As 3D acquisition equipment picks up steam, point cloud registration has been applied in ever-increasing fields. This paper provides an exhaustive survey of the field of point cloud registration for laser scanners and examines its application in large-scale aircraft measurement. We first researched the existing representative point cloud registration algorithms, such as hierarchical optimization, stochastic and probability distribution, and feature-based methods, for analysis. These methods encompass as many point cloud registration algorithms as possible; typical algorithms of each method are suggested respectively, and their strengths and weaknesses are compared. Lastly, the application of point cloud registration algorithms in large-scale aircraft measurement is introduced. We discovered that despite the significant progress of point cloud registration combining deep learning and traditional methods, it is still difficult to meet realistic needs, and the main challenges are in the direction of robustness and generalization. Furthermore, it is impossible to extract accurate and comparable features for alignment from large-scale aircraft surfaces due to their relative smoothness, lack of obvious features, and abundance of point clouds. It is necessary to develop lightweight and effective dedicated algorithms for particular application scenarios. As a result, with the development of point cloud registration technology and the deepening into the aerospace field, the particularity of the aircraft shape and structure poses higher challenges to point cloud registration technology.
In today’s world, energy is undoubtedly one of the most significant problems. As the global electricity consumption continues to increase, electric motors, which are widely used as power devices, account for an increasingly prominent proportion of the energy consumed. Motors now consume about 45% of the total electricity in the world (60% in China); therefore, improving motor efficiency has become an important way to achieve carbon emission reduction and sustainable development. The aim of this research was to devise a new strategy to reduce CO2 emissions other than by building green power factories, because even the building of green power factories produces a great deal of CO2 emissions, and improving motor efficiency to reduce CO2 emissions could contribute to sustainable development worldwide. However, the improvement of motor efficiency encounters challenges, such as nonlinearity and disturbances, which affect the motor performance and energy efficiency. To address this issue, this paper proposes a control algorithm for permanent-magnet synchronous motors (PMSMs) that is highly efficient and would be most widely used based on a fuzzy control adaptive forgetting factor. It aims to enhance the efficiency and accuracy of the online parameter estimation for the PMSM flux linkage, thereby achieving more precise and energy-efficient motor control. Firstly, the recursive least-squares parameter estimation algorithm is used to identify the parameters of the PMSM. This ensures that the parameter estimation values can be dynamically updated with data changes, adapting to the time-varying parameters. Secondly, the Padé approximation method is adopted, which is a method that does not depend on the motor hardware, to improve the accuracy of the linearized model of the motor. Finally, a control algorithm based on the fuzzy control adaptive forgetting factor algorithm is constructed on a physical experimental platform. A comparison of these results proves that the control technology under this algorithm provides a new energy-saving control strategy that can estimate the motor flux linkage parameters more accurately, help to reduce energy consumption, promote the use of clean energy, and achieve sustainable performance optimization.
Keeping a certain constant airflow in a lot of applications is critical, such as certain airflow volumes in the cabin of an aircraft, submarines, tunnels, and buildings. All fans change their output airflow and air pressure by changing motor speed in real applications. In order to achieve the target airflow volume, normal operation detects the data first, then provides orders to engineers to adjust manually. Extra airflow volume sensors are equipped to measure the airflow so that people know what the current airflow is and how much needs to be adjusted. Based on normal technology, airflow volume sensors and motor speed inverters are necessary parts of a whole air supply system. This research tries to integrate a fuzzy control algorithm into a motor control technology to build a new kind of fan that can not only self-detect the airflow volume changes but also can self-adjust the airflow volumes automatically. This self-detecting and adjusting fan can lead air supply systems in devices and buildings to need no airflow volume sensors, make the air supply system building cost lower, and make the maintaining and operating cost lower.
To address the core challenges of real flight data—including numerous parameters, complex features, strong nonlinearity, and significant noise—this paper proposes an end-to-end aerodynamic parameter estimation method integrating data mining and machine learning. First, the Maximum Information Coefficient (MIC) is employed to uncover nonlinear correlations between flight parameters and aerodynamic coefficients. Combined with Pearson correlation coefficients, redundant features are eliminated to construct a discriminative feature subset. Building upon this foundation, a Transformer-BiLSTM hybrid model is proposed. The bidirectional long short-term memory (BiLSTM) captures local temporal patterns, while the Transformer's self-attention mechanism models global dependencies. The hybrid model is trained and tested using real flight test data. Results demonstrate that the constructed hybrid model achieves outstanding performance in estimating aerodynamic coefficients for civil aircraft. Compared to standalone BiLSTM or Transformer models, as well as state-of-the-art iTransformer sequence models and other mainstream approaches, it exhibits significant advantages in estimation accuracy. This research provides a reliable data-driven solution for flight aerodynamic parameter estimation, fully showcasing the immense application potential and practical value of intelligent technologies in complex industrial scenarios.
Computational fluid dynamics (CFD) numerical simulation as the primary research tool is particularly essential for its credibility during the aerodynamic design of aircraft. To further promote CFD verification and validation on the airliner, a high-fidelity model reconstruction of the airliner is fundamental. Based on this, we put forward a novel framework, to our best knowledge, to reconstruct a high-fidelity standard model for an airliner efficiently, and the feasibility and accuracy of these reconstructed models are accessed by the CFD simulation-based validation method. First and foremost, a laser scanner was placed at each station around the airliner to scan and acquire multiview point clouds. Afterwards, the truncated least-squares-based algorithm was adopted to register these point clouds entirely. Additionally, we fitted the nonuniform rational basis spline surface based on the least-squares progressive and iterative approximation algorithm. Finally, CFD simulation results were compared and analyzed with the aerodynamic data obtained by the aircraft manufacturer under the same Mach number of the uniform model. It turns out that the coincidence between them is high, and the changing trend is basically consistent. Hence, this method is highly feasible and can establish a high-fidelity standard model of an airliner with unified high and low speeds so that its appearance, test data, and research results can be adopted as the standard data for CFD verification and validation.
In the feed industry, counterflow coolers are widely used cooling devices. The flow characteristics and pressure loss should be focused on during the design and optimization stages. Due to the complex accumulation of feed particles, it is difficult to accurately analyze the flow field behavior inside the cooler through experiments. Therefore, a detailed study was conducted with a cooler from Buhler using a simulation approach. First of all, the significant influence of the porous jump boundary of flap outlet in the simulation model on the flow field and temperature distribution was revealed. Second, limitations of the Ergun equation in estimating the drag coefficients of the porous medium and the porous jump boundary were explored. Finally, a rapid calculation model for pressure loss was established based on simulation data. Within a wide range of resistance coefficient inputs, the relative error between the model calculation and the corresponding simulation results is very small. Using this model to input a series of resistance coefficients, combined with a small number of overall pressure loss measurements for comparison, the resistance coefficient of the porous medium of the new material can be determined, solving the problem in determining this coefficient through typical measurement experiments at low flow velocity and the lack of effective estimation formulas. This research can provide practical references for improving cooling equipment and enhancing cooler efficiency, and the rapid calculation model can be extended to any fluid machinery containing porous media materials that satisfy Darcy–Forchheimer's law.