The aim of the research is to determine ways to improve the efficiency of grain materials pneumatic separation based on the study of the interaction mechanism of grains with the air flow in the channel elements, which are inclined sections of the air duct. The paper considers a modified separation method that separates the grain material according to the aerodynamic properties of the components in a vertical zigzag air channel in an aerodynamic and gravitational field. The studies were carried out by means of mathematical modeling followed by experimental confirmation of the modeling results. A computer mathematical model was created in the MathCad 13 application package to determine the parameters of the zigzag aspiration channel. This model describes the influx of parameters in the channel (width, height, cut of the zigzag ledge to the horizon, edge of the zigzag ledge) on the nature of the grain trajectory. As a result of the numerical simulation process using the mathematical package Mathematica, dependence was obtained to determine the trajectory of motion depending on the angular velocity. An increase in the pneumatic separation effect during the grain mixtures division due to the influence of the Magnus effect was established as a result of experimental studies. The design of a zigzag separator with an annular channel section has been improved based of the research carried out.
The possibilities of the action of uneven air flows on the grain material in the separating channels are still not used enough. The reason for this is the insufficient knowledge of the processes of interaction of the components of the grain material with an uneven air flow. The purpose of the research is to increase the efficiency of grain material separation according to aerodynamic properties by purposefully changing the diagram of air velocities in the channel sections using the actions of lateral and aerodynamic forces. The separation efficiency of grain material components was determined by trajectory analysis. The different geometry of the pneumatic separation channel was studied. The study of the distribution of air velocity and air pressure vectors in a vertical annular channel was carried out using the FlowVision software. It has been established that a change in the air velocity diagram can be implemented both by changing the geometric parameters of the channel and by additional distributed air supply through the perforation in the side walls of the pneumatic channel. Based on the analysis of the velocity field, an improved scheme of a pneumatic gravitational separator is proposed for separating grain material into three fractions according to aerodynamic characteristics.
The problem of obtaining high-quality (commercial) food grains and seeds of cereals and oilseeds can be solved by using fractional technology for post-harvest processing of grain. The shortcomings of existing machines can be eliminated if, when a particle moves in an ascending air flow, the orientation of its axes of inertia in the channel space is stabilized. One of the effective ways of directional orientation of elongated grains can be the imposition of a stable electric field on a two-phase flow (grain-air). The article theoretically summarizes and proposes a new solution to the scientific problem of increasing the efficiency of the process of separating grain material according to the complex of aerodynamic and electrophysical properties of individual components of the grain material.
31 August 2022 in INMATEH Agricultural Engineering
The relevance of research is conditioned upon the need to improve the efficiency of plot combines for harvesting sunflower seed crops. Experimental studies were carried out by planning and staging multifactorial experiments. The dependence of the force factors influence on the seed shedding from a sunflower basket was obtained based on the laboratory studies results. This dependence makes it possible to evaluate the influence of the parameters of the harvester header on the value of seed losses from shedding. The study made it possible to substantiate the design of the header attachment of the plot combine, consisting of a three-blade reel, box-type dividers and side shields. An experimental sample of the header attachment to the “Sampo-500” grain harvester has been developed and manufactured. Experimental studies of the influence of the speed of the combine movement and the coefficient of the operation kinematic mode of the reel to the developed device on the quality indicators of the harvesting of sunflower crops seeds were carried out.
31 December 2023 in INMATEH Agricultural Engineering
The article presents the results of studies of the process of threshing leguminous grass seeds with a drum-type threshing device. The process of material movement in the working gap of the drum deck was modelled and the intensity of the action of the working on the material under optimal operating conditions was substantiated. The dependence of the completeness of threshing alfalfa seeds on the number of rasp bar actions on the material on pendulum copra and in a threshing device was obtained based on the results of laboratory research. The influence of the design and technological parameters of the threshing device on the efficiency of threshing alfalfa seeds, as well as on the energy indicators of their operation, has been determined. The rational parameters of the threshing device are substantiated, which ensure complete threshing of seeds at the level of 96.5-98.2%, and damage to no more than 0.8% of seeds.
The research aims to develop a method for determining the content of impurities in grain materials by analyzing digital images. The addressed problem was establishing a method for grain quality control using machine vision to create integrated automation systems for separating grain materials in post-harvest processing. Based on the research result, it was established that grain materials are characterized by significant heterogeneity in physical and mechanical properties and variability of their fractional composition due to changes in the conditions of their threshing by combined harvesters. The contamination of grain materials with non-grain impurities is 0.2–3.3 %. Therefore, to increase the efficiency of post-harvest processing, it is necessary to ensure fast and accurate control of grain material flows. The developed software performed segmentation and determined the pixel areas of grain material objects, providing the rejection of noise and false objects. The weight coefficients of the five main components of wheat grain materials were evaluated based on the experimental results. Statistical processing showed a relatively low variability of the weight coefficients of winter wheat grain, not exceeding 1.6 %. The developed method for evaluating the quantitative content of fractions in grain material allowed for determining the contamination of grain in the separation processes using the experimentally evaluated relative weight coefficients of the main five fractions for wheat grain materials. The developed method helps create control and automation systems for post-harvest processing of grain materials.