Using unmanned aerial vehicles (UAVs) for bridge inspection is becoming increasingly popular due to its ability to improve efficiency and ensure the safety of monitoring personnel. Compared to traditional manual monitoring methods, UAV inspections are a safer and more efficient alternative. This paper examines the impact of meteorological conditions on UAV-based bridge monitoring during specific tasks, with the aim of enhancing the safety of the UAV’s costly components. The wake vortex behind a bridge structure can vary over time due to airflow, which can have a direct impact on the safety of UAV flights. To assess this impact, numerical analysis is conducted based on monitoring requirements specific to different tasks, taking into account wind speed, wind direction, and air temperature. In order to optimize UAV trajectory, it is important to consider the wake vortex intensity and its associated influence region, which can pose a potential danger to UAV flight. Additionally, the analysis should take into account the aerodynamic effects of different types of bridge columns on the wake vortex. An optimization algorithm was utilized to optimize the trajectory of a UAV during bridge inspections within the safe region affected by wind fields. This resulted in the determination of an effective and safe flight path. The study reveals that varying wind speeds have an impact on the safe flight zone of UAVs, even if they are below the operational requirements. Therefore, when monitoring bridges using UAVs, it is important to take into account the influence of meteorological conditions. Furthermore, it was observed that the flight path of UAVs during square cylinder column monitoring is longer and more time-consuming than round cylinder column monitoring. Determining an effective UAV inspection path is crucial for completing bridge monitoring tasks in windy conditions, establishing bridge inspection standards, and developing the Intelligent Bridge Inspection System (IBIS).
This paper presents a new concept of the control strategy in prevention program for the airlines to prevent the injuries of passengers and crew members for transport aircraft. A twin-jet transport aircraft encountered severe clear-air turbulence at transonic flight in descending phase is the study case of the present paper. The nonlinear and unsteady flight controllability models based on flight data mining and the fuzzy-logic modeling of artificial intelligence technique, are utilised to support this new concept. The proposed flight controllability models with the function of nonlinear dynamic inversion are employed to provide flight control strategy through flight simulations of dynamic inversion process; it is an innovation in mathematical modelling of aerospace engineering. Since the sudden plunging motion with the abrupt change in attitude and gravitational acceleration (i.e. the normal load factor) to affect the flight safety the most, hazard mitigation is a great concern for the aviation community. The present study is initiated to examine possible mitigation concepts of accident prevention to provide a training course for loss of control in-flight program to the airlines.
Flight simulation training is one of the most important methods in early-stage civil aviation flight training. In this regard, flight simulation competitions are effective tools for evaluating the flight skills of trainees. In this study, a model is developed for evaluating the flight skills of trainees by integrating GBDT (Gradient Boosting Decision Tree), PSO (Particle Swarm Optimization), and CNNs (Convolutional Neural Networks). Flight data from simulations is employed for model training. Initially, performance data and scores are gathered from a simulated flight competition platform. The GBDT algorithm is then applied to filter and identify essential flight parameters from the collected data. Subsequently, the PSO-CNN model is utilized to train on the extracted flight parameters. The proposed GBDT-PSO-CNN model achieves a recognition rate of 93.8% on the test dataset. This assessment system is of significant importance for improving the specific maneuvering skill level of flight trainees.
6 January 2018 in Advances in Mechanical Engineering
In order to precisely measure water impact loads of a spherical structure vertically dropping onto a calm water surface, a new validity check of the analysis using the levitation mass method experiment is proposed. The main feature of levitation mass method experiment is to obtain a better estimation of early water impact loads through the application of Doppler effect. Experimental results of different heights are verified based on the Assessment Index and are in comparison with the classical experimental data for validation purpose. It shows that the levitation mass method measurement is useful and effective to obtain the water impact loads for the crashworthiness analysis. Besides, early water impact hydrodynamic behaviors are simulated based on the nonlinear explicit finite element method, together with application of a multi-material arbitrary Lagrangian–Eulerian solver. A penalty coupling algorithm is utilized to realize fluid–structure interaction between the spherical body and fluids. Convergence studies are performed to construct the proper finite element model by the comparison with experimental results, where mesh sensitivity, contact stiffness, and time-step size parametric studies are thoroughly investigated. The comparisons between experimental and numerical results show good consistency by the prediction of the water impact coefficients on the structure.
The main objective of this article is to present a training program of loss control prevention for the airlines to enhance aviation safety and operational efficiency. The assessments of dynamic stability characteristics based on the approaches of oscillatory motion and eigenvalue motion modes for jet transport aircraft response to sudden plunging motions are demonstrated in this article. A twin-jet transport aircraft encountering severe clear-air turbulence in transonic flight during the descending phase will be examined as the study case. The flight results in sudden plunging motions with abrupt changes in attitude and gravitational acceleration (i.e. the normal load factor). Development of the required thrust and aerodynamic models with the flight data mining and the fuzzy-logic modeling techniques will be presented. The oscillatory derivatives extracted from these aerodynamic models are then used in the study of variations in stability characteristics during the sudden plunging motion. The fuzzy-logic aerodynamic models are utilized to estimate the nonlinear unsteady aerodynamics while performing numerical integration of flight dynamic equations. The eigenvalues of all motion modes are obtained during time integration. The present quantitative assessment method is an innovation to examine possible mitigation concepts of accident prevention and promote the understanding of aerodynamic responses of the jet transport aircraft.