This work aims to analyze the influence of selected plants on the synthesis of silver nanoparticles (AgNPs). Six plants were chosen for the experiment, from which extracts were prepared: maclura fruit, spruce and ginkgo needles, green algae (Ch. kessleri), and mushrooms, namely Collybia nuda, and Macrolepiota procera. The composition of the extracts and colloids after preparation of the nanoparticles was analyzed using FTIR analysis. The composition of the extracts affected not only the rate of the synthesis but also the shape of the nanoparticles. TEM analysis confirmed the synthesis of mainly spherical nanoparticles (size range: 10–25 nm). However, triangular prisms and polyhedral nanoparticles synthesized by the extracts containing mainly flavonoids, terpenes, and phenols (the main compounds of resins) were also confirmed. EDS analysis was used to analyze the composition of the nanoparticles. It was proven that by choosing the right plant extract and using the appropriate technology with extract treatment, it is possible to prepare nanoparticles of different shapes.

The aim of the work was to prepare a polymer matrix composite doped by silver nanoparticles and analyze the influence of silver nanoparticles (AgNPs) on polymers’ optical and toxic properties. Two different colloids of AgNPs were prepared by chemical reduction. The first colloid, a blue one, contains stable triangular nanoparticles (the mean size of the nanoparticles was ~75 nm). UV–vis spectrophotometry showed that the second colloid, a yellow colloid, was very unstable. Originally formed spherical particles (~11 nm in diameter) after 25 days changed into a mix of differently shaped nanoparticles (irregular, triangular, rod-like, spherical, decahedrons, etc.), and the dichroic effect was observed. Pre-prepared AgNPs were added into the PVA (poly(vinyl alcohol)) polymer matrix and PVA–AgNPs composites (poly(vinyl alcohol) doped by Ag nanoparticles) were prepared. PVA–AgNPs thin layers (by a spin-coating technique) and fibers (by electrospinning and dip-coating techniques) were prepared. TEM and SEM techniques were used to analyze the prepared composites. It was found that the addition of AgNPs caused a change in the optical and antibiofilm properties of the non-toxic and colorless polymer. The PVA–AgNPs composites not only showed a change in color but a dichroic effect was also observed on the thin layer, and a good antibiofilm effect was also observed.

The aim of this study was to prepare the silver nanoparticles (AgNPs) via chemical reduction and analyze the impact of used reduction agents: sodium borohydride (NaBH₄), trisodium citrate (TSC), polyvinylpyrrolidone (PVP), and hydrogen peroxide (H₂O₂) on the reduction rate of Ag⁺ ions to Ag⁰, and on nanoparticles shape. It was proven that combinations of reduction agents dramatically influence the synthesis rate of AgNPs and the color of solutions, which depends on the shape and size of nanoparticles. NaBH₄, TSC, and PVP showed good reduction power. In particular, TSC proved to be a key factor influencing the shape of AgNPs. The shape of nanoparticles influences the color of colloidal solutions. Yellow solutions, where UV-vis absorbance maxima (ABS_max) are in the wavelength interval 380–420 nm, contain spherical particles with a mean size of 25 nm, whereas the blue shift of ABS_max to wavelengths higher than 750 nm indicate the presence of triangular nanoparticles (size interval 18–150 nm). A mixture of spherical, triangular, irregular, and hexagonal nanoparticles give different color, e.g., green. The formation and stability of AgNPs was tracked by UV-vis spectroscopy, size and shape by TEM techniques, and particle size distribution was studied by particle size analyzer.

A chemical method was successfully used to synthesize silver nanoparticles (AgNPs) with various shapes. The shape of the nanoparticles affects the color of the colloid (spherical—yellow solution, triangular—blue, a mixture of spherical and triangular—green). The NaBH₄, which acts as the main reducing agent and H₂O₂ have a significant impact on the shape of AgNPs. It has also been shown that the ratio between precursor, reducing, and the stabilizing agent is crucial for the formation of the required nanoparticles. The light sensitivity of AgNPs and the presence of H₂O₂ lead to a significant change in AgNPs’ shape and size with time and to the formation of the dichroic effect. UV–vis spectrophotometry, TEM, SEM/FIB, and EDX methods were used to analyze the shape, size, and composition of the nanoparticles. Polymer matrix composite with AgNPs was prepared by the “ex-situ” method.

The synthesis of silver nanoparticles (AgNPs) using sustainable and non-toxic methods has become an important research focus due to the limitations of conventional chemical approaches, which often involve hazardous reagents and produce unstable products. In particular, the effects of reaction conditions on the quality and stability of AgNPs obtained via green synthesis remain insufficiently understood. This study addresses this gap by examining the influence of pH and temperature on the synthesis of AgNPs using Rosmarinus officinalis extract as both reducing and stabilizing agents. UV-vis spectroscopy and TEM analysis revealed that optimal conditions for producing uniform, stable, and spherical AgNPs were achieved at pH 8, with a narrow size distribution (~17.5 nm). At extreme pH values (≤3 or ≥13), nanoparticle formation was hindered by aggregation or precipitation, while elevated temperatures mainly accelerated reaction without altering particle morphology. HRTEM and SAED confirmed the crystalline face-centered cubic structure, and colloids synthesized at pH 8 showed excellent stability over 30 days. Overall, the results demonstrate that precise pH control is critical for obtaining high-quality AgNPs via a simple, scalable, and environmentally friendly approach. Their stability and homogeneous size highlight potential applications in biomedicine, food packaging, and sensing, where reproducibility and long-term functionality are essential.

The aim of this work was to propose a simple method for synthesizing differently shaped AgNPs and to find a suitable stabilizing/capping agent to ensure the non-toxicity of AgNPs. Using a chemical method, by simply changing the volume of reducing agents, we successfully prepared colloids of differently shaped AgNPs (spherical (~10 nm), triangular (~40 nm), rodlike (~30 nm), and a mixture of these shapes). The nanoparticle sizes and shapes affect the solution color. UV-VIS spectroscopy was used to evaluate the colloidal solutions, and transmission electron microscopy was used to analyze the shape and size of the nanoparticles. To create non-toxic and stable AgNPs, it is necessary to modify the surface properties of the nanoparticles; one possibility is to create a biocompatible layer on the nanoparticle surface. We successfully applied a combination of trisodium citrate and polyvinylpyrrolidone, thereby preventing the release of silver ions, which are responsible for the toxic effects of AgNPs. The synthesized nanoparticles show very low, mostly negligible antibiofilm activity against the green algae Chlorella kessleri. AgNPs were used to prepare polymer-AgNP composite thin layers and fibers. It was proved that AgNPs can influence polymer matrix properties.