As 3D acquisition equipment picks up steam, point cloud registration has been applied in ever-increasing fields. This paper provides an exhaustive survey of the field of point cloud registration for laser scanners and examines its application in large-scale aircraft measurement. We first researched the existing representative point cloud registration algorithms, such as hierarchical optimization, stochastic and probability distribution, and feature-based methods, for analysis. These methods encompass as many point cloud registration algorithms as possible; typical algorithms of each method are suggested respectively, and their strengths and weaknesses are compared. Lastly, the application of point cloud registration algorithms in large-scale aircraft measurement is introduced. We discovered that despite the significant progress of point cloud registration combining deep learning and traditional methods, it is still difficult to meet realistic needs, and the main challenges are in the direction of robustness and generalization. Furthermore, it is impossible to extract accurate and comparable features for alignment from large-scale aircraft surfaces due to their relative smoothness, lack of obvious features, and abundance of point clouds. It is necessary to develop lightweight and effective dedicated algorithms for particular application scenarios. As a result, with the development of point cloud registration technology and the deepening into the aerospace field, the particularity of the aircraft shape and structure poses higher challenges to point cloud registration technology.
12 November 2020 in Journal of Advanced Transportation
Cognitive load is generated by pilots in the process of information cognition about aircraft control, and it is closely related to flight safety. Cognitive load is the physiological and psychological need that a pilot produces when completing a mission. Therefore, it is meaningful to study the dynamic identification of the cognitive load of the pilot under the complex human-aircraft-environment interaction. In this paper, the airfield traffic pattern flight simulation experiment was designed and used to obtain the ECG physiological and NASA-TLX psychological data. The wavelet transform preprocessing and mathematical statistics analysis were applied on them, respectively. Furthermore, the Pearson correlation analysis method is used to select the characteristic indicators of psycho-physiological data after preprocessing. Based on the psycho-physiological characteristic indicators, the pilot’s cognitive load identification model is constructed by combining RNN and LSTM. The results of this study are more accurate compared with the cognitive load identification models established by other methods such as RNN neural network and support vector machine. This research is able to provide a useful reference for preventing and reduction of human error caused by the cognitive load during flight missions. It will be potential to realize intelligent control of aircraft cockpit, improving the flight control behavior and maintaining flight safety.
In this paper, to better evaluate the flight performance of pilot cadets, a flight performance evaluation index system was constructed based on the task of the traffic pattern, the flight training manual, and interviews with instructors. The fuzzy comprehensive evaluation model established by the G1 method was used to evaluate the flight performance of pilot cadets. The flight data of 30 flight cadets were collected to verify the applicability of the fuzzy comprehensive evaluation model. The results showed that the index system established in this paper can meet the requirements of flight performance evaluation. In addition, the fuzzy comprehensive evaluation results were consistent with the evaluation results of experts. Therefore, the system is effective and feasible for the evaluation of pilot cadets’ flight performance through the fuzzy comprehensive evaluation model established by the index system and G1 method.
In today’s world, energy is undoubtedly one of the most significant problems. As the global electricity consumption continues to increase, electric motors, which are widely used as power devices, account for an increasingly prominent proportion of the energy consumed. Motors now consume about 45% of the total electricity in the world (60% in China); therefore, improving motor efficiency has become an important way to achieve carbon emission reduction and sustainable development. The aim of this research was to devise a new strategy to reduce CO2 emissions other than by building green power factories, because even the building of green power factories produces a great deal of CO2 emissions, and improving motor efficiency to reduce CO2 emissions could contribute to sustainable development worldwide. However, the improvement of motor efficiency encounters challenges, such as nonlinearity and disturbances, which affect the motor performance and energy efficiency. To address this issue, this paper proposes a control algorithm for permanent-magnet synchronous motors (PMSMs) that is highly efficient and would be most widely used based on a fuzzy control adaptive forgetting factor. It aims to enhance the efficiency and accuracy of the online parameter estimation for the PMSM flux linkage, thereby achieving more precise and energy-efficient motor control. Firstly, the recursive least-squares parameter estimation algorithm is used to identify the parameters of the PMSM. This ensures that the parameter estimation values can be dynamically updated with data changes, adapting to the time-varying parameters. Secondly, the Padé approximation method is adopted, which is a method that does not depend on the motor hardware, to improve the accuracy of the linearized model of the motor. Finally, a control algorithm based on the fuzzy control adaptive forgetting factor algorithm is constructed on a physical experimental platform. A comparison of these results proves that the control technology under this algorithm provides a new energy-saving control strategy that can estimate the motor flux linkage parameters more accurately, help to reduce energy consumption, promote the use of clean energy, and achieve sustainable performance optimization.
Due to the perilous conditions in coal mine accidents, trapped people need to be rescued as soon as possible. The danger and complexity of this environment have brought great difficulties for search and rescue. The emergence of rescue robots has addressed this problem, and the improvement of their search-and-rescue ability is a key concern for rescue robot designers. Based on previous experience of a tracked mobile robot, this paper proposes a new solution via the addition of adjustive rocker arms. For this purpose, a hydraulic unit is installed between the rocker arms and the robot, which enables the rocker arms to be pulled back and forth, enabling its adaptation to more complex environments. In addition, based on kinematics equations, by analyzing the motion rules and characteristics of climbing typical obstacles including stairs, grooves, and lug steps, the present research not only works out the centroid coordinates but also explores the maximal obstacle height. The results show that when the rocker arms are extended by hydraulic pressure, the obstacle-climbing height of the robot increases 16.7 percent. This demonstrates the improvement in obstacle climbing ability and rescue efficiency in complex environments.
14 March 2020 in International Journal of Aerospace Engineering
The physiological, psychological, and physical characteristics of the pilot will have an impact on flight safety, mainly in the pilot’s intention. In another word, this means the pilot’s psychological experience of flight status under the influence of various factors and the preference for decision-making or behavioral value that is displayed. The pilot’s intention is to reflect the cognitive state that the pilot showed during the maneuvering of the aircraft. The exploration of intention is very important for the study of automatic pilot and flight control active safety system. Also, it is an important concept often involved in the study of human factors in flight, especially the microbehavior of pilots. Pilot’s intention is taken as the study object in this paper; physiological-psychological-physical parameters are obtained through analyzing their influencing factors from the simulating flight experiments designed. The random forest analysis method is used to rank the main influencing factors affecting the pilot’s intention, and the factor sequence is formed. The results provide a good foundation for further research on the pilot’s intention identification.
About Me
Si Haiqing is an expert in general aviation and mechanical energy optimization.
Si Haiqing is an expert in general aviation and mechanical energy optimization.