Methods to achieve large-scale production of defect-free graphene are needed to enable the commercial development of graphene-based devices. It is now shown that high-shear mixing is an effective way to exfoliate graphene and other two-dimensional materials in liquid volumes up to hundreds of litres.

Few-layer black phosphorus (BP) is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of environmental stability severely limits its synthesis and processing. Here we demonstrate that high-quality, few-layer BP nanosheets, with controllable size and observable photoluminescence, can be produced in large quantities by liquid phase exfoliation under ambient conditions in solvents such as N-cyclohexyl-2-pyrrolidone (CHP). Nanosheets are surprisingly stable in CHP, probably due to the solvation shell protecting the nanosheets from reacting with water or oxygen. Experiments, supported by simulations, show reactions to occur only at the nanosheet edge, with the rate and extent of the reaction dependent on the water/oxygen content. We demonstrate that liquid-exfoliated BP nanosheets are potentially useful in a range of applications from ultrafast saturable absorbers to gas sensors to fillers for composite reinforcement.

Super sensitive, not so silly, putty: Many composites blend stiff materials, such as glass or carbon fibers, into a softer elastic polymer matrix to generate a material with better overall mechanical toughness. Boland et al. added graphene to a lightly cross-linked silicone polymer (also known as Silly Putty). The resulting composite has unusual mechanical properties, allowing the manufacture of strain sensors that can detect respiration and the footsteps of spiders. Science , this issue p. 1257

Monitoring of human bodily motion requires wearable sensors that can detect position, velocity and acceleration. They should be cheap, lightweight, mechanically compliant and display reasonable sensitivity at high strains and strain rates. No reported material has simultaneously demonstrated all the above requirements. Here we describe a simple method to infuse liquid-exfoliated graphene into natural rubber to create conducting composites. These materials are excellent strain sensors displaying 10⁴-fold increases in resistance and working at strains exceeding 800%. The sensitivity is reasonably high, with gauge factors of up to 35 observed. More importantly, these sensors can effectively track dynamic strain, working well at vibration frequencies of at least 160 Hz. At 60 Hz, we could monitor strains of at least 6% at strain rates exceeding 6000%/s. We have used these composites as bodily motion sensors, effectively monitoring joint and muscle motion as well and breathing and pulse.

Liquid phase exfoliation has become an important method for the production of large quantities of two-dimensional (2D) nanosheets. This method is versatile, having been used to produce dozens of different 2D materials in a range of stabilizing liquids. The resultant liquid-suspended nanosheets have been characterized in great detail and have been processed into a number of structures for a wide range of applications. This has led to a growing number of researchers adopting this method. As a result, best practice in terms of experimental procedure has evolved rapidly over recent years. As experimental complexity has increased, it has become more and more difficult to discuss the rational behind a chosen experimental procedure in full detail using standard “Methods” sections due to the frequent use of procedures developed in related prior reports. This can make it difficult to reproduce complex procedures and acts as a barrier to new researchers entering the field. To address this shortcoming, here we describe in detail the experimental methods and best practice used in our group when producing liquid exfoliated nanosheets.