MUTHUKANNAN MARIMUTHU

Dr. MUTHUKANNAN MARIMUTHU


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 September 2019 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
AGA. Chithambar Ganesh
A. Chithambar Ganesh
MMMUTHUKANNAN MARIMUTHU
MUTHUKANNAN MARIMUTHU
Ramalingam MalathyRamalingam Malathy
Ramalingam Malathy
RCRamesh Babu Chokkalingam
Ramesh Babu Chokkalingam
This paper presents the experimental results of self-healing efficiency of two different bacteria namely Bacillus sphaericus and Bacillus subtilis incorporated in with polypropylene fibre reinforced concrete. Concrete was prepared with an optimum amount of polypropylene fibre and cultured bacteria. The artificial cracks were formed in the concrete to perform this investigation. The cracked concrete was observed at constant intervals. The effectiveness of self-healing was evaluated by the mechanical test over the bacterial concrete with fibre (BCF). The results obtained from the mechanical study show that the BCF produced commendable results. The precipitation characteristic analysis was carried out by SEM and XRD diffractogram analysis was performed to confirm the precipitation in BCF. The analysis shows that there is a presence of sufficient self-healing compound in cracked concrete. The effectiveness of the developed BCF concrete in regaining strength shows a substantial increase in strength after self-healing therefore, the effectiveness of self-healing of BCF is admirable.

12 November 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
AGA. Chithambar Ganesh
A. Chithambar Ganesh
MMMUTHUKANNAN MARIMUTHU
MUTHUKANNAN MARIMUTHU
Recent studies have shown that Geopolymer concrete is one of the emerging building materials worldwide. Various studies have been conducted on the Geopolymer concrete and the engineering properties of the material have been improved drastically. Geopolymer concrete is found to be comparatively brittle than the ordinary conventional concrete. To counteract this effect fibers are incorporated in to the Geopolymer concrete. In this research work, glass fibers and polypropylene fibers are added to the Geopolymer concrete in various proportions and its influence was studied over the fresh and hardened properties of concrete such as workability, compressive strength, split tensile strength, flexural strength and ductility factor. The Geopolymer concrete in this study is GGBS based as it involves ambient curing. The various materials were proportioned based on the Rangans mix design. Fair results have been obtained in the study and it was found that the brittleness could be controlled in the Geopolymer concrete by appropriate proportioning of fiber.

6 June 2019 in International Journal for Quality Research
Verified
Journal Article
Closed access
MMMUTHUKANNAN MARIMUTHU
MUTHUKANNAN MARIMUTHU
AGAruna Sankar Chithambar Ganesh
Aruna Sankar Chithambar Ganesh

25 January 2017 in Computers & concrete
Verified
Journal Article
Closed access
MVM. Vinodkumar
M. Vinodkumar
MMMUTHUKANNAN MARIMUTHU
MUTHUKANNAN MARIMUTHU
Structural behaviour of HFRC beams retrofitted for shear using GFRP laminates shear behavior;glass fibre reinforced polymer (GFRP) laminates;steel;glass and polypropylene fibres; This paper summarizes the experimental study of the shear behaviour of Hybrid Fibre Reinforced Concrete (HFRC) beams retrofitted by using externally bonded Glass Fibre Reinforced Polymer (GFRP) laminates. To attain the set-out objectives of the present investigation, steel fibre of 1% and polypropylene fibre of 0.30% was used for hybrid steel-polypropylene fibre reinforced concrete: whereas for hybrid glass-polypropylene fibre reinforced concrete, glass fibre by 0.03% and polypropylene fibre of 0.03% by volume of concrete was used. In this study, 9 numbers of beams were cast and tested into three groups (Group I, II & III). Each group containing 3 numbers of beams, out of which one serve as a control beam or a hybrid steel-polypropylene fibre reinforced concrete beam or a hybrid glass - polypropylene fibre reinforced concrete beam and the remaining two beams were preloaded until shear cracks appeared up to 75% of ultimate load and then preloaded beams (damaged beams) were retrofitted with GFRP laminates at shear zone in the form of strips, as one beam in vertical position and another beam in inclined position to restrict the shear cracks. Finally, the retrofitted beams were loaded until failure and test results were compared. The experimental tests have been conducted to investigate various parameters of structural performance, such as load carrying capacity, crack pattern and failure modes, load-deflection responses and ductility relations. The test results revealed that beams retrofitted using GFRP laminates considerably increased the load carrying capacity. In addition, it was found that beams retrofitted with inclined strip offers superior performance than vertical one. Comparing the test results, it was observed that hybrid steel-polypropylene fibre reinforced concrete beam retrofitted with GFRP laminates showed enhanced behaviour as compared to other tested beams.


1 January 2021 in Research on Engineering Structures and Materials
Verified
Journal Article
Closed access
PDF file
KAKadarkarai Arunkumar
Kadarkarai Arunkumar
MMMUTHUKANNAN MARIMUTHU
MUTHUKANNAN MARIMUTHU
AKA. Suresh Kumar
A. Suresh Kumar
AGA. Chithambar Ganesh
A. Chithambar Ganesh
KDKanniga Devi
Kanniga Devi