Alexander Lipchak

Dr. Alexander Lipchak

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2024 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
YMYuriy I. Mamontov
Yuriy I. Mamontov
YZYuriy A. Zemskov
Yuriy A. Zemskov
IUIgor V. Uimanov
Igor V. Uimanov
SBSergey V. Barakhvostov
Sergey V. Barakhvostov
ALAlexander Lipchak
Alexander Lipchak
SBSergey A. Barengolts
Sergey A. Barengolts
Within the article, a preeroded copper cathode was subjected to the impact of a series of high-voltage pulses with a duration of $<$ 1 ns for surface conditioning. An effective cathode surface area was $\sim$ 0.01 mm $^{2}$ . Preerosion of the cathode surface was performed using a series of vacuum arc discharges of microsecond duration. As a result, a well-pronounced microrelief with a typical dimension of $\sim$ 5–10 $\mu $ m was formed at the cathode surface. Then, to smooth the microrelief, the cathode was placed into a vacuum setup based on a RADAN pulse generator with a pulse duration of $<$ 1 ns and a pulse amplitude of up to $-$ 140 kV. About 900 discharges of a subnanosecond duration were initiated. To estimate the conditioning effectiveness, the state of the cathode surface was controlled by studying the cathode field-emission characteristics and cathode surface imaging by scanning electron microscopy (SEM). The field-emission characteristic study made it possible to estimate the electric field enhancement factor $\beta $ near the cathode surface before and after the conditioning. It was shown that the subnanosecond conditioning led to a decrease in $\beta $ by a factor of 6–8 from $\sim$ 170 after eroding to $\sim$ 20–30. Employing SEM investigation of the sample surface morphology, it was found that a typical microrelief dimension was decreased from $\sim$ 5–10 to $\sim$ 1–2 $\mu $ m or less. That is, a proposed conditioning technique allowed significant smoothing of the cathode surface.

26 May 2021 in Instruments and Experimental Techniques
Verified
Journal Article
Closed access
PDF file
ALAlexander Lipchak
Alexander Lipchak
SBS. V. Barakhvostov
S. V. Barakhvostov
The design of the spark gap of a pulsed high-current electron accelerator controlled by laser radiation is described. The results of testing the spark gap during operation as a primary switch in a high-current accelerator of the Radan type are presented. The developed spark gap provides an accelerator switch-on jitter of no worse than 0.3 ns.

1 October 2024 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
SRS. B. Rutin
S. B. Rutin
ALAlexander Lipchak
Alexander Lipchak
This paper presents a setup for studying non-stationary heat exchange in liquid media on a scale of small times and sizes at high heat flux densities created using a high-speed precision power controller. A platinum wire with a diameter of 20 μm and a length from 0.5 to 1 cm is used as a probe. The heating time ranged from 1 to 300 ms, and the heat flux densities from 1 to 20 MW/m2 were achieved in the experiments. Strictly specified conditions for heat release in the probe are confirmed by maintaining a constant power in a series of pulses with an accuracy of 0.05%. Acquiring a primary electrical signal of thermograms is synchronized with high-speed video recording, allowing an accurate relationship between the applied thermal load and the mechanics of processes in the studied liquid. The setup capabilities were shown by comparing the boiling patterns of a simple substance, such as ethanol, and a solution with a lower critical solution temperature, a 30 vol. % solution of polypropylene glycol-425 in water, which have similar thermograms. As a result, a qualitative difference between the heating and boiling patterns observed using high-speed video and the presented setup fitting its purpose has been shown.

3 April 2023 in Journal of Optical Technology
Verified
Journal Article
Closed access
PDF file
VSV. I. Solomonov
V. I. Solomonov
ASA. V. Spirina
A. V. Spirina
AMA. S. Makarova
A. S. Makarova
ALAlexander Lipchak
Alexander Lipchak
VLV. V. Lisenkov
V. V. Lisenkov
Subject of study. The possibility of using the nonlinear current mode of operation of a photomultiplier tube for measurements of luminescence kinetics was investigated. Aim of study. This study aimed to validate the possibility of using the nonlinear current mode of operation of a photomultiplier tube to determine the kinetic properties of small luminescence signals of condensed media, including the signals that cannot be detected in a linear current mode. Method. The signal arriving at a high-impedance (1 MΩ) input of a digital oscilloscope from a photomultiplier tube via a coaxial cable was measured. This signal is a convolution of a photocurrent pulse with a kinetic instrument function determined by the discharge of capacitance in the measurement circuit of the photomultiplier tube. The bandwidth of the circuit was determined by the lowest frequency of its elements instead of the characteristic time of the instrument function. The real photocurrent signal was reconstructed by the deconvolution of the digital convoluted array. The pulsed cathodoluminescence method was used to detect the kinetics. Main results. A method for measuring the kinetics of small optical signals in the current mode of operation of a photomultiplier tube connected to a high-impedance input of a digital oscilloscope was presented. The results of using this method to measure the kinetics of pulsed cathodoluminescence of impurity and intrinsic centers in ceramic and monocrystalline samples of yttrium aluminum garnet were presented. The direct determination of characteristic decay times by approximating the convoluted curves without deconvolution was demonstrated for an exponential luminescence decay profile. Practical significance. The proposed method for the characteristic time detection of luminescence kinetics enables comprehensive analysis of luminescence that can be applied in various sectors of the national economy.

27 October 2022 in Condensed Matter
Verified
Journal Article
Open access
PDF file
NVNikolay B. Volkov
Nikolay B. Volkov
ALAlexander Lipchak
Alexander Lipchak
The development of a wide-range phenomenological model of metal with a small number of adjustable parameters for studying the behavior of metals in expanded and compressed states under the exposition of high energy density fluxes is the objective of the paper present. Both the reference data, methods of the quantum-statistical model of the atom, the density functional theory, and the requirement to the expanded and compressed states description of metal should be consistent on their boundary were used in the model. The expressions for thermodynamic functions and the critical parameters of expanded iron were obtained within the framework of the soft sphere model. The Grüneisen parameters calculated for the expanded and compressed states of the metal appear to be in good agreement with each other was shown. A calculation technique of the ion component average charge of the metal in expanded and compressed states is proposed. The experimentally defined volume range of V/V0 = 3–4 in which the character of iron conductivity changes from metallic to non-metallic includes the obtained in frameworks of our approach value of the critical volume: V/V0 = 3.802 was established. The behavior of the average charge of the ion component is discussed. The contribution of the thermal electrons to the thermodynamic functions is evaluated.

11 August 2023 in Condensed Matter
Verified
Journal Article
Open access
PDF file
NVNikolay B. Volkov
Nikolay B. Volkov
ALAlexander Lipchak
Alexander Lipchak
This article presents a theoretical study of the optical and transport properties of metals. Iron, as an example, was used to discuss, through a theoretical description, the peculiarities of these properties in the compressed and expanded states under the influence of high-density energy fluxes. By solving the semi-classical Boltzmann equation for conduction electrons for a broad range of densities and temperatures, the expressions of electrical conductivity, electronic thermal conductivity, and thermoelectric coefficient calculations were derived. The real and imaginary parts of the iron permittivity and the energy absorption coefficient for the first and second harmonics of Nd:YAG laser radiation were obtained. The calculation peculiarities of the metal’s optical characteristics of matter in an expanded state in a broad range of densities and temperatures were considered. The analysis of the obtained results shows their agreement with the theoretical description for cases of ideal non-degenerate and dense degenerate electron plasmas. It is shown that the behavior of the electrical conductivity and optical characteristics in the critical and supercritical regions of density and temperature are in agreement with the known experimental results.