In today’s world, energy is undoubtedly one of the most significant problems. As the global electricity consumption continues to increase, electric motors, which are widely used as power devices, account for an increasingly prominent proportion of the energy consumed. Motors now consume about 45% of the total electricity in the world (60% in China); therefore, improving motor efficiency has become an important way to achieve carbon emission reduction and sustainable development. The aim of this research was to devise a new strategy to reduce CO2 emissions other than by building green power factories, because even the building of green power factories produces a great deal of CO2 emissions, and improving motor efficiency to reduce CO2 emissions could contribute to sustainable development worldwide. However, the improvement of motor efficiency encounters challenges, such as nonlinearity and disturbances, which affect the motor performance and energy efficiency. To address this issue, this paper proposes a control algorithm for permanent-magnet synchronous motors (PMSMs) that is highly efficient and would be most widely used based on a fuzzy control adaptive forgetting factor. It aims to enhance the efficiency and accuracy of the online parameter estimation for the PMSM flux linkage, thereby achieving more precise and energy-efficient motor control. Firstly, the recursive least-squares parameter estimation algorithm is used to identify the parameters of the PMSM. This ensures that the parameter estimation values can be dynamically updated with data changes, adapting to the time-varying parameters. Secondly, the Padé approximation method is adopted, which is a method that does not depend on the motor hardware, to improve the accuracy of the linearized model of the motor. Finally, a control algorithm based on the fuzzy control adaptive forgetting factor algorithm is constructed on a physical experimental platform. A comparison of these results proves that the control technology under this algorithm provides a new energy-saving control strategy that can estimate the motor flux linkage parameters more accurately, help to reduce energy consumption, promote the use of clean energy, and achieve sustainable performance optimization.
Urban air mobility aircraft are considered an effective solution to traffic jams. These particular aircraft come with different designs and are very different from traditional aircraft. An effective weight reduction method is required to enable ongoing design validation and verification. This paper presents the design of an aircraft with a high space utilization rate of the take-off and landing stage, which allows vertical take-off and landing and has long battery life. For the components fixed at the wing tips and used for installing ducted fans and based on the fused deposition modeling (FDM) process, this paper puts forward two methods to carry out the lightweight design according to the stress conditions of the aircraft, namely, the manual setting the internal structure and the topology optimization. The results show that when the force on the component is small, manual setting is very effective for the purpose of weight reduction, which can also improve the manufacturability of the aircraft.
The highly nonlinear aerodynamic interference in tandem-airfoil configurations significantly hinders the precise exploitation of their aerodynamic potential. To address this issue, this study establishes a high-fidelity computational fluid dynamics benchmark. A high-quality sample set is constructed using Latin hypercube sampling combined with an intra-layer replacement strategy. Subsequently, a Gaussian process surrogate model and Bayesian optimization are employed to maximize the total system lift coefficient across a four-dimensional design space comprising longitudinal and vertical separations, fore airfoil angle of attack, and angle of attack difference. Global sensitivity analysis indicates that longitudinal separation dominates the interference modes. Optimization reveals a distinct mode switching phenomenon using a longitudinal separation of twice the chord length as the critical threshold. In the close-coupled configuration, a negative optimal angle of attack difference enhances the slot effect and upwash induction, thereby delaying rear airfoil stall and achieving synergistic lift enhancement. Conversely, in the distant-coupled configuration, the system transitions to a decoupled compensation mode, where a positive angle of attack difference compensates for the effective angle of attack loss induced by wake downwash. This research elucidates the competitive mechanisms between inter-airfoil slot flow and wake interference, providing a theoretical reference for the aerodynamic layout optimization of tandem-airfoil aircraft.
On the basis of analyzing the emergency response process of typical petroleum and petrochemical accidents, this paper analyzes the emergency rescue cases of four typical accidents, concludes the deficiencies existing in the current rescue process, and puts forward the development requirements for the future remote collaborative emergency response mode. Through the above analysis, in combination with the current communication and the development of intelligent equipment, remote collaborative emergency mode based on integrated communication scheme for refinery plant emergencies and visual remote assistance emergency mode based on AR for well control emergencies are proposed. Respectively, the technical framework and system functions of the two are described, and the future development direction is given.
This study experimentally investigates the influence of distributed leading-edge roughness on an open trailing-edge laminar separation bubble over a symmetric airfoil at Rec=4.0×104. Three roughness levels on the suction-side leading-edge region were tested against a smooth baseline. Luminescent oil-film, smoke-wire, hot-wire and force measurements were combined to relate wall-shear-stress topology, shear-layer development and lift response. The smooth airfoil formed an open trailing-edge bubble at an angle of attack (AOA) of 2°, while a closed bubble appeared at AOA=3°. Weak roughness had little effect. Moderate roughness strengthened coherent vortex roll-up but did not yield reattachment at AOA=2°. Strong roughness caused earlier vortex breakdown, broader spectra, wallward displacement of the high-shear region, and recovery of positive wall shear over the aft chord. In this case, the initially open bubble shifted toward a closed or partially closed topology, and the low-incidence lift curve became more nearly linear. The findings provide experimental evidence for assessing how leading-edge surface condition affects separation topology and low-incidence force response in roughness-sensitive low-Reynolds-number blade and foil sections.