cultivation used would generate 23 TJ/year, whereas if the total number of hectares available were cultivated, the total energy generation would be 330 TJ/year, which is enough to satisfy the wood fuel demand of approximately seven communities with the characteristics of the study community. Due to this potential, as well as the results of the characterization, the agricultural mentioned residues are an energy alternative to meet the energy demand in communities in Michoacán, Mexico.

This study shows the energy potential of pine wood waste for the production of solid biofuels, and was carried out in an indigenous community in the state of Michoacán. One of the main economic activities of this community is the production of handcrafted furniture, which generates a large amount of wood waste. The most relevant results obtained in this research show that the community generates approximately 2268 kg of sawdust and 5418 kg of shavings per week, and the estimated energy potential per year for both sawdust is 1.94 PJ and for shaving is 4.65 PJ. Based on the particle size observed, the wood residue can be used to generate pellets or briquettes. Other average results in sawdust and (shavings) are the following: initial moisture content 15.3% (16.8%), apparent density 169.23 kg/m³ (49.25 kg/m³), ash 0.43% (0.42%), volatile material 84.9% (83.60%), fixed carbon 14.65% (15.96%), hemicelluloses 12.89% (10.68%), cellulose 52.68% (52.82%), lignin 26.73% (25.98%), extractives 7.69% (10.51%), calorific value 17.6 MJ/kg (17.9 MJ/kg). The major chemical elements in the ash were Al, K. Fe, Ca, P, Na, and Mg. Finally, the results obtained indicate that this biomass can be used to generate pellets or briquettes in this indigenous community.

Diverse methodologies exist to determine the chemical composition, proximate analysis, and calorific value of biomass. Researchers select and apply a specific methodology according to the lignocellulosic material they study and the budgetary resources available. In this project, we determined the primary chemical constitution and proximate analysis of Prosopis laevigata (Humb. & Bonpl.) Jonhst wood using a traditional chemical method and a novel procedure based on the deconvolution of the DTG signal produced by TGA. The highest calorific value was verified using a calorimetric pump based on mathematical models. We also conducted elemental analysis and a microanalysis of ash, and applied Fourier transform infrared spectroscopic analysis (FT-IR). The means of the results obtained by the chemical method and TGA-DTG, respectively, were: hemicelluloses 7.36%–(8.72%), cellulose 48.28%–(46.08%), lignin 30.57%–(32.44%), extractables 13.53%–(12.72%), moisture 2.03%–(4.96%), ash 1.77%–(1.90%), volatile matter 75.16%–(74.14%), and fixed carbon 23.05%–(18.93%). The procedure with the calorimetric pump generated a calorific value above 20.16 MJ/kg. The range generated by the various models was 18.23–21.07 MJ/kg. The results of the elemental analysis were: carbon 46.4%, hydrogen 6.79%, oxygen 46.43%, nitrogen 0.3%, and sulfur 0.5%. The microanalysis of ash identified 18 elements. The most abundant ones were potassium ˃ calcium ˃ sodium. Based on the infrared spectrum (FT-IR) of Prosopis laevigata wood, we detected the following functional groups: OH, C-H, C=O, CH_2, CH₃, C-O-C, C-OH, and C4-OH. Our conclusion is that the TGA-DTG method made it possible to obtain results in less time with no need for the numerous reagents that chemical procedures require. The calorific value of P. laevigata wood is higher than the standards. Finally, according to our results, proximate analysis provides the best model for calculating calorific value.