This study investigates the effect of delay in compaction on the optimum moisture content and the mechanical propertie s (i.e., compressive strength, ultrasonic pulse velocity, splitting tensile strength, and modulus of elasticity) of roller-compacted concrete pavement (RCCP) made of electric arc furnace (EAF) slag aggregate. EAF slag with size in the range of 4.75–19 mm was used to replace natural coarse aggregate in RCCP mixtures. A new mixing method was proposed for RCCP using EAF slag aggregate. The optimum moisture content of RCCP mixtures in this study was determined by a soil compaction method. The Proctor test assessed the optimum moisture content of mixtures at various time after mixing completion (i.e., 0, 15, 30, 60, and 90 min). Then, the effect of delay in compaction on the mechanical properties of RCCP mixtures at 28 days of age containing EAF slag aggregate was studied. The results presented that the negative effect on water content in the mixture caused by the higher water absorption characteristic of EAF slag was mitigated by the new mixing method. The optimum water content and maximum dry density of RCCP experience almost no effect from the delay in compaction. The compressive strength and splitting tensile strength of RCCP using EAF slag aggregate fulfilled the strength requirements for pavement with 90 min of delay in compaction.
The purpose of this article was to investigate the influence of uncertain soil parameters on slope stability problems using the probability method. The most important soil instability is probably the inherent spatial variability of soil properties and its influence on slope safety factors. The probability method is recognized for its validity both in practice and academic research. This method of geotechnical risk management involves uncertain parameters. In this study, randomly selected uncertain parameters were combined with traditional analysis using Bishop’s simple methodology and Monte Carlo simulation. The minimum safety factor and critical slip surface of the slope stability were analyzed by Bishop’s simple method. The influence of uncertain soil parameters was analyzed by the back analysis method with Monte Carlo simulation. The calculation was controlled by a critical slip surface, and the safety factor was equal to 1. The results of the analysis show the minimum safety factor and the significant slippery surface of slope stability with the original soil strength parameters. The new soil strength parameters were recommended by Monte Carlo simulation that was used for improving the soil strength parameters in construction. In addition, probability analysis can identify an insufficient understanding of groundwater level distribution and that the assumption of a uniform distribution increases the probability of failure. Governments can use the results of water level analysis in flood warnings and flood management projects to reduce risks to life and property.
The development of a country is affected by various multifaceted factors, which are likely to generate the highest benefits. For example, developing water resources by constructing embankments to store water and for transportation must consider high resilience, particularly with the current challenges arising from climate change. Another factor that must be considered is the shortage of essential materials for embankment cores, such as clay, which is the primary material for constructing such cores. This study aims to analyze the stability of soil embankments between the change of materials, namely clay and asphaltic concrete, by varying the water level and increasing the embankment load. The result shows that the asphaltic concrete core exhibits a significantly higher stability than the clay core, such as its reduced water seepage and lower deformation. In the worst-case scenario, the asphalt concrete core has a thickness of 0.3 m and a seepage rate of 15.1 × 10−4 m3/day. Comparatively, the seepage rate of the clay core is approximately 10-times lower.