In this Letter, a Ga2O3 vertical Schottky barrier diode (SBD) with self-aligned field plate and mesa termination is fabricated and studied. The combination of field plate and mesa termination can effectively make the electric field distribution uniform in the termination, and thus the proposed SBD features high breakdown voltage (BV). Moreover, to eliminate alignment deviation and simplify the fabrication process, a self-aligned etching process is developed. The experimental results show that a low specific on-resistance of 4.405 mΩ·cm2 and a high BV of 3113 V can be simultaneously derived on the proposed SBD, yielding a high power figure of merit of 2.2 GW/cm2. Meanwhile, a considerably low forward voltage of 1.53 V at 100 A/cm2 is also achieved, demonstrating the low conduction loss of the device.
1 August 2022 in ECS Journal of Solid State Science and Technology
In this paper, we demonstrate a high voltage normally-off p-GaN gate high-electron-mobility-transistor (HEMT) to realize the compatible high threshold voltage ( VTH ) and high drain current ( ID ) performance. With the optimization of the epitaxial structure, the presented device shows a significantly improved VTH . Meanwhile, by using the high-quality ALD-Al 2 O 3 passivation layer, the high ID is also realized in the device because of the access region resistance reduction. Supported by the device fabrication, the p-GaN gate HEMT delivers a VTH = 3.2 V measured by linear extrapolation, a relatively large saturation ID ( ID_SAT ) of 246 mA mm −1 , and a high breakdown voltage ( BV ) of 1830 V at 1 mA mm −1 . Among various p-GaN gate HEMTs with the ID_SAT over 200 mA mm −1 , the fabricated p-GaN gate HEMT has a competitive VTH . The results suggest that the proposed device could be a promising candidate in high VTH and ID power electronics.
18 December 2024 in Science China Information Sciences
In this paper, we design and fabricate a Schottky-metal-insulator-semiconductor (MIS) cascode anode GaN lateral field-effect diode (CA-LFED) to achieve ultralow reverse leakage current ( ILEAK ). The device based on AlGaN/GaN high-electron-mobility-transistor (HEMT) includes a normally-off MIS-controlled channel that is cascoded with a high barrier height Schottky contact. At reverse bias, the high electric-field is effectively prevented by the normally-off MIS-controlled channel edge. Together with the high barrier height Schottky contact, this feature significantly suppresses the ILEAK . Supported by the device fabrication, the CA-LFED with high breakdown voltage (BV) > 600 V shows an ultralow ILEAK of 3.6 × 10 −9 A/mm as well as a low forward voltage drop ( VF ) of 2.2 V. The performance suggests that the CA-LFED can be a promising candidate for ultralow ILEAK and better VF - ILEAK trade-off GaN power diode applications.
In this work, we used the Direct Laser Writing Grayscale Photolithography technology to fabricate a normally-off p-GaN gate high-electron-mobility transistor with the air-bridge source-connection. The air-bridge source-connection was formed using the Direct Laser Writing Grayscale Photolithography, and it directly connected the two adjacent sources and spanned the gate and drain of the multi-finger p-GaN gate device, which featured the advantages of stable self-support and large-span capabilities. Verified by the experiments, the fabricated air-bridge p-GaN gate devices utilizing the Direct Laser Writing Grayscale Photolithography presented an on-resistance of 36 Ω∙mm, a threshold voltage of 1.8 V, a maximum drain current of 240 mA/mm, and a breakdown voltage of 715 V. The results provide beneficial design guidance for realizing large gate-width p-GaN gate high-electron-mobility transistor devices.
Herein, AlGaN/GaN lateral diode with the Schottky‐Metal‐Insulator‐Semiconductor (MIS) cascode anode (CALD) to optimize forward voltage drop (VF) and reverse leakage current (ILEAK) trade‐off is proposed. In the CALD device, a normally‐on Ni/HfO2/AlGaN MIS‐controlled channel as well as a lateral Ni/GaN Schottky contact are cascoded at the anode. The designed normally‐on MIS‐controlled channel has high electron concentration at forward bias and prevents high electric‐field at reverse bias, which ensure both low VF and low ILEAK. Meanwhile, the Ni/GaN Schottky contact with a high Schottky barrier height further suppresses the ILEAK. As a result, the fabricated CALD demonstrates an optimized VF–ILEAK trade‐off relationship, including a low VF of 1.6 V and a low ILEAK of 5.2 × 10−8 A mm−1 (at reverse voltage of 400 V), together with a high breakdown voltage (BV) >700 V. These high performances suggest that the CALD can be a promising candidate for GaN power diode applications requiring a better VF–ILEAK trade‐off.