In underwater environments, ensuring people’s safety is complicated, with potentially life-threatening outcomes, especially when divers have to work in deeper conditions. To improve the available solutions for working with robots in this kind of environment, we propose the validation of a control strategy for robots when taking objects from the seabed. The control strategy proposed is based on acceleration feedback in the model of the system. Using this model, the reference values for position, velocity and acceleration are estimated, and then the position error signal can be computed. When the desired position is obtained, it is possible to then obtain the position error. The validation was carried out using three different objects: a ball, a bottle, and a plant. The experiment consisted of using this control strategy to take those objects, which the robot carried for a moment to validate the stabilisation control and reference following the control in terms of angle and depth. The robot was operated by a pilot from outside of the pool and was guided using a camera and sonar in a teleoperated way. As an advantage of this control strategy, the model upon which the robot is based is decoupled, allowing control of the robot for each uncoupled plane, this being the main finding of these tests. This demonstrates that the robot can be controlled by a control strategy based on a decoupled model, taking into account the hydrodynamic parameters of the robot.
Exploration of the seabed may be complex, and different parameters must be considered for a robotic system to achieve tasks in this environment, such as soil characteristics, seabed gait, and hydrodynamic force in this extreme environment. This paper presents a gait simulation of a quadrupedal robot used on a typical terrigenous sediment seabed, considering the mechanical properties of the type of soil, stiffness, and damping and friction coefficients, referenced with the specialized literature and applied in a computational multibody model with many experimental data in a specific underwater environment to avoi hydrodynamic effects. The requirements of the positions and torque in the robot’s active joints are presented in accordance with a 5R mechanism for the leg and the natural pattern shown in the gait of a dog on the ground. These simulation results are helpful for the design of a testbed, with a leg prototype and its respective hardware and software architecture and a subsequent comparison with the real results.
El presente trabajo demuestra el proceso en la investigación inicial para el desarrollo de un actuador giratorio hidráulico para fines terapéuticos. El dispositivo se basa en la necesidad de un aparato motor aplicable a la rehabilitación de lesiones de rodilla, con la capacidad de ser usado en la hidroterapia, para lo cual se realiza una revisión bibliográfica y se define el comportamiento del actuador en función a los fenómenos de presión y flujo, definiendo así las funciones para el par y la velocidad del actuador. En una primera etapa, se presenta un modelo simplificado del actuador, para luego simular el comportamiento mecánico de los componentes con la ayuda de un software de análisis de elementos finitos. Concluyendo con la validación de los elementos principales del actuador, llamados eje y aleta, sometidos a los parámetros delimitados para la aplicación, dejando la base de un modelo del mecanismo útil para el cálculo de la dinámica del sistema como siguiente paso de la investigación. The present work demonstrates the process in the research and development of a hydraulic rotary actuator for therapeutic purposes. The device is based on the need for a motor apparatus applicable to the rehabilitation of knee injuries, with the ability to be used in hydrotherapy, for which a literature review is performed and the behavior of the actuator is defined depending on the pressure and flow phenomena, thus defining the functions for the torque and speed of the actuator. In the first stage, a simplified model of the actuator is presented, to proceed to simulate the mechanical behavior of the components with the help of finite element analysis software. Concluding with the validation of the main elements of the actuator, called axis and fin, subject to the parameters defined for the application, leaving the basis of a model of the mechanism useful for calculating the dynamics of the system as the next step of the investigation. Palabras claves: Actuador rotatorio, Simulación, Diseño, Mecánica hidráulica. Keywords: Rotary actuator, Simulation, Design, Hydraulic Mechanics.