Zhizhou Zhang

Prof. Dr. Zhizhou Zhang

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 December 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
ZZZhizhou Zhang
Zhizhou Zhang
LYli yang
li yang
A new method for optimizing the fuzzy PID controller, based on an artificial electric field algorithm (AEFA), is proposed in this paper, aiming at improving the stability indicator of the Brushless DC (BLDC) motor for the small satellite attitude control flywheel. The BLDC motor is the basic part of the small satellite attitude control flywheel. In order to accurately control the attitude of the small satellite, a good motor control system is very important. Firstly, the mathematical model of the BLDC motor is established and the BLDC motor speed control system using traditional PID control is designed. Secondly, considering that the small satellite speed control system is a nonlinear system, a fuzzy PID control is designed to solve the shortcomings of the fixed parameters of the traditional PID control. Finally, we find that the control accuracy of the fuzzy PID control will change with the range of the input. Therefore, we introduce the AEFA to optimize fuzzy PID to achieve high-precision attitude control of small satellites. By simulating the BLDC motor system, the proposed fuzzy PID controller based on AEFA is compared with the traditional PID controller and the fuzzy PID controller. Results from different controllers show that the proposed control method could effectively reduce steady state error. In addition, the proposed fuzzy PID–AEFA controller has the better anti-jamming capability.

1 January 2023 in Electronic Research Archive
Verified
Journal Article
Open access
PDF file
TYTongtong Yu
Tongtong Yu
ZZZhizhou Zhang
Zhizhou Zhang
YLYang Li
Yang Li
WZWeilong Zhao
Weilong Zhao
JZJinchu Zhang
Jinchu Zhang
The rotor of the magnetic suspension turbomachinery is supported by the magnetic suspension bearing without contact and mechanical friction, which directly drives the high-efficiency fluid impeller. It has the advantages of high efficiency, low noise, less fault and no lubrication. However, the system often has some unknown mutation, time variation, load perturbation and other un-certainties when working, and the traditional Proportion Integration Differentiation (PID) control strategy has great limitations to overcome the above disturbances. Therefore, this paper firstly establishes a mathematical model of the rotor of magnetic levitation turbomachinery. Then, a linear active disturbance rejection controller (LADRC) is presented, which can not only improve the above problems of PID control, but also avoid the complex parameter tuning process of traditional nonlinear active disturbance rejection control (ADRC). However, LADRC is easy to induce the overshoot of the system and cannot filter the given signal. On this basis, an improved LADRC with a fast-tracking differentiator (FTD) is proposed to arrange the transition process of input signals. The simulation results show that compared with the traditional PID controller and single LADRC, the improved linear active disturbance rejection control method with fast tracking differentiator (FTD-LADRC) can better suppress some unknown abrupt changes, time variation and other uncertainties of the electromagnetic bearing-rotor system. At the same time, the overshoot of the system is smaller, and the parameters are easy to be set, which is convenient for engineering application.

1 August 2007
Verified
Conference Paper
Closed access
ZZZhizhou Zhang
Zhizhou Zhang
ZLZhiqiang Long
Zhiqiang Long
LSLonghua She
Longhua She
WCWensen Chang
Wensen Chang
This paper is concerned with the synthesis of a robust and optimal controller for open-loop unstable systems possessing actuator redundancy. The designed linear quadratic state feedback regulator can maintain the close-loop stability in the presence of some certain actuator failures. At the first design stage, a discriminance of actuator functional redundancy is given, which is the precondition to design the robust controller. Then a synthesis method based on a sufficient condition which guarantees the existence of the state-feedback fault-tolerant law is presented. The robust Linear Quadratic (LQ) regulator synthesis is shown to be equivalent to a standard LQ regulator design with a given dynamic performance index of the system. The effectiveness of this method has been verified on the fault control system design for the double electromagnets suspension model of maglev train.

1 August 2007
Verified
Conference Paper
Closed access
ZZZhizhou Zhang
Zhizhou Zhang
ZLZhiqiang Long
Zhiqiang Long
LSLonghua She
Longhua She
WCWensen Chang
Wensen Chang
This paper focuses on the problem of fault tolerant control for maglev suspension system based on simultaneous stabilization theory. Given two plants which are linear models of suspension system before and after the electromagnet failure respectively, we seek for a single compensator that stables both of them simultaneously. A systematic and simple linear control system design method for highly nonlinear plants is adopted. The simulation for the single magnet model shows that the designed fault tolerant controller has a better static and dynamic performance compared with a conventional PID controller. The method may provide valuable experience to the research on maglev suspension control system with more failures.

1 January 2024 in Electronic Research Archive
Verified
Journal Article
Open access
PDF file
ZZZhizhou Zhang
Zhizhou Zhang
YPYueliang Pan
Yueliang Pan
WZWeilong Zhao
Weilong Zhao
JZJinchu Zhang
Jinchu Zhang
ZZZheng Zi
Zheng Zi
HZHehong Zhang
Hehong Zhang
In fault detection, feedback control, and other fields, real-time differential estimation of a given signal in a complex noise environment is an important but challenging task. In this paper, a discrete-time fast nonlinear tracking differentiator (FNTD) based on hyperbolic tangent functions was proposed. To start, the differential signal acquisition problem was equated to the time-optimal control (TOC) law for constructing a double-integral system using a state feedback approach. Next, the FNTD algorithm based on the hyperbolic tangent function was presented by utilizing the isochronic region (IR) method in the discrete time domain. Then, the frequency-domain characteristics of the FNTD were analyzed and the rule for tuning the parameters was provided by the frequency scan test method. Finally, the simulation results demonstrated that the proposed FNTD had fast and accurate tracking performance, as well as excellent filtering and differential extraction capability compared with other differentiators.

6 May 2022 in Symmetry
Verified
Journal Article
Open access
PDF file
ZYZeng Yuan
Zeng Yuan
KLKun Liu
Kun Liu
JWJingbo Wei
Jingbo Wei
ZZZhizhou Zhang
Zhizhou Zhang
To realize the hyperstatic performance index of a magnetically suspended flywheel and simultaneously suppress the vibration force caused by mass imbalance and sensor runout, a compound control method based on a repetitive controller and displacement force compensation of the synchronous force is proposed. First, the mechanism of different interference vibration forces is analyzed by establishing a model of the magnetically suspended flywheel. The analysis shows that the x–y direction is symmetric, and the flywheel structure has symmetry. Second, considering the symmetry of the x- and y-directions, the x-direction is taken as an example for analysis, the parameter design and stability analysis are carried out, and the range of parameters of the compound repetitive control method is obtained. Finally, a flywheel with different speeds is simulated. It was found that the vibration force of each frequency can be suppressed by the compound control method, and the inhibition rate of the vibration force can reach as much as 95%. The results show that the unbalanced vibration and vibration force caused by the sensor runout can be effectively suppressed by using the compound repetitive control method.