There is an increasing demand for food packaging materials that are safe for the environment and human health. Pure polyvinyl alcohol (PVA) film is non-toxic and transparent but has poor UV-light shielding, thermal and moisture resistance, and antibacterial activity. Our previous work prepared and characterized a biofilm derived from PVA and edible Uncaria gambir extract (UG). The film has antibacterial properties and is anti-UV and flexible. However, UG is hydrophilic, making this film have low moisture absorption. To improve these properties, we trialed adding boric acid (BA) and UG into the PVA. This present study aims to characterize pure PVA film and blend films resulting from mixing PVA (10%), BA (0.5%), and UG (1%). It was found that the PVA/UG/BA film presented the best performance in terms of UV light absorption, tensile properties, thermal and moisture resistance, and antibacterial activity. This blend sample absorbs about 98% of the UV light at 400 nm wavelength without significantly sacrificing transparency. These findings indicate that UG and BA could be advantageous in the preparation of moisture and thermal-resistant UV shielding films with low toxicity and high antibacterial properties based on PVA. They were also found to be strong enough for food packaging applications.
Polyvinyl alcohol (PVA) has been used in packaging applications due to its biocompatibility and biodegradability. However, this non-toxic synthetic material belonging to a highly hydrophilic polymer has poor resistance to wet environments, no antibacterial activity, and low tensile and thermal properties. This study aims to prepare and characterize a PVA-based biocomposite film mixed with antimicrobial white ginger nanocellulose (GCNF) and zinc oxide (ZnO) nanoparticles. The film was processed using GCNF (0.1 g) or/and ZnO nanoparticles (0.5 g). The results confirm that the GCNF/ZnO/PVA-based film presents the strongest antimicrobial activity and the highest thermal resistance. This film also had the best value in tensile strength (19.7 MPa) and modulus (253.1 MPa); 63.9% and 117.9%, respectively higher than purce PVA. Its elongation at break was 56.6%, not statistically significantly different from the pure PVA film. Thus, this PVA-based hybrid biocomposite film reinforced by GCNF and ZnO has excellent potential for fresh food packaging in industrial applications.
Incorporating Uncaria gambir and zinc oxide completely blocks UV-A, UV-B, and blue light transmission in polyvinyl alcohol films, providing sustainable solutions for packaging and protective eyewear.
Non-pressurized hot water vapor treatment significantly enhances the properties of TEMPO-oxidized bacterial cellulose films. The treatment leads to increased crystallinity, reduced porosity, and improved mechanical properties.
Developing a conductive cellulose film without any metal compounds remains challenging, though in great demand. However, cellulose film prepared from bacterial cellulose (BC) powder without any metal compounds has poor tensile, physical, and electrical properties, thus limiting its application. Herein, this study aims to prepare and characterize an all-cellulose film from 2,2,6,6-Tetramethylpiperidin-1-yl)oxyl (TEMPO)-oxidized bacterial cellulose (TOBC) powders without adding metal compounds and treated by ultrasonication. TOBC powders are sonicated with various powers of 250, 500, and 750 W for 20 min without any other substance. It was proved that increasing the ultrasonication power level resulted in a significant improvement in the properties of the film. The ultrasonication of 750 W increased tensile strength by 85%, toughness by 308%, light transmittance by 542%, and electrical conductivity by 174% compared to the nonsonicated film. A light-emitting diode connected to a power source through this sonicated film was much brighter than that connected via a nonsonicated film. For the first time, this study reports the preparation of electrically conductive, transparent, strong, and bendable pure TOBC films by increasing ultrasonic power for environmentally friendly electronic devices application.
This study investigates the synergistic effects of incorporating layered double hydroxide (LDH) and tannic acid (TA) into polyvinyl alcohol (PVA) films to enhance their mechanical, tribological, and corrosion resistance properties for biomedical applications. Composite coating films were prepared by blending PVA with LDH and TA in various concentrations. The addition of LDH and TA significantly increased the crystallinity index of the composite films, with the highest crystallinity observed at 66.3% for the sample containing 1 wt% TA and 2 wt% LDH (PVA/TA1/LDH2). This enhancement in crystallinity contributed to improved mechanical performance, as demonstrated by tensile tests, where the PVA/TA1/LDH2 composite exhibited the highest tensile strength among all samples. Tribological testing revealed that the PVA/TA1/LDH2 composite also achieved the lowest coefficient of friction (COF), along with a minimal wear rate, indicating superior wear resistance. SEM analysis of the wear scars confirmed a narrow wear track and smoother surface morphology for this composite, which suggests effective load distribution and reduced surface degradation. The addition of TA was further shown to improve the corrosion resistance of the PVA composite films, with the PVA/TA1/LDH1 sample exhibiting the lowest corrosion current density (Icorr) of 0.36 μA cm−2, representing a significant improvement over neat PVA. These findings highlight the potential of PVA/LDH/TA films for coating applications in biomedical devices, where enhanced mechanical strength, wear resistance, and corrosion protection are critical. The synergistic effects of LDH and TA provide a pathway for developing durable and functional coatings, expanding the practical utility of PVA films in demanding biomedical environments.