Incinerated Bio-Medical Waste Ash (IBWA) is toxic waste material with broad potential (cancer, genetic risk, premature death, permanent disease) to inflict severe health damage for the atmosphere and humans. This waste is disposed of as landfill, which contaminates the underground water and environment. The effective way of disposal of IBWA is by utilizing it as a building material, which can reduce the hazardous toxic materials. The use of Geopolymer Concrete (GPC) combined with IBWA as a substitute for Ground Granulated Blast Furnace Slag (GGBS) has been researched for its ability to create a new type of Green Concrete. The physical and chemical properties were observed for the raw materials. IBWA was used at 0, 5, 10, 15, 20, 25, 30, 35, 40, 45 and 50% replacement by weight for GGBS. Mixing proportions were 1:2.21:3.48 respectively for GGBS, Manufacturing Sand (M-sand), and coarse aggregate. Fresh properties and mechanical properties were examined for all specimens. The findings show an increase in the setting time and flow of concrete and a decrease in density with improved utilization of IBWA. On the other hand, IBWA replacement for GGBS enhanced the mechanical properties. These results revealed that IBWA could be partially replaced as source material for Geopolymer Concrete. This research may contribute to the reduction of dangerous IBWA as a building material.
11 November 2021 in Innovative Infrastructure Solutions
An extensive experimental study was implemented to investigate the structural and material properties of Waste Glass Powder (WGP) as fine aggregate in Incinerated Bio-Medical Waste Ash (IBWA) – Ground Granulated Blast Furnace Slag (GGBFS) based Geopolymer Concrete (GPC). The research was based on the compressive, splitting tensile and flexural efficiency of GGBS-based geopolymer concrete mixed with IBWA as binder and WGP as fine aggregate. To determine the concrete strength, four different types of proportions were designed as beams and columns. The mechanical properties such as compressive strength and splitting tensile strength and flexural properties for beams such as deflection, ductility factor, flexural strength, and toughness index, and flexural properties for columns such as load-carrying capacity, stress-strain behaviour, and load-deflection behaviours were calculated. Comparative analyzes were performed to assess the efficiency of Waste Glass Powder and Incinerated Biomedical Waste Ash in GGBS-based geopolymer concrete against Reinforced Cement Concrete (RCC). The findings showed that the Waste Glass Powder and Incinerated Bio-Medical Waste Ash embedded in GGBS-based Geopolymer concrete exhibited the highest fracture energy, as predicted from the mechanical bond between the waste materials and the GGBS-based Geopolymer concrete.
1 January 2022 in Research on Engineering Structures and Materials