Eder Andrade da Silva

Eder Andrade da Silva


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
GSGabriel Brugues Soares
Gabriel Brugues Soares
Jorge Gimenez LedesmaJorge Gimenez Ledesma
Jorge Gimenez Ledesma
ESEder Andrade da Silva
Eder Andrade da Silva
Oswaldo Hideo Ando JuniorOswaldo Hideo Ando Junior
Oswaldo Hideo Ando Junior
This systematic review outlines the application of thermoelectric generators (TEGs) as energy sources in CubeSats. While CubeSats currently rely on solar cells with efficiencies between 16.8% and 32.2%, their performance diminishes with increased distance from the Sun. TEGs, although used in radioisotope thermoelectric generators (RTGs) for satellites, remain underutilized in CubeSats. A literature review revealed 33 relevant articles, with 21.2% employing simulation software to evaluate thermal behavior. Among 34 patents, only one mentioned micro-TEGs, with most focusing on structural improvements. Patent activity peaked between 2016 and 2020, emphasizing structural and thermal optimization, but no patents addressed TEGs as energy sources for CubeSats, highlighting a significant research gap. TEGs present a viable solution for harnessing residual heat in CubeSats.

17 October 2024 in Energies
Verified
Journal Article
Open access
PDF file
Oswaldo Hideo Ando JuniorOswaldo Hideo Ando Junior
Oswaldo Hideo Ando Junior
ESEder Andrade da Silva
Eder Andrade da Silva
ELEmerson Rodrigues de Lira
Emerson Rodrigues de Lira
SDSergio Vladimir Barreiro Degiorgi
Sergio Vladimir Barreiro Degiorgi
Joao CarmoJoao Carmo
Joao Carmo
This study presents a comparative analysis of the accuracy of different methodologies for the design and performance evaluation of thermoelectric generators (TEGs), using analytical, computational numerical, and experimental approaches. TEGs are promising devices for capturing waste energy in industrial processes, converting waste heat into electrical energy and contributing to energy sustainability. However, the efficiency of TEGs is a significant challenge due to their low conversion rates. To address this challenge, three different methodologies were developed and systematically compared. Analytical Model: Developed for the electrical design of thermoelectric micro generators, using theoretical performance data and industrial temperature gradients. This method offers a robust theoretical view but may not capture all practical variables. Computational model in Simulink/MATLAB: Created and validated to consider the variation of the Seebeck coefficient and the internal resistance of thermoelectric modules with temperature. This model provides an accurate simulation of operating conditions but depends on the accuracy of the input parameters. Experimental Multi-string Electrical Arrangement Prototype: This involved the design and construction of a prototype followed by experimental tests to validate its performance. This method provides valuable empirical data but can be limited by the complexity and cost of the experiments. The results show that each methodology has specific advantages and limitations, offering valuable insights for the development of more efficient TEG systems. The comparison of analytical, numerical, and experimental methods revealed differences in accuracy and efficiency, highlighting the importance of an integrated approach to TEG design. This study lays a solid foundation for future research and practical applications in the field of industrial residual energy harvesting.

19 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
ESEder Andrade da Silva
Eder Andrade da Silva
CUCarlos Alejandro Urzagasti
Carlos Alejandro Urzagasti
Joylan Nunes MacielJoylan Nunes Maciel
Joylan Nunes Maciel
Jorge Gimenez LedesmaJorge Gimenez Ledesma
Jorge Gimenez Ledesma
Marco Roberto CavallariMarco Roberto Cavallari
Marco Roberto Cavallari
Oswaldo Hideo Ando JuniorOswaldo Hideo Ando Junior
Oswaldo Hideo Ando Junior
Due to the growing concern and search for energy sustainability, there has been an increase in recent years in solutions in the area of energy management and efficiency related to the Internet of Things (IoT), the home energy management system (HEMS), and the building energy management system (BEMS). The availability of the energy consumption pattern in real time is part of the necessity presented by this research. It is essential for perceiving and understanding the savings opportunities. In this context, this manuscript presents the development of a self-calibrated embedded system to measure, monitor, control, and forecast the consumption of electrical loads, enabling the improvement of energy efficiency through the management of loads performed by the demand side. The validation of the produced device was performed by comparing the readings of the device with the readings obtained through the evaluation system of the integrated circuit manufacturer ADE9153A®, Analog Devices® purchased in Brazil. The result obtained with the developed device featured errors smaller than ±0.1%, which were in addition smaller than ±1% with respect to the full scale, thus proving to be a viable solution for the proposed application.

