This work aims to analyze the influence of selected plants on the synthesis of silver nanoparticles (AgNPs). Six plants were chosen for the experiment, from which extracts were prepared: maclura fruit, spruce and ginkgo needles, green algae (Ch. kessleri), and mushrooms, namely Collybia nuda, and Macrolepiota procera. The composition of the extracts and colloids after preparation of the nanoparticles was analyzed using FTIR analysis. The composition of the extracts affected not only the rate of the synthesis but also the shape of the nanoparticles. TEM analysis confirmed the synthesis of mainly spherical nanoparticles (size range: 10–25 nm). However, triangular prisms and polyhedral nanoparticles synthesized by the extracts containing mainly flavonoids, terpenes, and phenols (the main compounds of resins) were also confirmed. EDS analysis was used to analyze the composition of the nanoparticles. It was proven that by choosing the right plant extract and using the appropriate technology with extract treatment, it is possible to prepare nanoparticles of different shapes.
We demonstrated the deposition of the architecture of graphene oxide on stainless steel substrate and its potential environmental application. The synthesis and characterization of graphene oxide were described. The controlled formation of graphene oxide coatings in the form of the homogenous structure on stainless steel is demonstrated by scanning electron microscopy (SEM). The structure, morphology and properties of the material were assessed by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, transmission electron microscopy (TEM) and atomic force microscopy (AFM). The morphology and stability of these structures are shown to be particularly related to the pre-treatment of stainless steel substrate before the electrophoretic deposition. This approach opens up a new route to the facile fabrication of advanced electrode coatings with potential use in environmental applications.
This article focuses on the eco-friendly (green) synthesis of silver nanoparticles (AgNPs) and their incorporation into a polymer matrix. For AgNPs synthesis, Lavandula angustifolia (lavender) leaf extract was used as a reducing and stabilizing agent, and as a silver precursor, AgNO3 solution with different concentrations of silver (50, 100, 250, and 500 mg/L) was used. Prepared AgNPs colloids were characterized using UV–vis spectrophotometry, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The spherical morphology of AgNPs with an average size of 20 nm was confirmed across all samples. Further, the antimicrobial properties of the AgNPs were evaluated using the disk diffusion method on algae (Chlorella kessleri) and the well diffusion method on bacteria (Staphylococcus chromogenes, Staphylococcus aureus, and Streptococcus uberis), along with root growth inhibition tests on white mustard (Sinapis alba). Polymer composite (PVA–AgNPs) was prepared by incorporation of AgNPs into the polymer matrix. Subsequently, non-woven textiles and thin foils were prepared. The distribution of AgNPs within the nanocomposites was observed by scanning electron microscopy (SEM). Antibacterial properties of PVA–AgNPs composites were analyzed on bacteria Streptococcus uberis. It was found that not only AgNPs showed good antimicrobial properties, but toxic properties were also transferred to the PVA–AgNPs nanocomposite.
A biological method was successfully applied to synthesize spherical silver nanoparticles (AgNPs) while using the extract of lavender (Ex-L) (lat. Lavandula angustifolia) as the reducing and stabilizing agent. The produced nanoparticles were spherical with an average size of 20 nm. The AgNPs’ synthesis rate confirmed the extract’s excellent ability to reduce silver nanoparticles from the AgNO3 solution. The presence of good stabilizing agents was confirmed by the excellent stability of the extract. Nanoparticles’ shapes and sizes did not change. UV-Vis absorption spectrometry, Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were used to characterize the silver nanoparticles. The silver nanoparticles were incorporated into the PVA polymer matrix by the “ex situ” method. The polymer matrix composite with AgNPs was prepared in two ways: as a composite film and nanofibers (nonwoven textile). The anti-biofilm activity of AgNPs and the ability of AgNPs to transfer toxic properties into the polymer matrix were proved.
In this work, we aimed to analyze the impact of extracts prepared from dried Lavandula angustifolia (lavender) flowers and leaves on the synthesis of silver nanoparticles (AgNPs) (wherein the shape and size of AgNPs and the efficiency of the process were analyzed) and to prove the possibility of transferring the AgNPs’ properties into a polymer matrix. An ex situ method was used to incorporate AgNPs and prepare polymer matrix composite (PVP-AgNPs) films (via casting) and fibers (via electrospinning). We used UV-vis absorption spectrophotometry, Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM), and Scanning Electron Microscopy (SEM) to analyze and characterize the AgNPs and prepared composites. The results of FTIR analysis confirmed the presence of phytochemicals that can reduce silver ions from Ag+ to Ag0 in both extracts. The presence of spherical nanoparticles was confirmed via TEM regardless of the type of extract used. However, leaf extract caused the formation of AgNPs with a narrower size interval (an average size of 20 nm), and with higher efficiency, compared to the nanoparticles prepared using the flower extract. The nanoparticles prepared using the leaf extract were then incorporated into the polymer matrix, and thin polymer composite films and fibers were successfully prepared. The anti-biofilm activity of AgNPs colloids and prepared polymer nanocomposites against green algae Chlorella kessleri was studied. The anti-biofilm properties of the AgNPs were proved, along with the efficient transfer of their toxic properties into nontoxic polymer.
The presented article focuses on the possibilities of using microwave energy in the treatment of flue dust originating from the production of steel in EAF, as well as flue dust arising in the hot-dip galvanizing process of steel. The mentioned types of waste in the form of flue dust contain significant amounts of zinc (22-43%) and iron (0.6-30%), which could be reused after heat treatment in the sense of a circular economy. Since zinc is also found in the mentioned wastes in the form of a stable spinel structure of franklinite (ZnFe2O4), its treatment through microwave roasting in the presence of suitable susceptors of electromagnetic radiation is a prospective method of obtaining pure metals. The advantage of microwave processing is the volumetric nature of the heating, the faster course of carbothermic reactions and the sufficiently lower temperature of the waste treatment compared to conventional heating.