Spectral sensing is increasingly used in applications ranging from industrial process monitoring to agriculture. Sensing is usually performed by measuring reflected or transmitted light with a spectrometer and processing the resulting spectra. However, realizing compact and mass-manufacturable spectrometers is a major challenge, particularly in the infrared spectral region where chemical information is most prominent. Here we propose a different approach to spectral sensing which dramatically simplifies the requirements on the hardware and allows the monolithic integration of the sensors. We use an array of resonant-cavity-enhanced photodetectors, each featuring a distinct spectral response in the 850-1700 nm wavelength range. We show that prediction models can be built directly using the responses of the photodetectors, despite the presence of multiple broad peaks, releasing the need for spectral reconstruction. The large etendue and responsivity allow us to demonstrate the application of an integrated near-infrared spectral sensor in relevant problems, namely milk and plastic sensing. Our results open the way to spectral sensors with minimal size, cost and complexity for industrial and consumer applications.
For decades, near-infrared (NIR) spectroscopy has been a valuable tool for material analysis in a variety of applications, ranging from industrial process monitoring to quality assessment. Traditional spectrometers are typically bulky, fragile and expensive, which makes them unsuitable for portable and in-field use. Thus, there is a growing interest for miniaturized, robust and low-cost NIR sensors. In this study, we demonstrate a handheld NIR spectral sensor module, based on a fully-integrated multipixel detector array, sensitive in the 850–1700 nm wavelength range. Differently from a spectrometer, the spectral sensor measures a limited number of NIR spectral bands. The capabilities of the spectral sensor module were evaluated alongside a commercially available portable spectrometer for two application cases: to quantify the moisture content in rice grains and to classify plastic types. Both devices achieved the two sensing tasks with comparable performance. Moisture quantification was achieved with a root mean square error (RMSE) prediction of 1.4% and 1.1% by the spectral sensor and spectrometer, respectively. Classification of the plastic type was achieved with a prediction accuracy on unknown samples of 100% and 96.4% by the spectral sensor and spectrometer, respectively. The results from this study are promising and demonstrate the potential for the compact NIR modules to be used in a variety of NIR sensing applications.
Spectral sensing is an emerging field driven by the need for fast and non-invasive methods for the chemical analysis of materials in agri-food, healthcare, and industrial applications. We demonstrate a near-infrared spectral sensor, based on a scalable fabrication process and combining high responsivity, narrow linewidth, and low noise. The sensor consists of 16 resonant-cavity-enhanced photodetectors, each showing a unique spectral response consisting of narrow peaks. The spectral sensor thereby covers the wavelength range between 890 and 1650 nm, where organic materials show relevant spectral features from first and second overtones. For the fabrication of the detector arrays, we propose a simple and scalable fabrication approach that yields largely improved device characteristics with respect to the grey-scale electron-beam lithography process reported earlier. Through a series of five optical lithography steps, tuning layers of silicon nitride are deposited stepwise to obtain 16 different thicknesses and reduced surface roughness. With this novel fabrication approach, the obtained photodetectors achieve an average peak linewidth of 55 nm, a maximum peak responsivity of 0.3 A/W, and high suppression of the non-resonant background. We also demonstrate the impact of these improvements on the sensing performance for two relevant problems through an experiment and a set of simulations. With lateral dimensions of ∼1.4 × 1.4 mm2, the proposed photodetector array can be the key to robust, portable, and low-cost sensing instrumentation for on-site material analysis in various application fields.
A static filter array is developed based on Fabry–Perot cavities operating in the mid‐infrared range from 2 to 4.5 µm, matching the absorption region of several gases relevant for air quality monitoring. The filters include two distributed Bragg reflectors and a high‐index tuning element with varying thickness in between. The filters display high peak transmittance () and controllable peak width. The robustness, ease of fabrication and the possibility to tune the optical response to a specific application make the integrated filter arrays suitable for compact sensing systems.
We present a spectral sensor based on an integrated array of resonant-cavity-enhanced photodetectors operating in the near-infrared. Prediction models are built directly using the 15 photodetector responses, without the need for spectral reconstruction.
An integrated semiconductor spectral sensor is demonstrated. It is based on an array of resonant- cavity-enhanced photodetectors covering the short-wavelength infrared region. Its robustness and small footprint make this device suitable for on-site spectral sensing applications.