Polyimide (PI) refers to a type of high-performance polymer containing imide rings in the main chain, which has been widely used in fields of aerospace, microelectronic and photonic devices, gas separation technology, and so on. However, traditional aromatic PIs are, in general, the inefficient fluorescence or even no fluorescence, due to the strong inter- and intramolecular charge transfer (CT) interactions causing unavoidable fluorescence quenching, which greatly restricts their applications as light-emitting functional layers in the fabrication of organic light-emitting diode (OLED) devices. As such, the development of fluorescent PIs with high fluorescence quantum efficiency for their application fields in the OLED is an important research direction in the near future. In this review, we provide a comprehensive overview of fluorescent PIs as well as the methods to improve the fluorescence quantum efficiency of PIs. It is anticipated that this review will serve as a valuable reference and offer guidance for the design and development of fluorescent PIs with high fluorescence quantum efficiency, ultimately fostering further progress in OLED research.

An increasing number of textiles is being functionalized using magnetron sputtering. A wide spectrum of colors can be produced by coating thin films on textiles via magnetron sputtering, which reduces pollution issues by bypassing the high requirements of water, chemical dyes, and auxiliary setups of traditional textile dyeing. By covering single-layer, double-layer, or multilayer films with metal, semiconductor, or ceramic targets possessing a particular structure, composition, thickness, and morphology using the magnetron sputtering method, metallic colors or interference structural colors have been successfully produced on textile surfaces. Intelligent, decorative, and practical products use coated colors and other features. Herein, we review the research advancements in textile coloring and applications of colored textiles coated by sputtering, including the sputter deposition technique, color-generating mechanism, and principles of the color regulation of sputtered thin films. The difficulties and future directions for research on colored sputtered thin films in textiles is also summarized.

Organic perovskites are promising optoelectronic semiconductor materials with photoelectric applications. It is known that the luminescence of perovskites is highly sensitive to hydron molecules due to its low moisture resistance of crystal structure, indicating its potential application on humidity-sensing. Herein, a novel perovskite-based compound (PBC) with minimal defects was developed to promote the photoluminescence performance via optimization of the drying method and precursor constitutions. Perovskite materials with good structural integrity and enhanced fluorescence performance up to four times were obtained from supercritical drying. Moreover, the hydrophilic polymer matrix, polyethylene oxide (PEO), was added to obtain a composite of perovskite/PEO (PPC), introducing enhanced humidity sensitivity and solution processibility. These perovskite/PEO composites also exhibited long-term stability and manifold cycles of sensitivity to humidity owing to perovskite encapsulation by PEO. In addition, this precursor solution of perovskite-based composites could be fancily processed by multiple methods, including printing and handwriting, which demonstrates the potential and broaden the applications in architecture decoration, logos, trademarks, and double encryption of anti-fake combined with humidity.

A tert-butyldiphenylsilyl-containing polyimide (PI-OSi) has been established as a colorimetric and ratiometric chemosensor for rapid detecting fluoride ions (F⁻). The UV-vis absorbance ratio value (A₃₂₂/A₂₈₈) of PI-OSi in a DMF solution displays a wide linear range change to F⁻ concentrations with a detection limit (DL) value of 2.13 μM. Additionally, adding incremental amounts of F⁻ to a DMF solution of PI-OSi shows an immediate color change to yellow and finally to green from colorless. More interestingly, the resulting PI-OSi plus F⁻ system (PI-OSi·F) could detect trace water in DMF. The A₂₉₂/A₃₂₂ value of PI-OSi·F almost linearly increases with low water content, which suggests convenient quantitative sensing of trace water content in DMF. The DL value of PI-OSi·F for sensing water in DMF is determined to be 0.00149% (v/v). The solution color of PI-OSi·F returns to colorless when the water content increases, indicating that PI-OSi·F can conveniently estimate water content in DMF by naked-eye detection. The detection mechanisms confirmed by an ¹H NMR study and a DFT calculation involve a F⁻-induced desilylation reaction of PI-OSi to form phenolate anion followed by protonation with trace water. Finally, PI-OSi film was fabricated for the colorimetric detection of F⁻ and water in CH₃CN.

A nylon-like polyester tire cord, which combined the characteristics of nylon and polyester tire cords, was designed as the carcass reinforcement material used to meet the increasing demands of the tire industry for performance and impact on the environment. Tires’ carcass construction plays a crucial role in affecting handling performance and ride comfort. Small changes in the carcass component can lead to significant improvements in the total tire/vehicle performance. This study evaluated the performance of nylon-like polyester and nylon 6 motorcycle tires. The results showed that the nylon-like polyester tire passed all indoor tests, and post-cure inflation (PCI) could be eliminated, resulting in energy and cost savings. The rolling resistance coefficient of the nylon-like polyester tire was reduced by 6.8% compared to that of the nylon 6 control tire, which could save fuel and have a positive impact on the environment. Nylon-like polyester tire cord extracted from the experimental tire possessed a higher modulus compared to that of nylon 6 tire cord, which could lead to better handling and ride comfort performance. Morphological pictures showed that both nylon-like polyester and nylon 6 cords extracted from tires had a good rubber coverage and comparable adhesion properties.