This paper presents the experimental results of self-healing efficiency of two different bacteria namely Bacillus sphaericus and Bacillus subtilis incorporated in with polypropylene fibre reinforced concrete. Concrete was prepared with an optimum amount of polypropylene fibre and cultured bacteria. The artificial cracks were formed in the concrete to perform this investigation. The cracked concrete was observed at constant intervals. The effectiveness of self-healing was evaluated by the mechanical test over the bacterial concrete with fibre (BCF). The results obtained from the mechanical study show that the BCF produced commendable results. The precipitation characteristic analysis was carried out by SEM and XRD diffractogram analysis was performed to confirm the precipitation in BCF. The analysis shows that there is a presence of sufficient self-healing compound in cracked concrete. The effectiveness of the developed BCF concrete in regaining strength shows a substantial increase in strength after self-healing therefore, the effectiveness of self-healing of BCF is admirable.
27 June 2020 in IOP Conference Series: Materials Science and Engineering
The effect of bacterial and fiber combination to enhance the properties of GGBS based geopolymer concrete to be used as paver block is investigated in this study. In this study, Bacterial combinations such as Bacillus Subtillis and Bacillus Sphaericus and high modulus glass fibers and low modulus polypropylene fibers were incorporated to produce hybrid fiber reinforced bacterial geopolymer concrete with increased energy absorption characteristics and better post cracking behavior under heavy loads. Combined and the discrete performance of bacteria and fiber over the mechanical properties of the geopolymer concrete were investigated. The influence of bacterial strain combination over self-healing of concrete is also studied by inducing artificial cracks of 1mm over concrete. The self-healed products were subjected to microstructural investigation such as SEM analysis and XRD analysis to understand the microstructure of precipitated products and the bio- remedial action exhibited by the bacteria. Finally, the paver blocks were produced for the optimum specimens of geopolymer concrete along with fiber and bacteria and its performance over compressive, split tensile, flexural and water absorption characteristics were assessed to determine its adaptability to sustain loading under heavy and very heavy traffic conditions as per Indian Standard 15658 (2006). This research work lays a path for the sustainable development of production of eco-friendly self-healing high strength paver blocks.
12 November 2019 in IOP Conference Series: Materials Science and Engineering
Recent studies have shown that Geopolymer concrete is one of the emerging building materials worldwide. Various studies have been conducted on the Geopolymer concrete and the engineering properties of the material have been improved drastically. Geopolymer concrete is found to be comparatively brittle than the ordinary conventional concrete. To counteract this effect fibers are incorporated in to the Geopolymer concrete. In this research work, glass fibers and polypropylene fibers are added to the Geopolymer concrete in various proportions and its influence was studied over the fresh and hardened properties of concrete such as workability, compressive strength, split tensile strength, flexural strength and ductility factor. The Geopolymer concrete in this study is GGBS based as it involves ambient curing. The various materials were proportioned based on the Rangans mix design. Fair results have been obtained in the study and it was found that the brittleness could be controlled in the Geopolymer concrete by appropriate proportioning of fiber.