The possibilities of the action of uneven air flows on the grain material in the separating channels are still not used enough. The reason for this is the insufficient knowledge of the processes of interaction of the components of the grain material with an uneven air flow. The purpose of the research is to increase the efficiency of grain material separation according to aerodynamic properties by purposefully changing the diagram of air velocities in the channel sections using the actions of lateral and aerodynamic forces. The separation efficiency of grain material components was determined by trajectory analysis. The different geometry of the pneumatic separation channel was studied. The study of the distribution of air velocity and air pressure vectors in a vertical annular channel was carried out using the FlowVision software. It has been established that a change in the air velocity diagram can be implemented both by changing the geometric parameters of the channel and by additional distributed air supply through the perforation in the side walls of the pneumatic channel. Based on the analysis of the velocity field, an improved scheme of a pneumatic gravitational separator is proposed for separating grain material into three fractions according to aerodynamic characteristics.
The research aims to develop a method for determining the content of impurities in grain materials by analyzing digital images. The addressed problem was establishing a method for grain quality control using machine vision to create integrated automation systems for separating grain materials in post-harvest processing. Based on the research result, it was established that grain materials are characterized by significant heterogeneity in physical and mechanical properties and variability of their fractional composition due to changes in the conditions of their threshing by combined harvesters. The contamination of grain materials with non-grain impurities is 0.2–3.3 %. Therefore, to increase the efficiency of post-harvest processing, it is necessary to ensure fast and accurate control of grain material flows. The developed software performed segmentation and determined the pixel areas of grain material objects, providing the rejection of noise and false objects. The weight coefficients of the five main components of wheat grain materials were evaluated based on the experimental results. Statistical processing showed a relatively low variability of the weight coefficients of winter wheat grain, not exceeding 1.6 %. The developed method for evaluating the quantitative content of fractions in grain material allowed for determining the contamination of grain in the separation processes using the experimentally evaluated relative weight coefficients of the main five fractions for wheat grain materials. The developed method helps create control and automation systems for post-harvest processing of grain materials.
29 August 2025 in Eastern-European Journal of Enterprise Technologies
This study’s object is the process of determining the fractional composition of winter wheat grain mixtures using computer vision and deep learning methods. The basic task that needs to be solved is the high complexity, subjectivity, and speed of determining the fractional composition of grain by conventional methods. The results obtained demonstrate the successful training and comparative analysis of several YOLO11-seg instance segmentation models on a specialized dataset deployed on the NVIDIA Jetson Orin platform. In particular, the YOLO11m-seg model with an image size of 640 × 640 pixels achieved the optimal compromise between accuracy and speed, achieving a Mask mAP50-95 index of 0.558 at an output speed of 62.5 ms/image. Training the YOLO11n-seg 1280 × 1280 model provided the best average segmentation accuracy (Mask mAP50-95 0.640) by increasing the performance of identifying objects of "complex" classes, which are key for accurate determination of the fractional composition. The results have made it possible to solve the problem under consideration through the empirically justified choice of architecture. Unlike hypothetical approaches, the study provides specific quantitative data on the performance of different YOLO11-seg architectures. That allowed for a reasonable selection of the model that best meets the requirements for accuracy and speed for practical deployment, solving the problem of uncertainty in the choice of architecture. The findings create the basis for automating grain quality control, increasing its efficiency, objectivity, and also significantly reducing labor intensity by automating routine operations. For practical use of the system, it is necessary to ensure stable lighting conditions, as well as the presence of a digital camera, a computer, and appropriate software
This document presents the results of research into the process of cleaning the holes of the vibrocentrifugal separator cylindrical sieves with rotary cleaners. The study of the nature of the movement of rotary sieve cleaners was carried out using electrooscillography methods. An original recording device with a sensor system was developed, which ensured the determination of the speed of the cylindrical sieve and the movement of the rotary cleaners of the sieve holes. The efficiency of the separator was confirmed experimentally
30 September 2025 in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
For industrial processing of oil-containing plant material, it is necessary to reduce its moisture content to 6–8%. The use of convective, energy-intensive dryers for drying seeds to low moisture levels is inefficient. The aim of the work is to improve the mathematical description of dynamic modes of grain drying in infrared energy supply systems and, based on this, to develop an automatic control system. The main method of researching the static and dynamic characteristics of the grain processing process using infrared radiation is the analytical method followed by experimental verification of the obtained mathematical description. To intensify the process of achieving the desired moisture content of the raw material, it is proposed to use contactless heating with infrared radiation. In this case, the issue of preventing overheating and scorching of the material is resolved by using vibration transportation with particle mixing and automating surface temperature control and its stabilization by adjusting the movement speed. Based on the dependencies, it can be concluded that an increase in the temperature of the grain due to distributed power input enhances the intensity of heating and stabilizes the temperature of the grain material. This leads to a reduction in the time required for the development of moisture gradients within individual grains and speeds up the evaporation of moisture from the surface of the grains. The paper clarifies the mathematical model of thermal processes of infrared processing of oilseeds, on the basis of which an automatic control system was developed for the implementation of energy-saving grain drying modes. The research results showed that the introduction of an automated infrared drying mode allows for a reduction in specific energy consumption by 30-40%.
Improving agricultural production technologies using digital tools contributes to achieving the United Nations’ Sustainable Development Goals, particularly ensuring food security, responsible resource consumption, and innovative infrastructure. The article presents the results of a study of the potential of using a smartphone camera to determine the parameters of a grain using machine vision. In particular, the results of studies on determining the deviation from the actual size and average color of the grain depending on the camera’s characteristics and the environment are presented. As a result of the research, the regularity of changes in the rational values of grain illumination from the camera resolution was established. It was also found that when the camera resolution changes from 3 MP to 40 MP, the required illumination level changes from 2075 lx to 3059 lx. The dependence of the change in the rational values of grain illumination on the grain length at different camera resolutions was obtained. It was found that when determining the length of a grain from 5.5 mm to 7.0 mm using a camera with a resolution of 3 MP, the required illumination level varies from 2842 lx to 3661 lx, and when using a camera with a resolution of 31 MP, from 1311 lx to 2131 lx. A regular change in the rational values of grain illumination (1274–3437 lx) from the camera’s light sensitivity in a range of ISO 200 – 1300 made it possible to choose a rational value of grain illumination at the possible light sensitivity of the camera.