For decades, near-infrared (NIR) spectroscopy has been a valuable tool for material analysis in a variety of applications, ranging from industrial process monitoring to quality assessment. Traditional spectrometers are typically bulky, fragile and expensive, which makes them unsuitable for portable and in-field use. Thus, there is a growing interest for miniaturized, robust and low-cost NIR sensors. In this study, we demonstrate a handheld NIR spectral sensor module, based on a fully-integrated multipixel detector array, sensitive in the 850–1700 nm wavelength range. Differently from a spectrometer, the spectral sensor measures a limited number of NIR spectral bands. The capabilities of the spectral sensor module were evaluated alongside a commercially available portable spectrometer for two application cases: to quantify the moisture content in rice grains and to classify plastic types. Both devices achieved the two sensing tasks with comparable performance. Moisture quantification was achieved with a root mean square error (RMSE) prediction of 1.4% and 1.1% by the spectral sensor and spectrometer, respectively. Classification of the plastic type was achieved with a prediction accuracy on unknown samples of 100% and 96.4% by the spectral sensor and spectrometer, respectively. The results from this study are promising and demonstrate the potential for the compact NIR modules to be used in a variety of NIR sensing applications.
Spectral sensing is an emerging field driven by the need for fast and non-invasive methods for the chemical analysis of materials in agri-food, healthcare, and industrial applications. We demonstrate a near-infrared spectral sensor, based on a scalable fabrication process and combining high responsivity, narrow linewidth, and low noise. The sensor consists of 16 resonant-cavity-enhanced photodetectors, each showing a unique spectral response consisting of narrow peaks. The spectral sensor thereby covers the wavelength range between 890 and 1650 nm, where organic materials show relevant spectral features from first and second overtones. For the fabrication of the detector arrays, we propose a simple and scalable fabrication approach that yields largely improved device characteristics with respect to the grey-scale electron-beam lithography process reported earlier. Through a series of five optical lithography steps, tuning layers of silicon nitride are deposited stepwise to obtain 16 different thicknesses and reduced surface roughness. With this novel fabrication approach, the obtained photodetectors achieve an average peak linewidth of 55 nm, a maximum peak responsivity of 0.3 A/W, and high suppression of the non-resonant background. We also demonstrate the impact of these improvements on the sensing performance for two relevant problems through an experiment and a set of simulations. With lateral dimensions of ∼1.4 × 1.4 mm2, the proposed photodetector array can be the key to robust, portable, and low-cost sensing instrumentation for on-site material analysis in various application fields.
Nanophotonic sensors offer precision, remote read-out, and immunity to electromagnetic interference but face adoption challenges due to complex, costly readout instrumentation, typically based on high resolution. This article challenges the notion that high spectral resolution is necessary for high-performance optical sensing. We propose co-optimizing the line widths of the sensor and readout to achieve picometer-level precision using low-resolution multispectral detector arrays and incoherent light sources. This approach is validated in temperature sensing, fiber-tip refractive index sensing, and biosensing with nanophotonic transducers, achieving superior precision to high-resolution spectrometers. This paradigm change in readout will enable optical sensing systems with costs and dimensions comparable to electronic sensors.
One of the most powerful ways to manipulate spins in nanometer-scale devices is by converting a charge current to a spin current via spin–orbit coupling. The resulting spin–orbit torques (SOTs) have been investigated and utilized extensively in the past decade. Quantitatively, however, SOTs may exhibit a non-trivial angular dependence, which is not well explored. Here, we develop a nested iterative analysis to determine the magnitude of SOTs from harmonic Hall measurements. This updated method largely improves the fit quality in the full magnetic field range and accurately retrieves even higher order, anisotropic spin–orbit torque coefficients. The numerical implementation of our algorithm is fast, robust, and designed for easy integration into existing analysis schemes. We verify our code using simulated data with and without anisotropic SOTs. Accurately quantifying higher order SOT terms can be especially useful for modeling non-uniform magnetic textures such as domain walls and skyrmions and current-induced magnetization switching characteristics.
Measuring the composition of materials at a distance is a key requirement in industrial process monitoring, recycling, precision agriculture, and environmental monitoring. Spectral imaging in the visible or near-infrared (NIR) spectral bands provides a potential solution by combining spatial and spectral information, and its application has seen significant growth over recent decades. Low-cost solutions for visible multispectral imaging (MSI) have been developed due to the widespread availability of silicon detectors, which are sensitive in this spectral region. In contrast, development in the NIR has been slower, primarily due to the high cost of indium gallium arsenide (InGaAs) detector arrays required for imaging. This work aims to bridge this gap by introducing a standoff material sensing concept which combines spatial and spectral resolution without the hardware requirements of traditional spectral imaging systems. It combines spatial imaging in the visible range with a CMOS camera and NIR spectral measurement at selected points of the scene using an NIR spectral sensor. This allows the chemical characterization of different objects of interest in a scene without acquiring a full spectral image. We showcase its application in plastic classification, a key functionality in sorting and recycling systems. The system demonstrated the capability to classify visually identical plastics of different types in a standoff measurement configuration and to produce spectral measurements at up to 100 points in a scene.
Near-infrared spectral sensing serves as a powerful technique for nondestructive analysis of material composition in a wide field of applications. A typical spectral sensor comprises an array of detectors, each with a response in a certain spectral band. We demonstrate an algorithm capable of tailoring these sensors for a specific near-infrared spectroscopy application by optimizing for all possible combinations of spectral bands. This approach outperforms manually selected designs, achieving high sensing performance even with just a few pixels. The results are confirmed by experiments on fabricated four-pixel devices, which feature a sensing accuracy exceeding the one of general-purpose sensors for a problem of practical relevance. This approach may enable cost-effective spectral sensors with simple read-out mechanisms for industrial and consumer applications.