The study aims to synthesize two green pyrazole compounds, N-((1H-pyrazol-1-yl)methyl)-4-nitroaniline (L4) and ethyl 5-methyl-1-(((4-nitrophenyl)amino)methyl)-1H-pyrazole-3-carboxylate (L6), and test their action as corrosion inhibitors for carbon steel (CS) in a 1 M HCl solution. Both chemical and electrochemical methods, namely, gravimetric measurements (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS), were used to assess the efficiency of the investigated molecules. DFT calculations at B3LYP/6-31++G (d, p) and molecular dynamics simulation were used to carry out quantum chemical calculations in order to link their electronic characteristics with the findings of experiments. The organic products exhibited good anticorrosion ability, with maximum inhibition efficiencies (IE %) of 91.8 and 90.8% for 10^-3 M L6 and L4, respectively. In accordance with PDP outcomes, L6 and L4 inhibitors act as mixed-type inhibitors. Assessment of the temperature influence evinces that both L4 and L6 are chemisorbed on CS. The adsorption of L4 and L6 on CS appears to follow the Langmuir isotherm. Scanning electron microscopy and UV-visible disclose the constitution of a barrier layer, limiting the accessibility of corrosive species to the CS surface. Theoretical studies were performed to support the results derived from experimental techniques (WL, PDP, and EIS).

Agro-waste management processes are evolving through the development of novel experimental approaches to understand the mechanisms in reducing their pollution levels efficiently and economically from industrial effluents. Agro-industrial effluent (AIE) from biorefineries that contain high concentrations of COD and color are discharged into the ecosystem. Thus, the AIE from these biorefineries requires treatment prior to discharge. Therefore, the effectiveness of a continuous flow bioreactor system (CFBS) in the treatment of AIE using hybrid waste sludge biochar (HWSB) was investigated. The use of a bioreactor with hydraulic retention time (HRT) of 1–3 days and AIE concentrations of 10–50% was used in experiments based on a statistical design. AIE concentration and HRT were optimized using response surface methodology (RSM) as the process variables. The performance of CFBS was analyzed in terms of COD and color removal. Findings indicated 76.52% and 66.97% reduction in COD and color, respectively. During biokinetic studies, the modified Stover models were found to be perfectly suited for the observed measurements with R² values 0.9741 attained for COD. Maximum contaminants elimination was attained at 30% AIE and 2-day HRT. Thus, this study proves that the HWSB made from biomass waste can potentially help preserve nonrenewable resources and promote zero-waste attainment and principles of circular economy.

A nickel-vanadium-based bimetallic precursor was produced using the polymerization process by urea-formaldehyde copolymers. The precursor was then calcined at 800 °C in an argon ambiance to form a Ni₃V₂O₈-NC magnetic nanocomposite. Powerful techniques were used to study the physical characteristics and chemical composition of the fabricated Ni₃V₂O₈-NC electrode. PXRD, Raman, and FTIR analyses proved that the crystal structure of Ni₃V₂O₈-NC included N-doped graphitic carbon. FESEM and TEM analyses imaging showed the distribution of the Ni₃V₂O₈ nanoparticles on the layered graphitic carbon structure. TEM images showed the prepared sample has a particle size of around 10–15 nm with an enhanced active site area of 146 m²/g, as demonstrated by BET analysis. Ni₃V₂O₈-NC nanocomposite exhibits magnetic behaviors and a magnetization saturation value of 35.99 emu/g. The electrochemical (EC) studies of the synthesized Ni₃V₂O₈-NC electrode proceeded in an EC workstation of three-electrode. In a 5 M potassium hydroxide as an electrolyte, the cyclic voltmeter exhibited an enhanced capacitance (C_S) of 915 F/g at 50 mV/s. Galvanic charge-discharge (GCD) study also exhibited a superior capacitive improvement of 1045 F/g at a current density (I_t) of 10 A/g. Moreover, the fabricated Ni₃V₂O₈-NC nanocomposite displays a good power density (P_t) of 356.67 W/kg, improved ion accessibility, and substantial charge storage. At the high energy density (E_t) of 67.34 W h/kg, the obtained P_t was 285.17 W/kg. The enhanced GCD rate, cycle stability, and E_t of the Ni₃V₂O₈-NC magnetic nanocomposite nominate the sample as an excellent supercapacitor electrode. This study paves the way for developing effective, efficient, affordable, and ecologically friendly electrode materials.

This study assessed the corrosion inhibitory and adsorption properties of two imidazol derivatives, namely 5-((2,4,5-triphenyl-1H-imidazol-1-yl)methyl)quinolin-8-ol (TIMQ) and 5-((2-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-1-yl)methyl)quinolin-8-ol (CDIQ), on carbon steel (CS) in 1 M of HCl using electrochemical methods, including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization measurements (PDP), UV–visible spectroscopy (UV–v), scanning electron microscopy (SEM), and molecular modeling. The findings showed that TIMQ and CDIQ were potent inhibitors with inhibition efficiencies of 94.8% and 95.8%, respectively. The potentiodynamic polarization experiments showed that the inhibitors worked as mixed-type inhibitors, and the impedance investigations supported the improvement of a protective layer for the inhibitor on the metal surface. Each inhibitor was adsorbed onto the carbon steel surfaces, according to the Langmuir adsorption method. The steel was shielded from acidic ions by an adsorbed coating of the inhibitor molecules, according to SEM. Density functional theory (DFT) calculations and molecular dynamics (MD) simulations were used to inspect the results, and a good correlation was found between these results and those of the study. This information can be applied to determine the effectiveness of inhibitors in a HCl acid solution.