27 June 2024 in Electronics
Verified
Journal Article
Open access
PDF file
ESEder Andrade da Silva
Eder Andrade da Silva
WFWerner Moreira Chaves Filho
Werner Moreira Chaves Filho
Marco Roberto CavallariMarco Roberto Cavallari
Marco Roberto Cavallari
Oswaldo Hideo Ando JuniorOswaldo Hideo Ando Junior
Oswaldo Hideo Ando Junior
The increase in demand for electricity due to industrial development and the growing use of electronic equipment has led to the need for new alternative energy sources, such as photovoltaic solar energy conversion. In this context, organic photovoltaic (OPV) stands out as an efficient way of generating energy indoors. An electrical power supply system (EPS) was developed to power a commercial electronic lock, using OPV as the energy source. The system was designed with a charging control to match the panel voltage to a supercapacitor charge accumulator and a boost converter. Tests on the bench and in a real scenario demonstrated the viability and effectiveness of the system, showing that it is capable of operating self-sufficiently with a minimum daily illuminance of 250 lux for 12 h. The results indicate that the system can be applied to various loads with low energy consumption, promoting energy efficiency in different contexts.

18 December 2025 in Energies
Verified
Journal Article
Open access
PDF file
ELEmerson Rodrigues de Lira
Emerson Rodrigues de Lira
ESEder Andrade da Silva
Eder Andrade da Silva
SDSergio Vladimir Barreiro Degiorgi
Sergio Vladimir Barreiro Degiorgi
Joao CarmoJoao Carmo
Joao Carmo
Oswaldo Hideo Ando JuniorOswaldo Hideo Ando Junior
Oswaldo Hideo Ando Junior
Thermoelectric systems configured in multistring arrays of thermoelectric generators (TEGs) represent a promising solution for energy harvesting in environments with non-uniform thermal gradients. However, the presence of multiple maximum power points (MPPs) in such configurations poses significant challenges to energy extraction efficiency. This study presents a comprehensive performance evaluation of four maximum power point tracking (MPPT) algorithms, Perturb and Observe (P&O), Incremental Conductance (InC), Particle Swarm Optimization (PSO), and Genetic Algorithm (GA), applied to multistring thermoelectric generator (TEG) arrays under multiple and asymmetric thermal gradients. The simulated systems, modeled in MATLAB/Simulink, replicate real-world thermoelectric configurations by employing series-parallel topologies and eleven distinct thermal scenarios, including uniform, localized, and sinusoidal temperature distributions. The key contribution of this work lies in demonstrating the superior capability of metaheuristic algorithms (PSO and GA) to locate the global maximum power point (GMPP) in complex thermal environments, outperforming classical methods (P&O and InC), which consistently converged to local maxima under multi-peak conditions. Notably, PSO achieved the best average convergence time (0.23 s), while the GA recorded the fastest response (0.05 s) in the most challenging multi-peak scenarios. Both maintained high tracking accuracy (error ≈ 0.01%) and minimized power ripple, resulting in conversion efficiencies exceeding 97%. The study emphasizes the crucial role of algorithm selection in maximizing energy harvesting performance in practical TEG applications such as embedded systems, waste heat recovery, and autonomous sensor networks. Future directions include physical validation through prototypes, incorporation of dynamic thermal modeling, and development of hybrid or AI-enhanced MPPT strategies.