Ethanol has become a viable feedstock for basic organic synthesis. The catalytic conversion of ethanol provides access to such chemicals as diethyl ether, ethyl acetate, and acetaldehyde. Carbonaceous materials are extensively studied as supports for heterogeneous catalysts due to their chemical and thermal stability, high surface area, and tunable texture. In this paper, ethanol conversion over K10Co3.7Mo12S-catalysts supported on novel activated carbon (AC) materials (i.e., novel powder-AC (DAS and YPK-1), fiber non-woven AC material (AHM), and fabric active sorption (TCA)) was investigated. The catalysts were prepared by the incipient wetness co-impregnation method followed by sulfidation. The catalysts were characterized by employing N2 adsorption–desorption measurements, TEM, SEM/EDX, UV–Vis spectroscopy, and XRF. Catalytic performance was assessed in a fixed-bed down-flow reactor operating at 320 °C, 2.5 MPa, and with continuous ethanol feeding in an He atmosphere. Activity is highly dependent on the support type and catalyst’s textural properties. The activity of the fiber-supported catalysts was found to be greater than the powder-supported catalysts. Ethanol conversion at T = 320 °C, P = 2.5 MPa, and GHSV = 760 L h−1 kgcat−1 increased as follows: (38.7%) KCoMoS2/YPK-1 < (49.5%) KCoMoS2/DAS < (58.2%) KCoMoS2/TCA < (67.1%) KCoMoS2/AHM. Catalysts supported by powder-AC enhanced the formation of MoS2-crystallites, whereas the high acidity of fiber-AC seemed to inhibit the formation of MoS2-crystallites. Simultaneously, a high surface area and a microporous catalytic structure enhance the formation of oxygenates from hydrocarbons. The dehydration and dehydrogenation reactions, which led to the creation of ethene and acetaldehyde, were shown to require a highly acidic catalyst, while the synthesis of ethyl acetate and higher alcohols required a less acidic catalyst.
8 April 2021 in International Journal of Green Energy
The main purpose of this present work is to produce and improve Jatropha curcas L biodiesel using mixed natural zeolite and furfural to meet the demand of green and clean production. Trans-esterification of Jatropha oil using natural microporous zeolite (96.6% Thomsonite and 3.4% Analacime) has been carried out. The optimum molar ratio (oil: methanol: zeolite) to yield 85.65 wt.% of Jatropha biodiesel was found to be (1:3:0.2) respectively. XRD technique was used to identify the natural zeolite. Physicochemical characteristics of biodiesel were determined according to American Society for Testing and Materials (ASTM) standard methods and were found to be within ASTM permissible limits required for the operation of diesel engines except ash content. The element composition of synthesized biodiesel was investigated by Inductively Coupled Plasma. The synthesized biodiesel has been treated by different ratio of furfural. The best wt. % of furfural was found to be 66.6% (1:3, biodiesel: furfural). Treatment of Jatropha curcas L. biodiesel with furfural increased FAME and decreased alcohols, carbonyl, cyclic, and other compounds. Besides, furfural improved the physico-chemical characteristic of Jatropha curcas L. biodiesel within ASTM permissible limits. Cetane number has increased from 59.8 to 63.5 after treatment by 66.6% of furfural.